donna.cumulusnetworks.com# conf
donna.cumulusnetworks.com(config)# router bgp
donna.cumulusnetworks.com(config-router)# aggregate-address 30.0.5.0 255.255.255.0 summary-only
donna.cumulusnetworks.com(config-router)# do show run
Building configuration...
Don Slice [Tue, 24 Sep 2019 12:02:02 +0000 (05:02 -0700)]
bgpd: stop sending nexthop set by "route-map in" to eBGP peers
Problem reported that when a "neighbor x.x.x.x route-map FOO in"
set a next-hop value, that modified next-hop value was also sent
to eBGP peers. This is incorrect since bgp is expected to set
next-hop to self when sending to eBGP peers unless third party
next-hop on a shared segment is true. This fix modifies the
behavior to stop sending the modified next-hop to eBGP peers
if the route-map was applied inbound on another peer.
Ticket: CM-26025 Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Donald Sharp [Wed, 25 Sep 2019 00:40:08 +0000 (20:40 -0400)]
ospf6d: Prevent use after free
the for (ALL_LSDB...) macro was iterating over lsa,
when lsa had just been freed in these functions.
Remove the macro and make the adjustments saving lsa_next
before the free.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Philippe Guibert [Wed, 25 Sep 2019 06:51:06 +0000 (08:51 +0200)]
zebra: fix memory leak
the if_lookup_by_name_per_ns keeps a lock on the node where the
searched ifp is stored. Then this node can not be freed even if
the ifp is removed from the node. Just add the missing unlock
(as for the if_lookup_by_index_per_ns lookup function)
Fixes: b8af3fbbafc8 ("zebra: fix detection of interface renames") Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Mark Stapp [Tue, 24 Sep 2019 20:31:12 +0000 (16:31 -0400)]
libs: add yang models for zebra and nexthop
Add a yang model for some of zebra's functionality,
but the model is not integrated into the build at all yet. Also
add a model for nexthop and nexthop-group.
vdhingra [Mon, 19 Aug 2019 07:50:56 +0000 (00:50 -0700)]
bgpd : route agg. with aspath attribute is consuming lot of cycles.
While configuring aggregate route prepare the hash table first,
then prepare the aggregated aspath value just like lcomm,
ecomm and standard community.
vdhingra [Mon, 19 Aug 2019 07:50:15 +0000 (00:50 -0700)]
bgpd : route agg. with ecomm attribute is consuming lot of cycles.
While configuring aggregate route prepare the hash table first,
then prepare the aggregated ecomm value and then do the
unique sort once for ecommunity.
vdhingra [Mon, 19 Aug 2019 07:47:50 +0000 (00:47 -0700)]
bgpd : route agg. with comm attr is consuming lot of cycles.
While configuring aggregate route prepare the hash table
first, then prepare the aggregated standard comm value
and then do the unique sort once for standard community.
vdhingra [Mon, 12 Aug 2019 12:13:14 +0000 (05:13 -0700)]
bgpd : route agg. with lcomm attribute is consuming lot of cycles.
While configuring aggregate route prepare the hash table first,
then prepare the aggregated lcomm value and then do the unique
sort once for large community.
pimd: Mark Default TOS Values for PIM & IGMP Outgoing packets
This will facilitate the Hardware to prefer control packets over
Normal Data packets while queuing, so that during congestion, the
chance of dropping control packet will be minimised.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Chirag Shah [Thu, 12 Sep 2019 00:29:04 +0000 (17:29 -0700)]
bgpd: fix advertise-svi-ip upon vni-svi up-down
When a VxLAN interface comes up new vni up event is sent
to bgpd, which triggers bgpd to sync advertise-svi-macip
to zebra. At this point, vni is present but the associated
SVI may not be present.
When SVI comes up, vni add event sent to bgpd (with associated
vrf update). Bgpd already has vni present so
advertise-svi-macip is not synced to Zebra.
To fix,
When advertise-svi-macip flag is synced first time, cache it in
zebra context even though vni associated SVI is not present.
when SVI comes up, interface address add event triggers
new MAC-IP route add to bgpd.
Validated via running a sequence of steps in symmetric
routing topology.
- Enable advertise-svi-macip at l2vni level under bgp default
instance (afi/safi, l2vpn/evpn)
- Flap l2vni associated SVI interface.
- Check the output of 'show bgp l2vpn evpn route' command for
MAC-IP route of the SVI's (MAC and IP address).
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Donald Sharp [Mon, 23 Sep 2019 17:49:11 +0000 (13:49 -0400)]
bgpd: When displaying update group information include coalesce time
Include the coalesce time for the update group `show bgp update-group`
command as well as print out how long the coalesce timer waited
for on the timer pop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The "abort_if_not_found" parameter of nb_running_get_entry()
should be set to true only when this function is called during the
NB_EV_APPLY phase of a northbound callback. Failure to respect this
can lead to crashes when multiple configuration changes are being
committed at the same time.
The new "event-counters" grouping is almost a 1:1 copy of the same
grouping from the IETF IS-IS module, except for the "lan-dis-changes"
leaf which was skipped (more work needs to be done to support it).
vtysh: add the "show yang operational-data" command
The right way to implement this command in vtysh is the following:
* Send the command to each running FRR daemon;
* Collect the command output from each daemon;
* Parse the text outputs into libyang lyd_node structures. Then merge
all these data trees into a single one. Finally, print the merged
data trees to the standard output (libyang will take care of
combining duplicate nodes as necessary).
What this commit does is to allow vtysh to send the "show yang
operational-data" command to a single daemon only (the last
parameter). It's a quick workaround to allow us to write topotests
using YANG-modeled data until we do the real thing (full vtysh
northbound integration).
isisd, yang: implement read-only list of adjacencies
The new "adjacency-state" grouping is almost a 1:1 copy of the
same grouping from the IETF IS-IS module, except for the "usage"
and "lastuptime" leafs that were skipped (more work needs to be
done to support those).
This command is defined in the lib/northbound_cli.c file, which
is not being parsed by vtysh since most commands from there need
special handling in the context of vtysh. The "debug northbound"
command, however, can be made available to vtysh without problems.
Introduce a new DEFUNSH to do that.
Donald Sharp [Fri, 20 Sep 2019 10:41:02 +0000 (06:41 -0400)]
bgpd: Invalid NH's should send an apropriate reason code
RFC 4271 sec 6.3 p33, In the case of a BGP_NEXTHOP attribute with an
incorrect value, FRR is supposed to send a notification
and include 'Corresponding type, length and value of the NEXT_HOP
attribute in the notification data.
Fixes: #4997 Signed-off-by: Nikos <ntriantafillis@gmail.com> Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 18 Sep 2019 20:20:04 +0000 (16:20 -0400)]
*: Add infrastructure to support zapi interface callbacks
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Wed, 18 Sep 2019 17:42:46 +0000 (13:42 -0400)]
lib, zebra: Allow for interface deletion when kernel event happens
When zebra gets a callback from the kernel that an interface has
actually been deleted *and* the end users has not configured
the interface, then allow for deletion of the interface from zebra.
This is especially important in a docker environment where containers
and their veth interfaces are treated as ephermeal. FRR can quickly
have an inordinate amount of interfaces sitting around that are
not in the kernel and we have no way to clean them up either.
My expectation is that this will cause a second order crashes
in upper level protocols, but I am not sure how to catch these
and fix them now ( suggestions welcome ). There are too many
use patterns and order based events that I cannot know for certain
that we are going to see any at all, until someone sees this problem
as a crash :( I do not recommend that this be put in the current
stabilization branch and allow this to soak in master for some time
first.
Testing:
sharpd@donna ~/frr4> sudo ip link add vethdj type veth peer name vethjd
sharpd@donna ~/frr4> sudo ip link add vethaa type veth peer name vethab
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
vethab down default
vethdj down default
vethjd down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link set vethaa up
sharpd@donna ~/frr4> sudo ip link set vethab up
sharpd@donna ~/frr4> sudo ip link del vethdj
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa up default
vethab up default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link del vethaa
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link add vethaa type veth peer name vethab
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
vethab down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo vtysh -c "show run"
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 192.168.3.0/24 192.168.209.1
ip route 192.168.4.0/24 blackhole
ip route 192.168.5.0/24 192.168.209.1
ip route 192.168.6.0/24 192.168.209.1
ip route 192.168.7.0/24 99.99.99.99 nexthop-vrf EVA
ip route 192.168.8.0/24 192.168.209.1
ip route 4.5.6.7/32 12.13.14.15
!
interface dummy1
ip address 12.13.14.15/32
!
interface vethaa
description FROO
!
line vty
!
end
sharpd@donna ~/frr4> sudo ip link del vethaa
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo vtysh -c "show run"
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 192.168.3.0/24 192.168.209.1
ip route 192.168.4.0/24 blackhole
ip route 192.168.5.0/24 192.168.209.1
ip route 192.168.6.0/24 192.168.209.1
ip route 192.168.7.0/24 99.99.99.99 nexthop-vrf EVA
ip route 192.168.8.0/24 192.168.209.1
ip route 4.5.6.7/32 12.13.14.15
!
interface dummy1
ip address 12.13.14.15/32
!
interface vethaa
description FROO
!
line vty
!
end
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vdhingra [Fri, 23 Aug 2019 12:28:43 +0000 (05:28 -0700)]
Zebra: Rectifying the log messages.
This change addresses the following :
1. Ensures zlog_debug should be under DEBUG macro check
2. Ensures zlog_err and zlog_warn wherever applicable.
3. Removed few posivite logs from fpm handling, whose frequency is high.
bgpd: Fixed 'show bgp l2vpn evpn json' to display all routes
Fixed the following:
1. Print the complete header for 'show bgp l2vpn evpn' command
2. Print the Route Distinguisher header
3. Print all relevant routes in json (some were being skipped)
projects / mirror / frr.git / log