pimd: Add WRVIFWHOLE callback.

Naive implementation of the WRVIFWHOLE callback
from the kernel.

signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Don't pass in src_str and grp_str

Allow sub functions to call pim_str_sg_dump as
appropriate

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Allow RP to clear based upon KAT(S,G)

When the KAT(S,G) pops, allow the RP to clear the
mroute.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add the display of the Keep Alive Timer for upstream

Add the ability to see the Keep Alive timer for
upstream information.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix another SA issue

pim_zebra.c was checking to see if a ifp pointer was null
in some debug statements.  This caused the SA code
to assume that if we were at this point then the ifp
could be null and subsuquent code that doesn't check
for it to be wrong.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix some SA issues

SA found these two issues:
1) Check of ifp non-null caused other non-checks down code
to assume ifp could be null.  This is not the case.
If we get a callback at this point we must have a valid ifp pointer.

2) We were inadvertently calling igmp_source_reset_gmi with
a possible NULL source pointer.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Some SA analysis fixes.

This commit addresses some SA issues found:

1) double set variables
2) value set but never used.
3) wrong return path used.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Send hello immediately with receive of new genid

When we receive a new genid from a neighbor, we need
to form the neigbhor relationship before the join/prune
messages are sent to the neighbor.

Additionally we were calling the
pim_upstream_rpf_genid_changed function 2 times
in a row.  This function just spun throught the upstream
list and marked all relevant upstreams to be sent
immediately

Ticket:CM-11979
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: multiple rp commands

Allow the user to specify multiple rp commands.

'ip pim rp A.B.C.D'   -> translates to 'ip pim rp A.G.C.D 224.0.0.0/24'
ip pim rp A.B.C.D A.B.C.D/M
  First is the rp, second is the group with mask.

Groups and masks cannot be over each other except 224.0.0.0/24 which
is the fallback if used.

Ticket: CM-7860
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Refactor RP code and start the ability to handle ranges

Refactor the qpim_rp into pim_rp.c so that the global data
is protected.  This will allow us to easily add the group
ranges.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix some null register issues

The Null register bit was not properly being set and
the total length was wrong as well.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix join_desired for (*,G) states

When we are evaluating if we have a inherited_olist, include
the *,G state in determing what to do.

Additionally when we receive a join or prune of *,G
do the right thing.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Was removing the wrong channel.

When receiving a prune (*,G), we were removing
from the wrong channel.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Enable WrongVif and WRWHOLEVIF callbacks.

Turn on Wrong Vif and Whole packet wrong vif callbacks.

Signed-off-by: Donald Sharp <sharpd@cumuusnetworks.com>

pimd: Fix broken build

I missed 2 instances of the conversion from struct prefix
to struct prefix_sg

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

zebra: Remove unused variable.

Remove the rtnh variable since it is unused.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

lib, pimd: Fix borked up prefix code

Fix the struct prefix to be an actual struct prefix_sg.
This cleans up a bunch of code to make it look nicer.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add rs_timer display

For the 'show ip pim upstream' command addd the RSTimer to the display

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix upstream state machine.

RFC 4601 4.5.7:
Joined
      The downstream state machines and local membership information
      indicate that the router should join the shortest-path tree for
      this (S,G).

The code has a upstream state that is in 'J' state already
due to a S,G multicast packet received on an incoming
interface.  This packet has been forwarded to the RP.
The RP sees this and immediately sends a join towards
the S,G.

The code as originally written assumed that you could
not transition from a J state to a J state.  This is not
true.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Change packet debug to pim register specific debug

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add ability to debug pim Register packets

Allow the user to specify the ability to debug
pim register packets.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Remove Wrong PIMREG ifchannel state

The PIMREG ifchannel state is an evolutionary dead-end.
I should not have introduced this code.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Make the NOCACHE just set the regiface to the coil

When we receive a NOCACHE upcall, add the pimreg interface
to the oil so that we can receive the data.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Send join when a S,G is pruned

When a *,G is received, and we have S,G that is in a
non-joined state, Send the join to the S,G.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add upstream children finding

When we receive a *,g find all S,G that
are related and set pointer appropriately

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add Local Genid to 'show ip pim hello'

Display the local idea of what the Genid is

Ticket: CM-11980
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Allow the kernel to forward encap'ed packets for us

When we get a pim register allow the kernel to forward the
saved packets.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: igmpv3.c was causing prune/join messages to be sent

We were erroneously sending a prune *,G immediately followed
by a join *,G under certain situations

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: change from ifchannels to oil's

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: More macro fallout fix.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix pim_macro downstream_jpstate

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Create storage for a raw socket.

Each interface needs the ability to send raw packets
at the RP.  Create the data structure to do so.
Further commits will create the socket as necessary
and send the packet.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix DownstreamJPState(S,G,I) check.

Fix the
DownStreamJPState(S,G,I) and
DownStreamJPState(*,G,I) macros.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Allow ifchannel S,G's to know their *,G parent

Given a S,G ifchannel, create a parent pointer for any
*,G state for that interface.  When removing a *,G
remove S,G pointers.

We need to think about the case where their is a *,G
but no S,G for a interface when we are determing.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: pim_str_sg_dump can't be called 2 times in the same debug

When we call pim_str_sg_dump we cannot call the variable twice
for the same debug.  This fixes this issue in the 2 places it
was borked.

Ticket: CM-12045
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix *,g pruning

We were not properly handling the receipt of prune *,g messages.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Infrastructure to forward packet down (*,G) tree

When a register is received, forward the packet as appropriate.
This is the infrastructure to make this happen.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Create raw socket for register packets to be forwarded.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Create pim_socket_bind

Allow a socket to be bound to a specified
interface.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Revamp send of join/prune to actually set bits right.

When a *,G report is sent, the RPT and WC bits
are set as well as the source is the RP address
for the group.

If this routers idea of the RP for this group is
different than the idea of the RP from the sender
than that particular *,G can be dropped.

Ticket: CM-12031
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Start abstraction for WC and RPT bits

Start the abstraction of the WC and RPT bits
so we can send the data as appropriate.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fixup pim_oil interface to be a bit more consistent.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd:  Find the parent on newly created upstream's

When we create a new upstream data structure find the parent.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Make kernel upcalls PIM_DEBUG_MROUTE

The kernel upcalls for control messages should
be PIM_DEBUG_MROUTE instead of PIM_DEBUG_PIM_TRACE

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix Join/Prune logging

For some reason Join/Prune debugs were being
turned on by trace not by the 'debug pim packets join'
command.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add some 'show debug pim' output

Add some missing 'show debug pim' output so that I can
see what I think I'm debugging.

In general the pim debugs need another round of fixing.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Some bug fixes for the register receive code path

When we receive a register receive handle it a bit
better.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Allow (*,G) joins to join a (s,g) that pre-exists

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add code to handle the inheritance for (s,g)

Add code to handle the inheritance and to send the
join upstream as appropriate.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Remove unnecessary QuaggaId

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: start fix of inherited_olist

We were not correctly determing the inherited olist and
applying it to the s,g.

Start the work to do this.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Stop leaving pim_register_recv early

When we received a pim_register_recv we were shortcutting
the algorithm to determine what to do when we receive
a register pim message.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix _find and switch_to_spt_desired.

The pim_upstream_find function should not be finding a *,G
Find what is asked of it.

The switch_to_spt_desired should return true on the RP currently.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: pim_br switch to struct prefix

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: SwitchToSptDesired now uses struct prefix *sg.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: More conversion of struct prefix *sg

Some more conversion to use struct prefix *sg in pim_ifchannel.c

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Convert pim_ifchannel_local_membership_del to struct prefix *sg

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: convert pim_ifchannel_local_membership_add to use struct prefix sg

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Convert pim_ifchannel_prune to use struct prefix *sg

Convert the pim_ifchannel_prune function to use a struct
prefix *sg for the source group.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Convert pim_ifchannel_join_add to struct prefix *sg

Convert the pim_ifchannel_join_add to use a struct prefix *sg
instead of struct in_addr's.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: more source,group conversion to prefix sg

Convert more of the code to pass around a 'struct prefix sg'
instead of individual struct addr's.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Refactor s,g information to struct prefix in pim_upstream.h

This change allows us to pass the (s,g) state around as a prefix.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Convert ifchannel to using a prefix to store (s,g)

Convert ifchannel to use a prefix to store (s,g) information.
Additionally create pim_str_sg_dump function to output
data when using debugs.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

lib: Setup prefix.h to allow it to store (s,g)

We need the ability to store the (s,g) in a struct prefix.
This will allow us to consolidate some duplicated code in
pimd as well as set us up to switch from a link list to a
table to store (s,g) state.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix join in register to use correct nexthop

pim was sending the join from the RP towards the FHR with
a address that was the source instead of the nexthop.  This join
was treated as a non-local and nothing was done with it.

Ticket: CM-11945
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Start switchover to using a PRUNE (S,G) for uninteresting streams

When we receive a register for a (S,G) that we have no interest in
prune it off and send the register stop.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

zebra: API to locate client structure based on protocol

Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket:
Reviewed By: CCR-4968
Testing Done: Tested with subsequent patch(es)

pimd: Make pim_upstream_switch non static

Allow pim_upstream_switch to be called from outside of pim_upstream.c
Also change the assert to an if test to just correctly stop the
timer.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: change string to JOINPRUNE

Change the JP message string to JOINPRUNE.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Refactor pim message type to an enum

Change the pim message type to an enum and add the ability
to output a string based upon message type.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Use XCALLOC instead of XMALLOC

Ensure that all data structures start out
as 0 filled.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix PACKETDUMP compile errors.

signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: First Schwag at pim_register_stop

Implement the pim_register_stop state machine.  There are still a few
bugs still but this is enough to get us rolling a bit more.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Refactor ifchannel creation.

Remove unnecessary function.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Remove unneeded function.

Remove the prune_echo function as that it just took some
data and passed it into another function.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Properly initialize and delete t_rs_timer

Ensure that we properly initialize and stop the t_rs_timer.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Create register stop timer for DR

When a register stop is received, create the register stop
timer and associated state machine.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add null_register bit to pim_register_send

When sending a pim register message to an RP, we need
the ability to set the null bit in the message.  This
adds the ability to do so.

Additionally we need to switch the ip_hdr to a const uint8_t *buf
because pim_register_send really shouldn't know or care about
the fact it's a 'struct ip'.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add pim_channel_del_oif

For a given interface remove the interface from the list
of outgoing interfaces for a mroute and reinstall it
into the kernel.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: create pim_upstream_state2str

Allow update of show command to understant all
pim upstream states.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fix use of 0 for NULL

pimd uses allot of 0's to represent NULL.  Not a good
programming practice.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Add decision point to send register message

When we receive a register stop we will have created a
timer for this.  As such if the t_rs_timer pointer will
be non-NULL at this point.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Refactor pim message receive

We were using a variety of techniques to handle
incoming pim packets.  Refactor to use a switch
statement to handle the incoming packets.

Also add the ability to notice that we are getting
a register stop.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Send Register-Stop from RP

The RP now has the ability to send a register stop message
to the originator of the packet in order to tell it to
stop encapsulating packets to the RP.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Set correct parameters to pim_register_stop_send

Setup the pim_register_stop_send function to
take the correct parameters.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Fixup some dead code

Remove some dead code.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

pimd: Create pim_encode_addr_group

Create the ability to encode the group address in a message.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>

lib: add grammar_sandbox to .gitignore

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>

Merge pull request #22 from qlyoung/fix-do-tab

lib: fix crash when tab-completing `do ...` commands

lib: fix crash when tab-completing `do ...` commands

Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>

Merge pull request #6 from opensourcerouting/dev/osr/vty_pending

parser: accept non-words as first tokens & numbers as word tokens

Merge pull request #5 from freerangerouting/dev/osr/fixes_plus_vty_keywords

Merge branch 'dev/osr/fixes_plus_vty_keywords'

lib: parser: remove startnode & sentence_root

This removes an artificial restriction for the first token in a
command's graph to be a WORD_TKN.  The intention seems to be to prohibit
empty paths through a command, and to restrict "explosion" of choices in
the root node.

The better approach to the former is to check for an empty path after
the definition is parsed.  The latter will happen anyway, by duplication
of the command, which just makes it worse...

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

lib: parser: accept number-only word tokens

There seems to be no reason why numbers don't work as plain word tokens;
this is useful to have "number choices" or constants, e.g. <128|192|256>
for bit encryption lengths.

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

build: automake 1.12 to deal with flex & bison

bison conditionally writes its output to different files based on the
filenames specified in the source code.  This could be disabled,
however...  flex changes its output filenames when "prefix" is
specified.  And ylwrap from <1.11 doesn't understand how to handle the
header file...

...so this requires automake 1.12 which can deal with this properly.

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

lib: parser: move allowrepeat to cmd_token

struct graph_node isn't quite the right place to control matcher
behaviour.

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

bgpd: shuffle qobj_init()

bgp_master_init is called first thing in main(), so we need to wedge a
qobj_init() call in there...  this needs some improvement...

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

lib: parser: reorder bison incarnations

This shuffles the code blocks in command_parser.y to match file output
order, then adjusts things to make the include handling less messy.

(also dropped unused DECIMAL_STRLEN_MAX define.)

This should hopefully fix the build on NetBSD 6.

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

build: check flex >= 2.5.20 is available

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

build: fix bison < 3.0 compatibility

bison-2.7.x really wants "foo" for api.prefix while bison-3.0.x really
wants {foo} ... great.

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>