Donald Sharp [Wed, 1 Sep 2021 10:30:33 +0000 (06:30 -0400)]
ospf6d: Prevent crash of show ipv6 ospf data adv-router 0.0.0.0 linkstate-id 0.0.0.0
With this sequence of events:
eva# conf
eva(config)# router ospf6
eva(config-ospf6)# end
eva# show ipv6 ospf data adv-router 0.0.0.0 linkstate-id 0.0.0.0
OSPF6: Received signal 11 at 1630442431 (si_addr 0x0, PC 0x559dcfa3a656); aborting...
OSPF6: zlog_signal+0x18c 7fd2cc8229f77fff606775d0 /lib/libfrr.so.0 (mapped at 0x7fd2cc770000)
OSPF6: core_handler+0xe3 7fd2cc8616ad7fff606776f0 /lib/libfrr.so.0 (mapped at 0x7fd2cc770000)
OSPF6: funlockfile+0x50 7fd2cc74f1407fff60677840 /lib/x86_64-linux-gnu/libpthread.so.0 (mapped at 0x7fd2cc73b000)
OSPF6: ---- signal ----
OSPF6: ospf6_lsdb_type_show_wrapper+0x5d 559dcfa3a6567fff60677dd0 /usr/lib/frr/ospf6d (mapped at 0x559dcf9a5000)
OSPF6: show_ipv6_ospf6_database_adv_router_linkstate_id+0x1f9 559dcfa3c24a7fff60677e50 /usr/lib/frr/ospf6d (mapped at 0x559dcf9a5000)
ospfd: add dead-interval 40 if configured in show running
Problem Statement:
==================
When hello-interval is configured as 5, automatically dead interval becomes
4 times of hello i.e 20 seconds. But user wants the dead interval as
40 seconds and hello as 5 seconds. Therefore user configures it.
Now "ip ospf dead-interval 40" is not shown in "show running-config"
Therefore when user restarts the daemon, the dead interval goes back to
20 seconds and the neighbors are down.
Fix:
==================
If user configures dead-interval as 40, show it in show running config.
Quentin Young [Sun, 29 Aug 2021 23:33:34 +0000 (19:33 -0400)]
docker: build libyang2 along with FRR
Alpine images have been broken for some time because libyang2 is not
available in Alpine. This patch updates our Dockerfile to build a
libyang2 APK and install it into the image to satisfy FRR's libyang2
dependency.
Unfortunately, libyang2 erroneously includes an internal header from
glibc, making it dependent on glibc to build. FRR's official Docker
images are based on Alpine, which only offers musl libc. Until libyang2
fixes this problem, the libyang2 source that is installed in this image
is a patched version that is compatible with musl libc and not an
official version.
Donatas Abraitis [Sun, 29 Aug 2021 18:54:13 +0000 (21:54 +0300)]
bgpd: Add `neighbor PEER link-bw-encoding-ieee`
This is to avoid breaking changes between existing deployments of
extended community for bandwidth encoding. By default FRR uses uint32
to encode bandwidth, which is not as the draft requires (IEEE floating-point).
This switch enables the required encoding per-peer.
The bandwidth of the link is expressed as 4
octets in IEEE floating point format, units being bytes (not bits!)
per second. It is carried in the Local Administrator subfield of the
Value Field.
Modified the zapi send receive of the c-bit to only
be under the HAVE_BFDD. If you are using ptm-bfd
then the decoder function still expects this to be
sent down. This commit puts this behavior back
Renato Westphal [Thu, 26 Aug 2021 16:10:41 +0000 (13:10 -0300)]
ospf6d: extend the "redistribute" command with more options
Add the "metric" and "metric-type" options to the "redistribute"
command.
This is a small commit since the logic of setting the metric
value and type of external routes was already present due to the
implementation of the "default-information originate" command months
ago. This commit merely extends the "redistribute" command to
leverage that functionality.
Philippe Guibert [Wed, 25 Aug 2021 09:46:42 +0000 (11:46 +0200)]
lib, zebra: complete the ndm flags on zclient api
Insist on the fact that zclient neighbor state flags are
mapped over netlink state flags. List all the defines
currently known on kernel, and create a netlink API to
convert netlink values to zclient values. The function is
simplified as it is a 1-1 match.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Philippe Guibert [Wed, 25 Aug 2021 09:40:41 +0000 (11:40 +0200)]
nhrp, zebra, lib: pass exact received neighbor state value to nhrp
As NHRP expects some notification of neighboring entries on GRE
interface, when a new interface notification is encountered, the
exact neighbor state flag is found. Previously, the flag passed
to the upper layer was forced to NDM_STATE which is REACHABLE,
as can be seen on below trace:
2021/08/25 10:58:39 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x2 cache used 1 type 5
When passing the real value, NHRP received an other value like STALE.
2021/08/25 11:28:44 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x4 cache used 0 type 5
This flag is important for NHRP, as it permits to monitor the link
layer of NHRP entries.
Fixes: d603c0774eba ("nhrp, zebra, lib: enforce usage of zapi_neigh_ip structure") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As such, using prefix2str() (or the %pFX format specifier) isn't
correct when logging such routes.
This commit adds a few special cases here and there to handle
OSPF6_DEST_TYPE_ROUTER routes differently. It'd probably be a good
idea to add a helper function to handle all cases in a single place,
but that can be left for a second moment.
Prerana-GB [Fri, 6 Aug 2021 15:17:04 +0000 (15:17 +0000)]
bgpd: BGP knob to teardown session immediately when peer is unreachable
When BGP is notified by RIB that peer address is unreachable then BGP session must be brought
down immediately and not wait for the hold-timer expiry. Today single-hop EBGP already behaves
this way but need to change for iBGP and multi-hop EBGP sessions.
Sai Gomathi [Wed, 18 Aug 2021 08:28:28 +0000 (01:28 -0700)]
pimd: IGMP groups are not getting timeout
Problem :
=======
When all the groups from Ixia are stopped,
groups still keep refreshing and not getting timeout
RCA:
====
IGMP Report is coming in include mode without any source address, this problem will come.
Fix :
===
If the requested filter mode is INCLUDE *and* the requested
source list is empty, then the entry corresponding to the
requested interface and multicast address is deleted if present.
If no such entry is present, the request is ignored.
When an interface receives the IGMP report without any source, then the group is deleted.
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Renato Westphal [Thu, 19 Aug 2021 00:38:18 +0000 (21:38 -0300)]
ospf6d: remove incorrect debug guard
Also, update the ospf6_topo2 topotest since the expected output
was wrong. With this fix, NSSA routes will be created on r2
("redistribute connected"), and NSSA routes appear in the routing
table as regular external routes.
projects / matthieu / frr.git / log