Rafael Zalamena [Tue, 8 Jan 2019 10:14:28 +0000 (08:14 -0200)]
zebra: implement FreeBSD route attr handling
When porting routing socket macro data handling to functions, the
attribute function was forgotten. The only difference between the
attribute and address handler is the family type check.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Donald Sharp [Sat, 22 Dec 2018 00:16:52 +0000 (19:16 -0500)]
bgpd: Modify End of Rib notification to INFO
The End of Rib notification in BGP is useful to know no matter
the circumstances. So change this from a debug message to
an info and cleanup the message a bit and add vrf we are in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
`isis network point-to-point` was being rejected from the configuration
file as it was being processed before the reception of the UP zebra
notification for the interface. This meant that the `circ_type` was set
at CIRCUIT_T_UNKNOWN, which led the northbound callback to fail. This
check was removed as it was not really necessary; when the zebra
notification is received, the correct circuit type will be enforced,
but now the point-to-point config will be saved and correctly applied
when zebra recognizes the interface as a broadcast one.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Chirag Shah [Mon, 17 Dec 2018 22:36:27 +0000 (14:36 -0800)]
zebra: evpn dup addr detect fix unfreeze action
Below are cases where EVPN duplicate detection
Freeze and Unfreeze required fixes:
Auto recovery needs to check neighbor's duplicate flag
to take action, as neigh could be marked duplicate
via inherited from MAC where IP detection count could be 0.
MAC duplicate detection needs to set flag to true
if freeze action is configured.
Local MAC add update should not send update to bgp
if MAC is in frozen state.
Remote MAC-IP update should not process neigh update if MAC
is detected as duplicate during remote update.
Ticket:CM-23344
Testing Done:
Trigger duplicate detection via both local and remote update trigger,
Validate clear command and other changes expected behavior.
Auto-recovery takes appropriate action on inherited IPs.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Donald Sharp [Fri, 21 Dec 2018 14:23:36 +0000 (09:23 -0500)]
pimd: Remove pimg
The pimg data structure is only used in one spot to send the default
vrf id to zebra upon startup. Add the default vrf id to the struct pim_router
data structure and remove the pimg pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Renato Westphal [Wed, 2 Jan 2019 18:47:51 +0000 (16:47 -0200)]
zebra: silence harmless ioctl warning when retrieving interface speed
zebra uses the SIOCETHTOOL ioctl with the ETHTOOL_GSET command to
fetch the speed of interfaces from the kernel. The only problem is
that ETHTOOL_GSET returns EOPNOTSUPP when the given interface is a
virtual interface. This leads to zebra emitting warnings like this
at startup:
ZEBRA: IOCTL failure to read interface lo speed: 95 Operation not supported
ZEBRA: IOCTL failure to read interface dummy0 speed: 95 Operation not supported
ZEBRA: IOCTL failure to read interface ovs-system speed: 95 Operation not supported
Silence these warnings by ignoring EOPNOTSUPP errors, since we know
they are harmless. This is similar to how we handle EINVAL errors
from the BSD SIOCGIFMEDIA ioctl (commit c69f2c1ff).
Renato Westphal [Wed, 2 Jan 2019 15:05:53 +0000 (13:05 -0200)]
zebra, lib: fix the ZEBRA_INTERFACE_VRF_UPDATE zapi message
Unlike the other interface zapi messages, ZEBRA_INTERFACE_VRF_UPDATE
identifies interfaces using ifindexes and not interface names. This
is a problem because zebra always sends ZEBRA_INTERFACE_DOWN
and ZEBRA_INTERFACE_DELETE messages before sending
ZEBRA_INTERFACE_VRF_UPDATE, and the ZEBRA_INTERFACE_DELETE callback
from all daemons set the interface index to IFINDEX_INTERNAL. Hence,
when decoding a ZEBRA_INTERFACE_VRF_UPDATE message, the interface
lookup would always fail since the corresponding interface lost
its ifindex. Example (ospfd):
OSPF: Zebra: Interface[rt1-eth2] state change to down.
OSPF: Zebra: interface delete rt1-eth2 vrf default[0] index 8 flags 11143 metric 0 mtu 1500
OSPF: [EC 100663301] INTERFACE_VRF_UPDATE: Cannot find IF 8 in VRF 0
To fix this problem, use interface names instead of ifindexes to
indentify interfaces like the other interface zapi messages do.
Donald Sharp [Mon, 31 Dec 2018 22:49:47 +0000 (17:49 -0500)]
sharpd: Allow sharpd to accept nexthop group as part of route install
When installing routes via sharpd 'sharp install route... ' command
add the ability to specify a nexthop-group to use. This will
allow sharpd to create ECMP routes into zebra.
donna.cumulusnetworks.com# sharp install routes 10.0.50.0 nexthop-group JANELLE 10
donna.cumulusnetworks.com# end
donna.cumulusnetworks.com# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
K>* 0.0.0.0/0 [0/106] via 10.0.2.2, enp0s3, 00:20:38
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:20:38
D>* 10.0.50.0/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.1/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.2/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.3/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.4/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.5/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.6/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.7/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.8/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.9/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:20:38
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:20:38
donna.cumulusnetworks.com#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Renato Westphal [Mon, 31 Dec 2018 13:11:15 +0000 (11:11 -0200)]
ospfd: convert a couple of "show" commands to DEFPY
DEFPY commands are easier to maintain and less susceptible to
bugs. In the long term we should try to merge the plethora of
"show ip ospf neighbor" commands (total of 14) into a single DEFPY.
Donald Sharp [Mon, 31 Dec 2018 00:59:52 +0000 (19:59 -0500)]
eigrpd: Allow eigrp to set/unset the router-id as a value.
This code addition allows eigrp to set/unset the router-id
value. At this point I am not 100% sure that we do all the necessary
rework when a router-id changes. But on startup if read in before
a network statement we should be ok.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Mon, 31 Dec 2018 00:54:25 +0000 (19:54 -0500)]
eigrpd: eigrp usage of uint32_t to struct in_addr for router_id data
In eigrp we were using a uint32_t to hold the `struct in_addr` data
for the router id values. This caused us to do unnecessary conversions
pre and post for in/out. Let's just use the standard `struct in_addr`
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
lib, rip, ripng, babel, eigrp: add ctx pointer to distribute api
a distribute_ctx context pointer is returned after initialisation to the
calling daemon. this context pointer will be further used to do
discussion with distribute service. Today, there is no specific problem
with old api, since the pointer is the same in all the memory process.
but the pointer will be different if we have multiple instances. Right
now, this is not the case, but if that happens, that work will be used
for that.
distribute-list initialisation is split in two. the vty initialisation
is done at global level, while the context initialisation is done for
each routing daemon instance.
babel daemon is being equipped with a routing returning the main babel
instance.
also, a delete routine is available when the daemon routing instance is
suppressed.
a list of contexts is used inside distribute_list. This will permit
distribute_list utility to handle in the same daemon to handle more than
one context. This will be very useful in the vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Anton Degtyarev [Wed, 14 Nov 2018 03:14:04 +0000 (06:14 +0300)]
bgpd, zebra: auto assign labels from label pool to regular prefixes in BGP labeled unicast
This commit is the last missing piece to complete BGP LU support in bgpd. To this moment, bgpd (and zebra) supported auto label assignment only for prefixes leaked from VRFs to vpn and for MPLS SR prefixes. This adds auto label assignment to other routes types in bgpd. The following enhancements have been made:
* bgp_route.c:bgp_process_main_one() now sets implicit-null local_label to all local, aggregate and redistributed routes.
* bgp_route.c:bgp_process_main_one() now will request a label from the label pool for any prefix that loses the label for some reason (for example, when the static label assignment config is removed)
* bgp_label.c:bgp_reg_dereg_for_label() now requests labels from label pool for routes which have no associated label index
* zebra_mpls.c:zebra_mpls_fec_register() now expects both label and label_index from the calling function, one of which must be set to MPLS_INVALID_LABEL or MPLS_INVALID_LABEL_INDEX, based on this it will decide how to register the provided FEC.
Signed-off-by: Anton Degtyarev <anton@cumulusnetworks.com>
Mark Stapp [Wed, 19 Dec 2018 16:51:41 +0000 (11:51 -0500)]
zebra: reduce rib workqueue retry timeout
Reduce the zebra rib workqueue retry timeout, used when the queue
towards the zebra dataplane has reached its limit. Lowering the
value was reported to improve update throughput on some platforms.
Donald Sharp [Wed, 19 Dec 2018 12:30:01 +0000 (07:30 -0500)]
bgpd: Allow shortened 'no set large-community' and 'no set large-comm-list'
These two commands previously required the whole original command but
we should allow the user to shorten out this since the data at the
end is not required to figure out what to delete.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Mon, 17 Dec 2018 02:36:49 +0000 (21:36 -0500)]
zebra: Allow ns delete to happen after under/over flow checks
Allow the ns deletion event to happen *after* the data validity
checks.
Please note this probably still leaves a weird hole if we receive
multiple namespace events ( as the for loop implies ). We will
stop handling anything after a namespace deletion notification.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
isisd, yang: set default network-type to broadcast
isisd has both a circ_type and a circ_type_config variable to track
the network tpye of an interface. The former has no default, but the
latter defaults to broadcast. Adding that default makes sure that the
yang leaf won't be deleted, which is something that would not make
sense from an isisd perspective. We will need to add an operational
state leaf to match the potential difference between the configured
network type and the actual network type, since the latter might be
different based on the interface flags received from zebra.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
if we are using the transactional CLI, we might be trying to
delete an area that has not been actually created in isisd.
So rather than relying on isis_area_lookup, check the candidate
config for the presence of the corresponding area instance.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
isisd: retrieve default values from the yang model
also fix a minor issue with isis_config_write where we were
not incrementing the write variable, which is used to append
a new line at the end of the vty string
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
As requested by the reviewers. Additionally, added a check when
setting a circuit on an interface to see if it is a loopback,
and in that case, set it to passive.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
projects / matthieu / frr.git / log