https://github.com/FRRouting/frr/pull/11465 enabled account verification,
but the pam config declares rootok as sufficient in authentication only
and not in account verification, what causes warning in the log:
Add the documentation for the `behavior usid` command to zebra.
When the `behavior usid` command is set, a flag is added to the locator
to indicate that the locator is a uSID locator. When a locator is
specified as a uSID locator, the bgpd will install SRv6 behaviors with
the uSID in the dataplane and use the SRv6 uSID codepoints in the BGP
update message.
This test ensures that the command `behavior usid` works properly.
When the `behavior usid` command is set, a flag is added to the locator
to indicate that the locator is a uSID locator. This test verifies that
the locator works correctly when you set / unset the `behavior usid`
command.
Install a new command `behavior usid` into the `SRV6_LOC_NODE` CLI node.
This command allows the user to set/unset the `SRV6_LOCATOR_USID` flag
for an SRv6 locator. The `SRV6_LOCATOR_USID` flag indicates whether a
locator is a uSID locator or not. When the flag is set, the routing
daemons (e.g., bgpd) will install SRv6 behaviors with the uSID in the
dataplane.
In this commit, we add two helper functions
`zebra_notify_srv6_locator_add` and `zebra_notify_srv6_locator_delete`.
These functions are used to notify locator additions/deletions to
zclients.
bgpd: Use SRv6 codepoints in the BGP Advertisement
Currently bgpd uses the opaque codepoint (0xFFFF) in the BGP
advertisement. In this commit, we update bgpd to use the SRv6 codepoints
defined in the IANA SRv6 Endpoint Behaviors Registry
(https://www.iana.org/assignments/segment-routing/segment-routing.xhtml)
In this commit, we introduce a new enumeration to encode the SRv6
Endpoint Behaviors codepoints defined in the IANA SRv6 Endpoint
Behaviors Registry
(https://www.iana.org/assignments/segment-routing/segment-routing.xhtml).
Donald Sharp [Tue, 8 Nov 2022 19:38:02 +0000 (14:38 -0500)]
bgpd: rpki was decrementing the node lock one time too many
The code was this:
1) match = bgp_table_subtree_lookup(rrp->bgp->rib[rrp->afi][rrp->safi],
&rrp->prefix);
2) node = match;
while (node) {
if (bgp_dest_has_bgp_path_info_data(node)) {
revalidate_bgp_node(node, rrp->afi, rrp->safi);
}
3) node = bgp_route_next_until(node, match);
}
if (match)
4) bgp_dest_unlock_node(match);
At 1) match was locked and became +1
At 2) match and node are now equal
At 3) On first iteration, match is decremented( as that node points
at it ) and the next item is locked, if it is found, and returned which becomes node
If 3 is run again because node is non-null then, current node is decremented
and the next node found is incremented and returned which becomes node again.
So if we get to 4) match is unlocked again which is now a double unlock
which, frankly, is not good. In all code paths that I can see the
test for `if (match) ...` is not needed so let's just remove it.
zebra/netconf_netlink.c: In function 'netlink_netconf_change':
zebra/netconf_netlink.c:109:32: error: 'AF_MPLS' undeclared (first use in this function)
109 | if (ncm->ncm_family == AF_MPLS)
| ^~~~~~~
Donald Sharp [Tue, 8 Nov 2022 12:36:56 +0000 (07:36 -0500)]
bgpd: Make rpki soft_reconfig calling events
An end operator is showing cases with multiple bgp feeds
and a rpki table that calling the revalidation functions
is extremely expensive and they are seeing lots of thread
WARNS about timers being late and eventually the whole
thing gets unresponsive. Let's break up soft reconfiguration
in to a series of events per peer so that all the work
for this is not done at the same exact time.
ospf6d: Show if the interface is passive for `show ipv6 ospf6 interface`
donatas-pc# sh ipv6 ospf6 interface enp3s0
enp3s0 is up, type BROADCAST
Interface ID: 2
Internet Address:
inet : 192.168.10.17/24
inet6: fe80::ca5d:fd0d:cd8:1bb7/64
Instance ID 0, Interface MTU 1500 (autodetect: 1500)
MTU mismatch detection: enabled
Area ID 0.0.0.0, Cost 1000
State Waiting, Transmit Delay 1 sec, Priority 1
Timer intervals configured:
Hello 10(8.149), Dead 40, Retransmit 5
DR: 0.0.0.0 BDR: 0.0.0.0
Number of I/F scoped LSAs is 1
0 Pending LSAs for LSUpdate in Time 00:00:00 [thread off]
0 Pending LSAs for LSAck in Time 00:00:00 [thread off]
Authentication Trailer is disabled
donatas-pc# con
donatas-pc(config)# int enp3s0
donatas-pc(config-if)# ipv6 ospf6 passive
donatas-pc(config-if)# do sh ipv6 ospf6 interface enp3s0
enp3s0 is up, type BROADCAST
Interface ID: 2
Internet Address:
inet : 192.168.10.17/24
inet6: fe80::ca5d:fd0d:cd8:1bb7/64
Instance ID 0, Interface MTU 1500 (autodetect: 1500)
MTU mismatch detection: enabled
Area ID 0.0.0.0, Cost 1000
State Waiting, Transmit Delay 1 sec, Priority 1
Timer intervals configured:
No Hellos (Passive interface)
DR: 0.0.0.0 BDR: 0.0.0.0
Number of I/F scoped LSAs is 1
0 Pending LSAs for LSUpdate in Time 00:00:00 [thread off]
0 Pending LSAs for LSAck in Time 00:00:00 [thread off]
Authentication Trailer is disabled
donatas-pc(config-if)#
Seems that if using PCRE2, we need to escape outer `()` chars and `|`. Sounds
like a bug.
But this is only with some older PCRE2 versions. With >= 10.36, I wasn't able
to reproduce this, everything is fine and working as expected.
Adding _FRR_PCRE2_POSIX definition because pcre2posix.h does not have
include's guard.
zebra: Reuse netinet/if_ether.h to avoid redefinition of struct ethhdr
In file included from /usr/include/net/ethernet.h:10,
from ./lib/prefix.h:26,
from zebra/tc_netlink.c:32:
/usr/include/netinet/if_ether.h:115:8: error: redefinition of 'struct ethhdr'
115 | struct ethhdr {
| ^~~~~~
In file included from zebra/tc_netlink.c:28:
/usr/include/linux/if_ether.h:169:8: note: originally defined here
169 | struct ethhdr {
| ^~~~~~
Donald Sharp [Mon, 24 Oct 2022 13:25:54 +0000 (09:25 -0400)]
*: Add ability for daemons to notice resilience changes
This patch just introduces the callback mechanism for the
resilient nexthop changes so that upper level daemons
can take advantage of the change. This does nothing
at this point but just call some code.
Donald Sharp [Mon, 24 Oct 2022 18:08:35 +0000 (14:08 -0400)]
lib: When adding to front of list ensure we handle tail to
When inserting to the front of a list with listnode_add_head
if the list is empty, the tail will not be properly set and
subsuquent calls to insert/remove will cause the function
to crash.
Donald Sharp [Tue, 1 Nov 2022 12:00:14 +0000 (08:00 -0400)]
lib, zebra: Allow for zebra to recognize that a route has gotten desynced
FRR does not use the NLM_F_APPEND semantics ( in fact I would argue that
the NLM_F_APPEND semantics just introduce pain for all parties involved )
I would also argue that most people who use the kernel netlink api
have recognized that NLM_F_APPEND for a route is a recipe for disaster
that is well documented and as such it is not used as anything other
than a curiousity by operators.
Are 2 great examples of how confusing it is for anyone in user
space to know what the correct thing to do is. Given that
new fields can be added with no semantics to allow us to know
what has resulted in a change or not.
In an attempt to recognize this, let's note that FRR
believes it has gotten out of sync with the kernel.
Future commits will react to the desynchronized route
and request from the kernel a reload of that specific
route if possible.
Donald Sharp [Fri, 4 Nov 2022 00:39:39 +0000 (20:39 -0400)]
bgpd: Limit snmp trap for backwards state movement from established
Currently the bgp mib specifies two traps:
a) Into established state
b) transition backwards from a state
b) really is an interesting case. It means transitioning
from say established to starting over. It can also
mean when bgp is trying to connect and that fails and
the state transitions backwards.
Now let's imagine 500 peers with tight timers (say a data center)
and there is network trauma you have just created an inordinately
large number of traps for each peer.
Let's limit FRR to changing from the old status as Established
to something else. This will greatly limit the trap but it
will also be something end operators are actually interested in.
I actually had several operators say they had to write special code
to ignore all the backward state transitions that they didn't care
about.
Donald Sharp [Wed, 2 Nov 2022 17:24:48 +0000 (13:24 -0400)]
bgpd: Ensure that bgp open message stream has enough data to read
If a operator receives an invalid packet that is of insufficient size
then it is possible for BGP to assert during reading of the packet
instead of gracefully resetting the connection with the peer.
anlan_cs [Mon, 31 Oct 2022 10:14:07 +0000 (06:14 -0400)]
include: remove one unused macro
In "rtnetlink.h", four items are a group, e.g. 116/117/118/119 should be
a group. But "RTM_SETHWFLAGS" is not in use and has nothing to do with
"NEXTHOPBUCKET".
After comparing with kernel header, better remove it imo.
projects / mirror / frr.git / log