zhou-run [Sat, 11 May 2024 07:30:38 +0000 (15:30 +0800)]
isisd: fix crash when deactivating ISIS adjacency on the interface.
1. When the command "no <ip|ipv6> router isis WORD" is executed on the interface, it invokes list_delete_all_node to iterate and release the memory of all nodes in the cirtcuit->u.bc.adjdb[1] linked list. However, the nodes are not unlinked during this traversal process, leading to the call of *list->del to delete the data of the linked list nodes.
2. For ISIS, deleting the data of the linked list nodes is done by calling isis_delete_adj. Subsequently, isis_level2_adj_up will be called to iterate and query the cirtcuit->u.bc.adjdb[1] linked list. If there are many neighbors on this interface, accessing the memory of the released linked list nodes may occur.
3. Not limited to ISIS, if the linked list is not unlinked during the deletion of all nodes in process 1, *list->del should not be allowed to iterate through the list again.
The backtrace is as follows:
(gdb) bt
at isisd/isis_csm.c:196
context=<optimized out>) at lib/northbound.c:1131
errmsg_len=errmsg_len@entry=8192) at lib/northbound.c:1356
at lib/northbound.c:1473
errmsg=errmsg@entry=0x7ffc0ced38d0 "", errmsg_len=errmsg_len@entry=8192) at lib/northbound.c:906
comment=comment@entry=0x0, transaction_id=transaction_id@entry=0x0, errmsg=errmsg@entry=0x7ffc0ced38d0 "", errmsg_len=8192) at lib/northbound.c:938
filter=FILTER_RELAXED) at lib/command.c:971
at lib/command.c:1030
vtysh=vtysh@entry=0) at lib/command.c:1198
at isisd/isis_csm.c:196
context=<optimized out>) at lib/northbound.c:1131
errmsg_len=errmsg_len@entry=8192) at lib/northbound.c:1356
at lib/northbound.c:1473
errmsg=errmsg@entry=0x7ffc0ced38d0 "", errmsg_len=errmsg_len@entry=8192) at lib/northbound.c:906
comment=comment@entry=0x0, transaction_id=transaction_id@entry=0x0, errmsg=errmsg@entry=0x7ffc0ced38d0 "", errmsg_len=8192) at lib/northbound.c:938
filter=FILTER_RELAXED) at lib/command.c:971
at lib/command.c:1030
vtysh=vtysh@entry=0) at lib/command.c:1198
0 0x00007f7d6e541fe1 in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
1 0x00007f7d6e63188c in core_handler (signo=11, siginfo=0x7ffc0ced2630, context=<optimized out>) at lib/sigevent.c:262
2 <signal handler called>
3 0x00005647f5b11568 in isis_level2_adj_up (area=area@entry=0x5647f7c89830) at isisd/isis_lsp.c:423
4 0x00005647f5b14073 in isis_reset_attach_bit (adj=0x5647f7cad690) at isisd/isis_lsp.c:474
5 lsp_handle_adj_state_change (adj=0x5647f7cad690) at isisd/isis_lsp.c:2162
6 0x00005647f5b53675 in hook_call_isis_adj_state_change_hook (adj=adj@entry=0x5647f7cad690) at isisd/isis_adjacency.c:152
7 0x00005647f5b536f3 in isis_delete_adj (arg=0x5647f7cad690) at isisd/isis_adjacency.c:167
8 0x00007f7d6e5fe003 in list_delete_all_node (list=0x5647f7c88060) at lib/linklist.c:316
9 0x00007f7d6e5fe069 in list_delete (list=list@entry=0x5647f7c84708) at lib/linklist.c:326
10 0x00005647f5b0872e in isis_circuit_down (circuit=0x5647f7c84620) at isisd/isis_circuit.c:835
11 0x00005647f5b09f81 in isis_csm_state_change (event=event@entry=IF_DOWN_FROM_Z, circuit=circuit@entry=0x5647f7c84620, arg=arg@entry=0x5647f7c7f7a0)
at isisd/isis_csm.c:196
12 0x00005647f5b083b0 in isis_circuit_disable (circuit=0x5647f7c84620) at isisd/isis_circuit.c:100
13 isis_circuit_del (circuit=0x5647f7c84620) at isisd/isis_circuit.c:200
14 0x00005647f5b434f5 in lib_interface_isis_destroy (args=<optimized out>) at isisd/isis_nb_config.c:2612
15 0x00007f7d6e61347a in nb_callback_destroy (errmsg_len=2, errmsg=0x7ffc0ced38d0 "", dnode=0x5647f7c948f0, event=NB_EV_APPLY, nb_node=<optimized out>,
context=<optimized out>) at lib/northbound.c:1131
16 nb_callback_configuration (context=<optimized out>, event=event@entry=NB_EV_APPLY, change=change@entry=0x5647f7cb6680, errmsg=errmsg@entry=0x7ffc0ced38d0 "",
errmsg_len=errmsg_len@entry=8192) at lib/northbound.c:1356
17 0x00007f7d6e6138b7 in nb_transaction_process (errmsg_len=8192, errmsg=0x7ffc0ced38d0 "", transaction=0x5647f7c94080, event=NB_EV_APPLY)
at lib/northbound.c:1473
18 nb_candidate_commit_apply (transaction=0x5647f7c94080, save_transaction=save_transaction@entry=true, transaction_id=transaction_id@entry=0x0,
errmsg=errmsg@entry=0x7ffc0ced38d0 "", errmsg_len=errmsg_len@entry=8192) at lib/northbound.c:906
19 0x00007f7d6e61403d in nb_candidate_commit (context=context@entry=0x7ffc0ced38c0, candidate=<optimized out>, save_transaction=save_transaction@entry=true,
comment=comment@entry=0x0, transaction_id=transaction_id@entry=0x0, errmsg=errmsg@entry=0x7ffc0ced38d0 "", errmsg_len=8192) at lib/northbound.c:938
20 0x00007f7d6e616ec9 in nb_cli_classic_commit (vty=0x5647f7cae160) at lib/northbound_cli.c:64
21 0x00007f7d6e6176a8 in nb_cli_apply_changes (vty=0x5647f7cae160, xpath_base_fmt=<optimized out>) at lib/northbound_cli.c:268
22 0x00007f7d6e5d918e in cmd_execute_command_real (vline=vline@entry=0x5647f7cae140, vty=vty@entry=0x5647f7cae160, cmd=cmd@entry=0x0, up_level=up_level@entry=0,
filter=FILTER_RELAXED) at lib/command.c:971
23 0x00007f7d6e5d951d in cmd_execute_command (vline=vline@entry=0x5647f7cae140, vty=vty@entry=0x5647f7cae160, cmd=cmd@entry=0x0, vtysh=vtysh@entry=0)
at lib/command.c:1030
24 0x00007f7d6e5d9770 in cmd_execute (vty=vty@entry=0x5647f7cae160, cmd=cmd@entry=0x5647f7cb48a0 "no ip router isis 10", matched=matched@entry=0x0,
vtysh=vtysh@entry=0) at lib/command.c:1198
25 0x00007f7d6e6485e6 in vty_command (vty=vty@entry=0x5647f7cae160, buf=0x5647f7cb48a0 "no ip router isis 10") at lib/vty.c:483
26 0x00007f7d6e648d01 in vty_execute (vty=vty@entry=0x5647f7cae160) at lib/vty.c:1246
27 0x00007f7d6e64ba40 in vtysh_read (thread=<optimized out>) at lib/vty.c:2090
28 0x00007f7d6e64348d in thread_call (thread=thread@entry=0x7ffc0ced8310) at lib/thread.c:1958
29 0x00007f7d6e5fd4a8 in frr_run (master=0x5647f79a43d0) at lib/libfrr.c:1184
30 0x00005647f5b050f3 in main (argc=5, argv=<optimized out>, envp=<optimized out>) at isisd/isis_main.c:273
(gdb) f 3
423 isisd/isis_lsp.c: No such file or directory.
(gdb) p node
$1 = (struct listnode *) 0x110
(gdb) f 8
316 lib/linklist.c: No such file or directory.
(gdb) p list->head->data
$2 = (void *) 0x5647f7cabf20
(gdb) p list->head->next->data
$3 = (void *) 0x5647f7c9bb60
(gdb) p list->head->next->next->data
Cannot access memory at address 0x120
(gdb) p list->head->next->next
$4 = (struct listnode *) 0x110
The backtrace provided above pertains to version 8.2.2, but it seems that the same issue exists in the code of the master branch as well.
isis_reset_attach_bit() is useless because lsp_handle_adj_state_change() unconditionally calls lsp_regenerate_schedule.
Andrew Cooks [Tue, 28 May 2024 04:07:14 +0000 (14:07 +1000)]
ospf6d: replace OSPF6_LSA_SIZE with ospf6_lsa_size
Dropping the macro enables better compiler type checking.
The macro was not used consistently when reading the lsa size from the
header, so this change also aims to use the replacement inline function
consistently.
Keeping the inline function has (marginal) utility in that it ensures that
the endian conversion is consistently performed.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
Donatas Abraitis [Sun, 26 May 2024 15:49:22 +0000 (18:49 +0300)]
bgpd: Make sure we have enough data to handle extended link bandwidth
Extended link bandwidth is encoded inside extended community as a ipv6-address
specific extended community, but with a malformed packet we should do the
sanity check here to have enough data. Especially before doing ptr_get_be64().
bgpd: Return success if lcomm/comm/extcomm name or entry is not found
Problem:
Currently bgp prints `Can't find community-list` and returns CMD_WARNING_CONFIG_FAILED
error if name or an entry for community, large-community and ext-community is not found. This
causes frr-reload to fail.
Fix:
Return success if community, large-community and ext-community name or
an entry is not found.
Before fix:
```
root@tor-4:mgmt:/var/home/cumulus# cat /etc/frr/frr.conf
<SNIP>
bgp large-community-list standard lc22 seq 10 permit 4200857911:011:01 4200857911:011:011555
no bgp large-community-list standard lc22 seq 10 permit 4200857911:011:01
<SNIP>
root@tor-4:mgmt:/var/home/cumulus# systemctl reload frr
Job for frr.service failed.
See "systemctl status frr.service" and "journalctl -xeu frr.service" for details.
Syslog:
<SNIP>
2024-05-21T21:02:51.525965+00:00 tor-4 frrinit.sh[2349145]: % Can't find community-list
2024-05-21T21:02:51.526487+00:00 tor-4 staticd[6167]: [VTVCM-Y2NW3] Configuration Read in Took: 00:00:00
2024-05-21T21:02:51.526595+00:00 tor-4 frrinit.sh[2349155]: [2349155|staticd] done
2024-05-21T21:02:51.526826+00:00 tor-4 frrinit.sh[2349145]: line 176: Failure to communicate[13] to bgpd, line: no bgp large-community-list standard lc22 seq 10 permit 4200857911:011:01
2024-05-21T21:02:51.527928+00:00 tor-4 frrinit.sh[2349153]: [2349153|watchfrr] done
2024-05-21T21:02:51.528382+00:00 tor-4 frrinit.sh[2349145]: [2349145|bgpd] Configuration file[/etc/frr/frr.conf] processing failure: 13
<SNIP>
```
After fix:
```
root@tor-4:mgmt:/var/home/cumulus# cat /etc/frr/frr.conf
<SNIP>
bgp large-community-list standard lc22 seq 10 permit 4200857911:011:01 4200857911:011:011555
no bgp large-community-list standard lc22 seq 10 permit 4200857911:011:01
<SNIP>
Donatas Abraitis [Fri, 24 May 2024 06:58:30 +0000 (09:58 +0300)]
bgpd: Check if FQDN capability length is in valid ranges
If FQDN capability comes as dynamic capability we should check if the encoding
is proper.
Before this patch we returned an error if the hostname/domainname length check
was > end. But technically, if the length is also == end, this is
a malformed capability, because we use the data incorrectly after we check the
length.
This causes heap overflow (when compiled with address-sanitizer).
During fuzzing, Iggy Frankovic discovered that get_edge() function in ospf_te.c
could return null pointer, in particular when the link_id or advertised router
IP addresses are fuzzed. As the null pointer returned by get_edge() function is
not handlei by calling functions, this could cause ospfd crash.
This patch introduces new verification of returned pointer by get_edge()
function and stop the processing in case of null pointer. In addition, link ID
and advertiser router ID are validated before calling ls_find_edge_by_key() to
avoid the creation of a new edge with an invalid key.
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ext_link() function when
attemping to read Segment Routing Adjacency SID subTLVs. The original code
doesn't check if the size of the Extended Link TLVs and subTLVs have the correct
length. In presence of erronous LSA, this will cause a buffer overflow and ospfd
crashes.
This patch introduces new verification of the subTLVs size for Extended Link
TLVs and subTLVs. Similar check has been also introduced for the Extended
Prefix TLV.
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ri() function when attemping to
read Segment Routing subTLVs. The original code doesn't check if the size of
the SR subTLVs have the correct length. In presence of erronous LSA, this will
cause a buffer overflow and ospfd crash.
This patch introduces new verification of the subTLVs size for Router
Information TLV.
zebra: Deny the routes if ip protocol CLI refers to an undefined rmap
Currently zebra does not deny the routes if `ip protocol <proto> route-map
FOO`
commmand is configured with reference to an undefined route-map (FOO in
this case).
However, on FRR restart, in zebra_route_map_check() routes get denied
if route-map name is available but the route-map is not defined. This
change was introduced in fd303a4ba14c762550db972317e1e88528768005.
Fix:
When `ip protocol <proto> route-map FOO` CLI is configured with reference to an
undefined route-map FOO, let the processing in ip_protocol_rm_add() and
ip_protocol_rm_del() go through so that zebra can deny the routes instead
of simply returning. This will result in consistent behavior.
Testing Done:
Before fix:
```
spine-1# configure
spine-1(config)# ip protocol bgp route-map rmap7
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 02:27:45
B>* 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1, weight 1, 02:27:35
B>* 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2, weight 1, 02:27:40
B>* 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3, weight 1, 02:27:40
B>* 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4, weight 1, 02:27:40
```
After fix:
```
spine-1(config)# ip protocol bgp route-map route-map67
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 00:35:03
B 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1 inactive, weight 1, 00:34:58
B 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2 inactive, weight 1, 00:34:57
B 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3 inactive, weight 1, 00:34:57
B 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4 inactive, weight 1, 00:34:58
spine-1(config)#
root@spine-1:mgmt:/var/home/cumulus# ip route show
root@spine-1:mgmt:/var/home/cumulus#
```
Louis Scalbert [Thu, 16 May 2024 14:44:03 +0000 (16:44 +0200)]
isisd: fix heap-after-free with prefix sid
> ==2334217==ERROR: AddressSanitizer: heap-use-after-free on address 0x61000001d0a0 at pc 0x563828c8de6f bp 0x7fffbdaee560 sp 0x7fffbdaee558
> READ of size 1 at 0x61000001d0a0 thread T0
> #0 0x563828c8de6e in prefix_sid_cmp isisd/isis_spf.c:187
> #1 0x7f84b8204f71 in hash_get lib/hash.c:142
> #2 0x7f84b82055ec in hash_lookup lib/hash.c:184
> #3 0x563828c8e185 in isis_spf_prefix_sid_lookup isisd/isis_spf.c:209
> #4 0x563828c90642 in isis_spf_add2tent isisd/isis_spf.c:598
> #5 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #6 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #7 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #8 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #9 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #10 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #11 0x7f84b835c72d in event_call lib/event.c:2011
> #12 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #13 0x563828c21918 in main isisd/isis_main.c:346
> #14 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
> #15 0x563828c20df9 in _start (/usr/lib/frr/isisd+0xf5df9)
>
> 0x61000001d0a0 is located 96 bytes inside of 184-byte region [0x61000001d040,0x61000001d0f8)
> freed by thread T0 here:
> #0 0x7f84b88a9b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123
> #1 0x7f84b8263bae in qfree lib/memory.c:130
> #2 0x563828c8e433 in isis_vertex_del isisd/isis_spf.c:249
> #3 0x563828c91c95 in process_N isisd/isis_spf.c:811
> #4 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #5 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #6 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #7 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #8 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #9 0x7f84b835c72d in event_call lib/event.c:2011
> #10 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #11 0x563828c21918 in main isisd/isis_main.c:346
> #12 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> previously allocated by thread T0 here:
> #0 0x7f84b88aa037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
> #1 0x7f84b8263a6c in qcalloc lib/memory.c:105
> #2 0x563828c8e262 in isis_vertex_new isisd/isis_spf.c:225
> #3 0x563828c904db in isis_spf_add2tent isisd/isis_spf.c:588
> #4 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #5 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #6 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #7 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #8 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #9 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #10 0x7f84b835c72d in event_call lib/event.c:2011
> #11 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #12 0x563828c21918 in main isisd/isis_main.c:346
> #13 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> SUMMARY: AddressSanitizer: heap-use-after-free isisd/isis_spf.c:187 in prefix_sid_cmp
> Shadow bytes around the buggy address:
> 0x0c207fffb9c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffb9e0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba00: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
> =>0x0c207fffba10: fd fd fd fd[fd]fd fd fd fd fd fd fd fd fd fd fa
> 0x0c207fffba20: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba40: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
> Shadow byte legend (one shadow byte represents 8 application bytes):
> Addressable: 00
> Partially addressable: 01 02 03 04 05 06 07
> Heap left redzone: fa
> Freed heap region: fd
> Stack left redzone: f1
> Stack mid redzone: f2
> Stack right redzone: f3
> Stack after return: f5
> Stack use after scope: f8
> Global redzone: f9
> Global init order: f6
> Poisoned by user: f7
> Container overflow: fc
> Array cookie: ac
> Intra object redzone: bb
> ASan internal: fe
> Left alloca redzone: ca
> Right alloca redzone: cb
> Shadow gap: cc
> ==2334217==ABORTING
Fixes: 2f7cc7bcd3 ("isisd: detect Prefix-SID collisions and handle them appropriately") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
zebra: Deny the routes if ip protocol CLI refers to an undefined rmap
Currently zebra does not deny the routes if `ip protocol <proto> route-map
FOO`
commmand is configured with reference to an undefined route-map (FOO in
this case).
However, on FRR restart, in zebra_route_map_check() routes get denied
if route-map name is available but the route-map is not defined. This
change was introduced in fd303a4ba14c762550db972317e1e88528768005.
Fix:
When `ip protocol <proto> route-map FOO` CLI is configured with reference to an
undefined route-map FOO, let the processing in ip_protocol_rm_add() and
ip_protocol_rm_del() go through so that zebra can deny the routes instead
of simply returning. This will result in consistent behavior.
Testing Done:
Before fix:
```
spine-1# configure
spine-1(config)# ip protocol bgp route-map rmap7
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 02:27:45
B>* 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1, weight 1, 02:27:35
B>* 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2, weight 1, 02:27:40
B>* 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3, weight 1, 02:27:40
B>* 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4, weight 1, 02:27:40
```
After fix:
```
spine-1(config)# ip protocol bgp route-map route-map67
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 00:35:03
B 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1 inactive, weight 1, 00:34:58
B 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2 inactive, weight 1, 00:34:57
B 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3 inactive, weight 1, 00:34:57
B 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4 inactive, weight 1, 00:34:58
spine-1(config)#
root@spine-1:mgmt:/var/home/cumulus# ip route show
root@spine-1:mgmt:/var/home/cumulus#
```
Louis Scalbert [Fri, 17 May 2024 15:57:46 +0000 (17:57 +0200)]
bgpd, tests: fix route leaking from the default l3vrf
Leaked route from the l3VRF are installed with the loopback as the
nexthop interface instead of the real interface.
> B>* 10.0.0.0/30 [20/0] is directly connected, lo (vrf default), weight 1, 00:21:01
Routing of packet from a L3VRF to the default L3VRF destined to a leak
prefix fails because of the default routing rules on Linux.
> 0: from all lookup local
> 1000: from all lookup [l3mdev-table]
> 32766: from all lookup main
> 32767: from all lookup default
When the packet is received in the loopback interface, the local rules
are checked without match, then the l3mdev-table says to route to the
loopback. A routing loop occurs (TTL is decreasing).
> 12:26:27.928748 ens37 In IP (tos 0x0, ttl 64, id 26402, offset 0, flags [DF], proto ICMP (1), length 84)
> 10.0.0.2 > 10.0.1.2: ICMP echo request, id 47463, seq 1, length 64
> 12:26:27.928784 red Out IP (tos 0x0, ttl 63, id 26402, offset 0, flags [DF], proto ICMP (1), length 84)
> 10.0.0.2 > 10.0.1.2: ICMP echo request, id 47463, seq 1, length 64
> 12:26:27.928797 ens38 Out IP (tos 0x0, ttl 63, id 26402, offset 0, flags [DF], proto ICMP (1), length 84)
> 10.0.0.2 > 10.0.1.2: ICMP echo request, id 47463, seq 1, length 64
Do not set the lo interface as a nexthop interface. Keep the real
interface where possible.
Fixes: db7cf73a33 ("bgpd: fix interface on leaks from redistribute connected") Fixes: 067fbab4e4 ("bgpd: fix interface on leaks from network statement") Fixes: 8a02d9fe1e ("bgpd: Set nh ifindex to VRF's interface, not the real") Fixes: https://github.com/FRRouting/frr/issues/15909 Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
zhou-run [Sat, 18 May 2024 03:13:35 +0000 (11:13 +0800)]
isisd: fix crash when configuring the circuit type for the interface.
1. When both Router A and Router B are configured with "is-type level-1," the area->is_type will be assigned the value IS_LEVEL_1, and circuit->is_type will also be assigned the value IS_LEVEL_1.
2. Configuring the circuit type "isis circuit-type level-1-2" for the interface of Router A will inadvertently call lib_interface_isis_circuit_type_modify to assign circuit->is_type the value IS_LEVEL_1_AND_2. This causes the hello packets reception and transmission, as well as the reception of LSP/SNP packets, to check circuit->is_type, allowing the level-2 hello packets to be sent and received normally, and level-2 LSP/SNP packets to be received normally.
3. When Router B modifies the configuration to "is-type level-2," and Router A and Router B establish a level-2 neighbor relationship, Router B sends level-2 LSP packets to Router A. Upon receiving these, Router A calls isis_spf_schedule to calculate the level-2 SPT, which results in accessing a null pointer.
When defining the behavior of the ISIS router, the call to isis_area_is_type_set will check that area->is_type is not IS_LEVEL_1_AND_2, and it disallows circuit->is_type_config from overriding circuit->is_type. Therefore, when configuring the circuit type for the interface of Router A, it should also check that area->is_type is not IS_LEVEL_1_AND_2 and disallow circuit->is_type_config from overriding circuit->is_type.
Rajasekar Raja [Fri, 17 May 2024 22:43:59 +0000 (15:43 -0700)]
bgpd: backpressure - Fix to avoid CPU hog
In case when bgp_evpn_free or bgp_delete is called and the announce_list
has few items where vpn/bgp does not match, we add the item back to the
list. Because of this the list count is always > 0 thereby hogging CPU or
infinite loop.
Rajasekar Raja [Fri, 17 May 2024 19:36:31 +0000 (12:36 -0700)]
bgpd: backpressure - Fix to withdraw evpn type-5 routes immediately
As part of backpressure changes, there is a bug where immediate withdraw
is to be sent for evpn imported type-5 prefix to clear the nh neigh and
RMAC entry.
Fixing this by sending withdraw immediately to keep it inline with the
code today
anlan_cs [Thu, 16 May 2024 08:44:45 +0000 (16:44 +0800)]
zebra: fix mpls command
Configured with "mpls label bind 1.1.1.1/32 explicit-null", the running
configuration is:
```
!
mpls label bind 1.1.1.1/32 IPv4 Explicit Null
!
```
After this commit, the running configuration is:
```
!
mpls label bind 1.1.1.1/32 explicit-null
!
```
And add the support for the "no" form:
```
anlan(config)# mpls label bind 1.1.1.1/32 explicit-null
anlan(config)# no mpls label bind 1.1.1.1/32 explicit-null
```
EasyNetDev [Mon, 13 May 2024 14:30:45 +0000 (17:30 +0300)]
zebra: Update Zebra for DPDK >=22.11 API
* Starting from version DPDK 22.11 we have API changes:
The rte_driver and rte_device objects are now opaque and must be manipulated through added accessors.
We need to update Zebra DPDK sources to DPDK version >=22.11
Christian Hopps [Wed, 15 May 2024 03:36:38 +0000 (23:36 -0400)]
tests: improve the grpc query client and topotest
- Add separate get, get-config, get-state operations to query command, as
well as switching default output to JSON.
- Add an `--xml` to change the output format.
- move printss to logging.debug so output is a machine parseable result.
Mark Stapp [Tue, 14 May 2024 14:28:17 +0000 (10:28 -0400)]
zebra: include route source set by route-map in show output
Include the prefix source address when set by a route-map in
show output for routes, in various formats.
Add some debugs when encoding netlink route messages with
a source address.
Philippe Guibert [Tue, 14 May 2024 09:51:50 +0000 (11:51 +0200)]
bgpd: fix colored routes not installed after a switchover
On a multihomed setup with colored bgp updates, when the primary
PE goes offline, only a small subset of colored bgp routes are
not switching to the secondary pe.
When a switchover happens, due to a remote IP becoming unreachable,
some nexthop tracking down notifications are sent, but those messages
are completely ignored for colored bgp updates.
The original code has been thought for mounting up the SR-TE service,
when IP reachability is ok, but not when services goes offline.
Fix this by extending the down notification mechanism for colored routes
too.
Fixes: 545aeef1d13e ("bgpd: extend the NHT code to understand SR-TE colors") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Similarly to recently fixed 'show ip[v6] prefix-list ...' - PR#15750,
json output is not valid for 'show ip[v6] access-list ... json' commands,
as it goes through all the running daemons and for each one it calls
'filter_show' creating a new json object. To aggreagate the output
and create a valid json that can later be parsed, the commands were
moved to vtysh and formatted accordingly
Philippe Guibert [Mon, 13 May 2024 15:42:30 +0000 (17:42 +0200)]
bgpd: fix colored nexthops resolution
When the SR-TE service is off, colored BGP routes are not
selected if it is recursively resolved over routes that are
colored only.
Actually, a BGP nexthop context includes the color attribute;
when an update from ZEBRA is received, there is no color, and
the colored BGP nexthop contexts are parsed, only if there
is a non colored BGP nexthop context. The actual setup shows
this may not be the case every time.
Fix this by parsing all the colored BGP nexthop contexts.
Fixes: b8210849b8ac ("bgpd: Make bgp ready to remove distinction between 2 nh tracking types") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Donald Sharp [Thu, 9 May 2024 11:47:29 +0000 (07:47 -0400)]
*: Modify agentx to be allowed to be called
If you had a situation where an operator turned on
ospfd with snmp but not ospf6d and agentx was configured
then you get into a situation where ospf6d would complain
that the config for agentx did not exist. Let's modify
the code to allow this situation to happen.
Fixes: #15896 Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Donald Sharp [Wed, 8 May 2024 16:52:12 +0000 (12:52 -0400)]
zebra: Ensure multipath encodes vxlan right for fpm usage
The fpm code path for the dplane_fpm_nl module was improperly
encoding the multipath nexthop data for vxlan type routes.
Move this into the embedded nexthop encoding where it belongs.
This change makes it so that the usage of `-M dplane_fpm_nl`
is now producing the same netlink messages that `-M fpm`
produces when using vxlan based nexthops.
projects / matthieu / frr.git / log