Donald Sharp [Wed, 22 Mar 2023 15:35:28 +0000 (11:35 -0400)]
bgpd: Ensure suppress-fib-pending works with network statements
The flag for telling BGP that a route is expected to be installed
first before notifying a peer was always being set upon receipt
of a path that could be accepted as bestpath. This is not correct:
imagine that you have a peer sending you a route and you have a
network statement that covers the same route. Irrelevant if the
network statement would win the flag on the dest was being set
in bgp_update. Thus you could get into a situation where
the network statement path wins but since the flag is set on
the node, it will never be announced to a peer.
Let's just move the setting of the flag into bgp_zebra_announce
and _withdraw. In _announce set the flag to TRUE when suppress-fib
is enabled. In _withdraw just always unset the flag as that a withdrawal
does not need to wait for rib removal before announcing. This will
cover the case when a network statement is added after the route has
been learned from a peer.
Donald Sharp [Tue, 21 Mar 2023 19:06:00 +0000 (15:06 -0400)]
bgpd: Add vrf name and peer name to some bgp debugs
Some debugs were especially hard to figure out in bgp_route.c
a) If using a %p pointer to print the bgp_path_info this
is pretty useless. Print where it came from instead
b) Use A.B.C.D/M(VRFNAME) when outputing the prefix
Donald Sharp [Mon, 20 Mar 2023 20:07:20 +0000 (16:07 -0400)]
lib: on bfd peer shutdown actually stop event
When deleting a bfd peer during shutdown, let's ensure
that any scheduled events are actually stopped.
==7759== Invalid read of size 4
==7759== at 0x48BF700: _bfd_sess_valid (bfd.c:419)
==7759== by 0x48BF700: _bfd_sess_send (bfd.c:470)
==7759== by 0x492F79C: thread_call (thread.c:2008)
==7759== by 0x48E9BD7: frr_run (libfrr.c:1223)
==7759== by 0x1C739B: main (bgp_main.c:550)
==7759== Address 0xfb687a4 is 4 bytes inside a block of size 272 free'd
==7759== at 0x48369AB: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==7759== by 0x48BFA5A: bfd_sess_free (bfd.c:535)
==7759== by 0x2B7034: bgp_peer_remove_bfd (bgp_bfd.c:339)
==7759== by 0x29FF8A: peer_free (bgpd.c:1160)
==7759== by 0x29FF8A: peer_unlock_with_caller (bgpd.c:1192)
==7759== by 0x2A0506: peer_delete (bgpd.c:2633)
==7759== by 0x208190: bgp_stop (bgp_fsm.c:1639)
==7759== by 0x20C082: bgp_event_update (bgp_fsm.c:2751)
==7759== by 0x492F79C: thread_call (thread.c:2008)
==7759== by 0x48E9BD7: frr_run (libfrr.c:1223)
==7759== by 0x1C739B: main (bgp_main.c:550)
==7759== Block was alloc'd at
==7759== at 0x4837B65: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==7759== by 0x48F53AF: qcalloc (memory.c:116)
==7759== by 0x48BF98D: bfd_sess_new (bfd.c:397)
==7759== by 0x2B76DC: bgp_peer_configure_bfd (bgp_bfd.c:298)
==7759== by 0x2B76DC: bgp_peer_configure_bfd (bgp_bfd.c:279)
==7759== by 0x29BA06: peer_group2peer_config_copy (bgpd.c:2803)
==7759== by 0x2A3D96: peer_create_bind_dynamic_neighbor (bgpd.c:4107)
==7759== by 0x2A4195: peer_lookup_dynamic_neighbor (bgpd.c:4239)
==7759== by 0x21AB72: bgp_accept (bgp_network.c:422)
==7759== by 0x492F79C: thread_call (thread.c:2008)
==7759== by 0x48E9BD7: frr_run (libfrr.c:1223)
==7759== by 0x1C739B: main (bgp_main.c:550)
tl;dr -> Effectively, in this test setup we have 300 dynamic bgp
sessions all of which are using bfd. When a peer collision is detected
or we remove the peers, if an event has been scheduled but not actually
executed yet the event event was not actually being stopped, leaving
the bsp pointer on the thread->arg and causing a crash when it is
executed.
Issue:
When a netns is deleted, since zebra doesn’t receive interface down/delete
notifications from kernel, it manually deletes the interface without removing
the association between zebra_l3vni and the interface that is being deleted
(i.e it deletes the interface without setting “zl3vni->vxlan_if” to NULL).
Later, during the deletion of netns, when zl3vni_rmac_uninstall() is called to
uninstall the remote RMAC from the kernel, zebra ends up accessing stale
“zl3vni->vxlan_if” pointer, which now points to freed memory.
This was causing heap use-after-free.
Fix:
Before zebra starts deleting the interfaces when it receives netns delete notification,
appropriate functions() are being called to remove the association between evpn structs
and interface and set “zl3vni->vxlan_if” to NULL. This ensures that when
zl3vni_rmac_uninstall() is called during netns deletion, it will bail because
“zl3vni->vxlan_if” is NULL.
David Lamparter [Sun, 19 Mar 2023 11:38:49 +0000 (12:38 +0100)]
nhrpd: drop peer references on freeing cache entry
When dropping an interface (e.g. at shutdown) while there are still
valid cache entries, the reference held on the cache entries' peer
pointers was leaking.
Fixes: #12505 Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Renato Westphal [Sat, 18 Mar 2023 01:48:59 +0000 (22:48 -0300)]
ospfd: Fix inconsistency in LSDB JSON output
As it can be seen below, the LSDB JSON output varies depending
whether a filter option is specified or not (e.g. "adv-router",
"self-originate"):
> show ip ospf database router json
{
"routerId":"3.3.3.3",
"routerLinkStates":{
"areas":{
"0.0.0.0":[
{
"lsaAge":175,
"options":"*|-|-|-|-|-|E|-",
[snip]
> show ip ospf database router adv-router 2.2.2.2 json
{
"routerId":"3.3.3.3",
"Router Link States":{
"0.0.0.0":{
"2.2.2.2":{
"lsaAge":193,
"options":"*|-|-|-|-|-|E|-",
[snip]
This inconsistency is undesirable since it makes this data harder to
consume programmatically. Also, in the second output, "Router Link
States" is used as a JSON key, which doesn't conform to our JSON
guidelines (JSON keys need to be camelCased).
Make the required changes to ensure the first output structure is used,
regardless if any output filter is used or not.
pbr-map map6 seq 1
match src-ip 2000::200:100:100:0/96
match dst-ip 2000::100:100:100:0/96
set nexthop-group group3
Before:
torc-12(config)# pbr-map map6 seq 1
torc-12(config-pbr-map)# no match src-ip 2000::200:100:100:0/96
Cannot mismatch families within match src/dst
After:
torc-12(config)# pbr-map map6 seq 1
torc-12(config-pbr-map)# no match src-ip 2000::200:100:100:0/96
torc-12(config-pbr-map)#
Donald Sharp [Fri, 17 Mar 2023 19:40:33 +0000 (15:40 -0400)]
bgpd: Prevent Null pointer deref when outputting data
Crash:
(gdb) bt
0 0x00007fee27de15cb in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
1 0x00007fee280ecd9c in core_handler (signo=11, siginfo=0x7ffe56001bb0, context=<optimized out>) at lib/sigevent.c:264
2 <signal handler called>
3 0x0000555e321c41b2 in prefix_rd2str (prd=0x10, buf=buf@entry=0x7ffe56002080 "27.0.0.R\340\373\062\062^U", size=size@entry=28) at bgpd/bgp_rd.c:168
4 0x0000555e321c431a in printfrr_prd (buf=0x7ffe560021a0, ea=<optimized out>, ptr=<optimized out>) at bgpd/bgp_rd.c:224
5 0x00007fee2812069b in vbprintfrr (cb_in=cb_in@entry=0x7ffe56002330, fmt0=fmt0@entry=0x555e3229a3ad " RD: %pRD\n", ap=ap@entry=0x7ffe560023d8) at lib/printf/vfprintf.c:564
6 0x00007fee28122ef7 in vasnprintfrr (mt=mt@entry=0x7fee281cb5e0 <MTYPE_VTY_OUT_BUF>, out=out@entry=0x7ffe560023f0 " RD: : R\n", outsz=outsz@entry=1024, fmt=fmt@entry=0x555e3229a3ad " RD: %pRD\n", ap=ap@entry=0x7ffe560023d8) at lib/printf/glue.c:103
7 0x00007fee28103504 in vty_out (vty=vty@entry=0x555e33f82d10, format=format@entry=0x555e3229a3ad " RD: %pRD\n") at lib/vty.c:190
8 0x0000555e32185156 in bgp_evpn_es_show_entry_detail (vty=0x555e33f82d10, es=0x555e33c38420, json=<optimized out>) at bgpd/bgp_evpn_mh.c:2655
9 0x0000555e32188fe5 in bgp_evpn_es_show (vty=vty@entry=0x555e33f82d10, uj=false, detail=true) at bgpd/bgp_evpn_mh.c:2721
notice prd=0x10 in #3. This is because in bgp_evpn_mh.c we are sending &es->es_base_frag->prd.
There is one spot in the code where during output the es->es_base_frag is checked for non nullness
Let's just make sure it's right in all the places.
Donatas Abraitis [Fri, 17 Mar 2023 12:48:35 +0000 (14:48 +0200)]
lib: Adjust only `any` flag for prefix-list entries if destroying
Before this patch, if we destroy `any` flag for a prefix-list entry, we always
set destination as 0.0.0.0/0 and/or ::/0.
This means that, if we switch from `ip prefix-list r1-2 seq 5 deny any` to
`ip prefix-list r1-2 seq 5 permit 10.10.10.10/32` we will have
`permit any` eventually, which broke ACLs.
David Lamparter [Fri, 17 Mar 2023 12:34:46 +0000 (13:34 +0100)]
pimd: stop t_sg_expire in MLD NOINFO transition
When hitting gm_sg_update from the S,G expiry timer, t_sg_expire will
already be cancelled. But when arriving there from e.g. the MLD packet
getting cleared out, it'll still be running.
Clear out the timer if we arrive with `has_expired == true`.
rgirada [Fri, 17 Mar 2023 09:17:39 +0000 (09:17 +0000)]
ospfd: Ospf ABR doesnt Advertise LSA summary
Description:
OSPF ABR will summarise the networks based on configured range
and re-advtertise the summarised route. But if configured range
prefix id is same as one of the subset of routes prefix id then
as per rcf2328 Appendex-E recommendation, it will prepare the LSID and originate.
While re-advertising, it is using ospf LSDB instead of area specific
LSDB which is making it fail to re-advertise the summary lsa.
Fixed this by passing correct LSDB pointer.
Donald Sharp [Thu, 16 Mar 2023 23:19:04 +0000 (19:19 -0400)]
bgpd: Always restart timer from scratch in OpenConfirm/Established
Imagine this scenario:
A peer has very large hold/keepalive timers of 600/200. This peer is
using the DataCenter default time. As such the open will cause
the t_holdtime to be negotiated to 600 seconds. Now also imagine
that both peers are in update-delay. If we do not restart the
timers and both peers are in Update Delay, we will continously
reset the peer because the hold time will be hit( since the peer
is not sending us any data ).
Donald Sharp [Wed, 15 Mar 2023 17:51:19 +0000 (13:51 -0400)]
lib: Speedup prefix-list readin by a large factor
Reading in prefix-lists is reading in the specified
prefix list and validating that the prefix is unique
2 times. This makes no sense. Relax the requirement
that a prefix list can limit this as well as completely
remove this check. Validation then just becomes
does this prefix-list specified actually make sense
and that is taken care of by the the cli code.
Reading in prefix-lists was looking for duplicate prefixes
2 times instead of doing it just one time. Let's just
not do it at all.
By doing this change, The code changes from never
completing for a 27k long prefix-list to taking
just under 30 seconds, with 4 daemons processing
this data.
Donald Sharp [Thu, 16 Mar 2023 14:24:25 +0000 (10:24 -0400)]
bgpd: Use interface name instead of pointer value
Log message is borked in a manner that makes it unusable:
bgpd[52]: [VX6SM-8YE5W][EC 33554460] 2000:31:0:53::2: nexthop_set failed, resetting connection - intf 0x561eb9005a30
David Lamparter [Thu, 16 Mar 2023 10:00:02 +0000 (11:00 +0100)]
bgpd: fix NULL argument warning
gcc 12.2.0 complains `error: ‘%s’ directive argument is null`, even
though all enum values are covered with a string. Let's just go with a
`???` default.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
anlan_cs [Thu, 9 Mar 2023 01:34:07 +0000 (09:34 +0800)]
yang, bgpd: Fix "aggregator-asn" to support asdot
The following command is not working:
> (routemap) set aggregator as ASNUM A.B.C.D
Since "aggregator-asn" has already supported asdot,
fixed it with new yang type. Extra ASN validation
(leading zeroes for instance) are done in the validate
hook of the yang leaf.
Signed-off-by: anlan_cs <vic.lan@pica8.com> Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Chirag Shah [Wed, 15 Mar 2023 04:32:40 +0000 (21:32 -0700)]
tools: frr-reload fix list value not present
Check for value present in list before removing
as in certain python3 ValueError traceback is observed.
Traceback (most recent call last):
File "/usr/lib/frr/frr-reload.py",
line 2278, in <module>
(lines_to_add, lines_to_del, restart_frr)
= compare_context_objects(newconf, running)
File "/usr/lib/frr/frr-reload.py",
line 1933, in compare_context_objects
lines_to_add, lines_to_del
File "/usr/lib/frr/frr-reload.py",
line 1549, in ignore_delete_re_add_lines
lines_to_del.remove((ctx_keys, line))
ValueError: list.remove(x): x not in list
Donald Sharp [Sun, 12 Mar 2023 00:37:21 +0000 (19:37 -0500)]
pimd: IN_MULTICAST needs host order
New correct behavior:
eva# conf
eva(config)# ip pim rp 192.168.1.224 224.0.0.0/24
No Path to RP address specified: 192.168.1.224
eva(config)# ip pim rp 224.1.2.3 224.0.0.0/24
% Bad RP address specified: 224.1.2.3
eva(config)#
Fixes: #12970 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Donald Sharp [Sat, 11 Mar 2023 17:05:44 +0000 (12:05 -0500)]
bgpd: Increment version number even when no data is sent
When an update group decides to not send a prefix
announcement because it has not changed, still increment
the version number. Why? To allow for the situation
where you have say 2 peers in 1 peer group and shortly
after they come up a 3rd peer comes up. It will be
placed into a separate update group and could be
coalesced down, when it finishes updating all data
to it. Now imagine that a single prefix changes at
this point in time as well. Then first 2 peers may
decide to not send the data, since nothing has changed.
While the 3rd peer will and since the versions numbers
never match they will never coalesce. So when the decision
is made to skip, update the version number as well.
zebra: add json support when "show zebra mpls" returns nothing
The "show zebra mpls .. json" vty command may return empty information
in case the MPLS database is empty or a given label entry is not
available. When those errors occur, add the braces to return a
valid json format.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Donald Sharp [Wed, 8 Mar 2023 18:24:58 +0000 (13:24 -0500)]
zebra: Make GR debug logs at least vrf aware
The GR debug logs are doing all sorts of wonderful stuff
but they were not actually displaying anything useful to the operator
about what vrf we are operating in.
projects / mirror / frr.git / log