Stephen Worley [Thu, 26 Mar 2020 14:39:16 +0000 (10:39 -0400)]
zebra: remove unnecessary `cmd =` check
In the netlink code for determining whether to set
a src on the route, we check if the cmd=NEW_ROUTE
but its not possible for this to ever be anything
but a new route since we do a goto skip further up
if its a DEL_ROUTE cmd.
So remove this unnecessary check.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Donatas Abraitis [Thu, 26 Mar 2020 14:06:34 +0000 (16:06 +0200)]
bgpd: Show that prefix is malformed if aggregated by 0
Show if this malformed under `show [ip] bgp <prefix>`:
```
eva# sh ip bgp 103.79.124.0/22
BGP routing table entry for 103.79.124.0/22
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
192.168.201.136
64539 15096 6939 7545 7545 136001, (aggregated by 0(malformed) 0.0.0.0)
192.168.201.136 from 192.168.201.136 (192.168.201.136)
Origin IGP, valid, external, best (First path received)
Last update: Thu Mar 26 10:02:07 2020
```
once again, for both hello-multiplier and hello-interval
the order in which the number and level were shown in the
cli_show methods was inverted compared to the vtysh command,
which created issues with frr-reload.py.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
David Lamparter [Tue, 24 Mar 2020 18:15:04 +0000 (19:15 +0100)]
*: remove line breaks from log messages
Line break at the end of the message is implicit for zlog_* and flog_*,
don't put it in the string. Mid-message line breaks are currently
unsupported. (LF is "end of message" in syslog.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Tue, 10 Dec 2019 16:23:25 +0000 (17:23 +0100)]
sharpd: add "logpump" to bulk test logging
This just generates log messages in bulk for testing logging backend
performance. It's in sharpd so the full "context" of being in a daemon
is available (e.g. different logging configs, parallel load in the main
thread.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Don Slice [Mon, 9 Mar 2020 18:34:53 +0000 (18:34 +0000)]
bgpd: clean up import vrf route-map command
Problem seen that if "import vrf route-map RMAP" was entered
without any vrfs being imported, the configuration was displayed
as "route-map vpn import RMAP". Additionally, if "import vrf
route-map" was entered without specifying a route-map name,
the command was accepted and the word "route-map" would be
treated as a vrf name. This fix resolves both of those issues
and also allows deleting the "import vrf route-map" line without
providing the route-map name.
Ticket: CM-28821 Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Donald Sharp [Sun, 22 Mar 2020 03:37:24 +0000 (23:37 -0400)]
bgpd, lib, ripngd: Add agg_node_get_prefix
Modify code to use lookup function agg_node_get_prefix()
as the abstraction layer. When we rework bgp_node to
bgp_dest this will allow us to greatly limit the amount
of work needed to do that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Sat, 21 Mar 2020 21:36:48 +0000 (17:36 -0400)]
bgpd: Make bgp_debug_bestpath take a `struct bgp_node`
Defer the grabbing of the prefix for as long as is possible.
This is a long term rework of how we access the `struct bgp_node`
to only use accessor functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
saravanank [Tue, 24 Mar 2020 02:57:17 +0000 (19:57 -0700)]
pimd: Reg Suppression expiry has to account for couldreg->false while in prune
Problem: This happened in once in a while during testing the scenario multiple
times. When regstop timer expire and at that point if rpf interface doesn't
exist, the register state for the upstream gets struck in reg-prune state indefinitely.
This will not recover even when rpf comes back and traffic resumed because
register state is struck on prune.
RCA: Reg suppression expiry is keeping reg state unchanged when iif is absent.
Fix: When iif is absent during reg suppression expiry, treat it as couldreg
becoming false and move it NO_INFO state.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Karen Schoener [Fri, 6 Mar 2020 15:33:40 +0000 (10:33 -0500)]
zebra: Synchronous client queues accumulate messages from zebra.
Zebra is currently sending messages on interface add/delete/update,
VRF add/delete, and interface address change - regardless of whether
its clients had requested them. This is problematic for lde and isis,
which only listens to label chunk messages, and only when it is
waiting for one (synchronous client). The effect is the that messages
accumulate on the lde synchronous message queue.
With this change:
- Zebra does not send unsolicited messages to synchronous clients.
- Synchronous clients send a ZEBRA_HELLO to zebra.
The ZEBRA_HELLO contains a new boolean field: sychronous.
- LDP and PIM have been updated to send a ZEBRA_HELLO for their
synchronous clients.
saravanank [Mon, 23 Mar 2020 02:40:05 +0000 (19:40 -0700)]
pimd: bsr election elects wrong bsr
RCA: preferred bsr routine, compare address in network byte order
Fix: changed to host format before comparision.
Testing:
Verified between 1.1.2.7 and 10.2.1.1, 10.2.1.1 is chosen as bsr
Initially:
R11# sh ip pim bsr
PIMv2 Bootstrap information
Current preferred BSR address: 1.1.2.7
Priority Fragment-Tag State UpTime
0 2862 ACCEPT_PREFERRED 00:00:30
Last BSM seen: 00:00:30
After next bsr started:
R11# sh ip pim bsr
PIMv2 Bootstrap information
Current preferred BSR address: 10.2.1.1
Priority Fragment-Tag State UpTime
0 3578 ACCEPT_PREFERRED 00:00:01
Last BSM seen: 00:00:01
R11# sh ip pim bsr
PIMv2 Bootstrap information
Current preferred BSR address: 10.2.1.1
Priority Fragment-Tag State UpTime
0 3578 ACCEPT_PREFERRED 00:00:04
Last BSM seen: 00:00:04
Signed-off-by: Saravanan K <saravanank@vmware.com>
Donald Sharp [Sun, 22 Mar 2020 18:50:46 +0000 (14:50 -0400)]
bgpd: More `const struct prefix` work
Modify more code to use `const struct prefix` throughout
bgp. This is all prep work for adding an accessor function
for bgp_node to get the prefix and reduce all the places that
code needs to be touched when we get that work done.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Sat, 21 Mar 2020 12:22:51 +0000 (08:22 -0400)]
isisd: Expand send/receive buffers to allow for larger mtu
User is reporting:
2020/03/21 03:12:36 ISIS: isis_send_pdu_bcast: sock_buff size 8192 is less than output pdu size 9014 on circuit em0
2020/03/21 03:12:36 ISIS: [EC 67108865] ISIS-Adj (1): Send L2 IIH on em0 failed
MTU's can frequently hit 9k in size, we have buffer limits
that prevent this from being fully used and creating errors.
Modify the code to allow for up to 16k mtu
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Martin Winter [Fri, 20 Mar 2020 22:50:29 +0000 (23:50 +0100)]
tests: Make topotest working on different locale
"sort" as used in all-protocol-startup used sort which causes
different sort order based on locale settings. Specify the
correct one to make output matching our expected result
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Donald Sharp [Wed, 18 Mar 2020 14:31:34 +0000 (10:31 -0400)]
zebra: Modify some route install debugs to allow us to understand a bit better
1) When programming a nhg id to the kernel we had no debug of that
is what we are doing.
2) Add debugs to all nexthop information to allow us to follow
which prefix we are talking about. This is especially
useful when dealing with a large number of routes and
you want to grep out one or two too see what is going on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Donald Sharp [Fri, 20 Mar 2020 00:19:50 +0000 (20:19 -0400)]
bgpd: Convert #define of bgp fsm events to an enum
In PR #6052 which fixes issue #5963 the bgp fsm events
were confused with the bgp fsm status leading
to a bug. Let's start separating those out
so these types of failures cannot just
easily occur.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
lynne [Thu, 20 Feb 2020 21:46:47 +0000 (16:46 -0500)]
tests: Fixing test for LDP
LDP now advertises routes it learns over an interface not configured
with LDP. If the route, which is learned over a non-LDP configured
interface, has no other NHs learned over an interface running LDP,
the router will act as a LDP egress router.
Modifying ldp-topo1/r1/ip_mpls_route.ref to include an extra newline.
Without this newline, the ldp-topo1 was failing.
Karen Schoener [Thu, 20 Feb 2020 19:27:49 +0000 (14:27 -0500)]
ldpd: adding support for LDP ordered label distribution control
LDP ordered label distribution control only binds a label to
a FEC if it is the egress LSR, or the router received a label
binding for a FEC from the next hop router. In this mode,
an MPLS router will create a label binding for each FEC and
distribute it to its neighbors so long as he has a entry in
the RIB for the destination.
the vtysh command to set the isis metric on an interface
is 'isis metric level-1 X', but when showing the running
config we were displaying it as 'isis metric X level-1'.
This would confuse frr-reload.py when attempting to apply
a config file populated with the correct command; on the
other hand, using the show command format would return an
error when running vtysh -C on the file.
Fix this by making the show command return the same format
as the vtysh setting command.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
projects / matthieu / frr.git / log