From: Martin Winter <mwinter@opensourcerouting.org>
Date: Sat, 15 Apr 2017 10:13:07 +0000 (-0700)
Subject: redhat: Add (combined) init.d script for FRR with daemon selection based on /etc... 
X-Git-Tag: reindent-master-before~92^2~2^2~12
X-Git-Url: https://git.puffer.fish/?a=commitdiff_plain;h=c2953ac5d66c071c38e80305ba9d62d44da40625;p=matthieu%2Ffrr.git

redhat: Add (combined) init.d script for FRR with daemon selection based on /etc/frr/daemons

- Provide new frr init script
- Remove separate per-deamon init.d scripts

Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
---

diff --git a/redhat/Makefile.am b/redhat/Makefile.am
index f7a143ff73..0a851a38d2 100644
--- a/redhat/Makefile.am
+++ b/redhat/Makefile.am
@@ -1,8 +1,5 @@
 
-EXTRA_DIST = bgpd.init isisd.init \
-	ospf6d.init ospfd.init ldpd.init \
+EXTRA_DIST = frr.init daemons \
 	frr.logrotate frr.pam frr.spec \
-	frr.sysconfig ripd.init ripngd.init  \
-	watchfrr.init pimd.init  zebra.init  \
 	README.rpm_build.md
 
diff --git a/redhat/bgpd.init b/redhat/bgpd.init
deleted file mode 100644
index d200b0baaa..0000000000
--- a/redhat/bgpd.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/bgpd.conf
-
-### BEGIN INIT INFO
-# Provides: bgpd
-# Short-Description: BGP routing engine
-# Description: BGP routing engine for use with Zebra
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="bgpd"
-cmd=bgpd
-LOCK_FILE=/var/lock/subsys/bgpd
-CONF_FILE=/etc/frr/bgpd.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $BGPD_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/daemons b/redhat/daemons
new file mode 100644
index 0000000000..ce0f7747a2
--- /dev/null
+++ b/redhat/daemons
@@ -0,0 +1,59 @@
+# This file tells the frr package which daemons to start.
+#
+# Entries are in the format: <daemon>=(yes|no|priority)
+#   0, "no"  = disabled
+#   1, "yes" = highest priority
+#   2 .. 10  = lower priorities
+#
+# For daemons which support multiple instances, a 2nd line listing
+# the instances can be added. Eg for ospfd:
+#   ospfd=yes
+#   ospfd_instances="1,2"
+#
+# Priorities were suggested by Dancer <dancer@zeor.simegen.com>.
+# They're used to start the FRR daemons in more than one step
+# (for example start one or two at network initialization and the
+# rest later). The number of FRR daemons being small, priorities
+# must be between 1 and 9, inclusive (or the initscript has to be
+# changed). /etc/init.d/frr then can be started as
+#
+#   /etc/init.d/frr <start|stop|restart|<priority>>
+#
+# where priority 0 is the same as 'stop', priority 10 or 'start'
+# means 'start all'
+#
+# Sample configurations for these daemons can be found in
+# /usr/share/doc/frr/examples/.
+#
+# ATTENTION:
+#
+# When activation a daemon at the first time, a config file, even if it is
+# empty, has to be present *and* be owned by the user and group "frr", else
+# the daemon will not be started by /etc/init.d/frr. The permissions should
+# be u=rw,g=r,o=.
+# When using "vtysh" such a config file is also needed. It should be owned by
+# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
+#
+watchfrr_enable=no
+watchfrr_options=("-Az" "-b_" "-r/etc/init.d/frr_restart_%s" "-s/etc/init.d/frr_start_%s" "-k/etc/init.d/frr_stop_%s")
+#
+zebra=no
+bgpd=no
+ospfd=no
+ospf6d=no
+ripd=no
+ripngd=no
+isisd=no
+ldpd=no
+#
+# Command line options for the daemons
+#
+zebra_options=("-A 127.0.0.1")
+bgpd_options=("-A 127.0.0.1")
+ospfd_options=("-A 127.0.0.1")
+ospf6d_options=("-A ::1")
+ripd_options=("-A 127.0.0.1")
+ripngd_options=("-A ::1")
+isisd_options=("-A 127.0.0.1")
+ldpd_options=("-A 127.0.0.1")
+
diff --git a/redhat/frr.init b/redhat/frr.init
new file mode 100755
index 0000000000..c8c0cee407
--- /dev/null
+++ b/redhat/frr.init
@@ -0,0 +1,555 @@
+#!/bin/bash
+#
+#   /etc/rc.d/init.d/frr
+#
+#   Start/Stop the FRR Routing daemons
+#   <any general comments about this init script>
+#
+# chkconfig: 2345 15 85
+#
+# description: FRRouting (FRR) is a routing suite for IP routing protocols 
+#              like BGP, OSPF, RIP and others. This script contols the main
+#              daemon "frr" as well as the individual protocol daemons.
+#
+### BEGIN INIT INFO
+# Provides: frr
+# Required-Start: $local_fs $network $syslog
+# Required-Stop: $local_fs $syslog
+# Should-Start: $syslog
+# Should-Stop: $network $syslog
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Start/Stop the FRR Routing daemons
+# Description: FRRouting (FRR) is a routing suite for IP routing protocols 
+#              like BGP, OSPF, RIP and others. This script contols the main
+#              daemon "frr" as well as the individual protocol daemons.
+### END INIT INFO
+
+PATH=/bin:/usr/bin:/sbin:/usr/sbin
+D_PATH=/usr/lib/frr
+C_PATH=/etc/frr
+V_PATH=/var/run/frr
+
+# Local Daemon selection may be done by using /etc/frr/daemons.
+# See /usr/share/doc/frr/README.Debian.gz for further information.
+# Keep zebra first and do not list watchfrr!
+DAEMONS="zebra bgpd ripd ripngd ospfd ospf6d isisd pimd ldpd"
+MAX_INSTANCES=5
+RELOAD_SCRIPT=/usr/lib/frr/frr-reload.py
+
+. /etc/init.d/functions
+
+# Print the name of the pidfile.
+pidfile()
+{
+    echo "$V_PATH/$1.pid"
+}
+
+# Print the name of the vtysh.
+vtyfile()
+{
+    echo "$V_PATH/$1.vty"
+}
+
+# Check if daemon is started by using the pidfile.
+started()
+{
+    [ ! -e `pidfile $1` ] && return 3
+    if [ -n "$2" ] && [ "$2" == "log" ]; then
+        status -p `pidfile $1` $1 && return 0 || return $?
+    else
+        kill -0 `cat \`pidfile $1\`` 2> /dev/null || return 1
+        return 0
+    fi
+}
+
+# Loads the config via vtysh -b if configured to do so.
+vtysh_b ()
+{
+        # Rember, that all variables have been incremented by 1 in convert_daemon_prios()
+        if [ "$vtysh_enable" = 2 -a -f $C_PATH/frr.conf ]; then
+                /usr/bin/vtysh -b -n
+        fi
+}
+
+# Check if the daemon is activated and if its executable and config files
+# are in place.
+# params:       daemon name
+# returns:      0=ok, 1=error
+check_daemon()
+{
+    # If the integrated config file is used the others are not checked.
+    if [ -r "$C_PATH/frr.conf" ]; then
+        return 0
+    fi
+
+    # vtysh_enable has no config file nor binary so skip check.
+    # (Not sure why vtysh_enable is in this list but does not hurt)
+    if [ $1 != "watchfrr" -a $1 != "vtysh_enable" ]; then
+        # check for daemon binary
+        if [ ! -x "$D_PATH/$1" ]; then return 1; fi
+
+        # check for config file
+        if [ -n "$2" ]; then
+            if [ ! -r "$C_PATH/$1-$2.conf" ]; then
+                touch "$C_PATH/$1-$2.conf"
+                chown frr:frr "$C_PATH/$1-$2.conf"
+            fi
+        elif [ ! -r "$C_PATH/$1.conf" ]; then
+            touch "$C_PATH/$1.conf"
+            chown frr:frr "$C_PATH/$1.conf"
+        fi
+    fi
+    return 0
+}
+
+# Starts the server if it's not already running according to the pid file.
+# The Frr daemons creates the pidfile when starting.
+start()
+{
+    ulimit -n $MAX_FDS > /dev/null 2> /dev/null
+    if [ "$1" = "watchfrr" ]; then
+
+        # We may need to restart watchfrr if new daemons are added and/or
+        # removed
+        if started "$1" ; then
+            stop watchfrr
+        else
+            # Echo only once. watchfrr is printed in the stop above
+            echo -n " $1"
+        fi
+
+        if [ -e /var/run/frr/watchfrr.started ] ; then
+            rm /var/run/frr/watchfrr.started
+        fi
+        daemon --pidfile=`pidfile $1` "$D_PATH/$1" -d "${watchfrr_options[@]}"
+        RETVAL=$?
+        [ $RETVAL -ne 0 ] && break
+        for i in `seq 1 10`;
+        do
+            if [ -e /var/run/frr/watchfrr.started ] ; then
+                RETVAL=0
+                break
+            else
+                sleep 1
+            fi
+        done
+        RETVAL=1
+    elif [ -n "$2" ]; then
+        echo -n " $1-$2"
+        if ! check_daemon $1 $2 ; then
+            echo -n " (binary does not exist)"
+            return;
+        fi
+        daemon --pidfile=`pidfile $1-$2` "$D_PATH/$1" -d `eval echo "$""$1""_options"` -n "$2"
+        RETVAL=$?
+    else
+        echo -n " $1 "
+        if ! check_daemon $1; then
+            echo " (binary does not exist)"
+            return;
+        fi
+        daemon --pidfile=`pidfile $1` "$D_PATH/$1" -d `eval echo "$""$1""_options"`
+        RETVAL=$?
+    fi
+    echo
+    [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$1
+    return $RETVAL
+}
+
+# Stop the daemon given in the parameter, printing its name to the terminal.
+stop()
+{
+    local inst
+
+    if [ -n "$2" ]; then
+       inst="$1-$2"
+    else
+       inst="$1"
+    fi
+
+    if ! started "$inst" ; then
+        # echo -n " ($inst)"
+        return 0
+    else
+        echo -n " $inst"
+        PIDFILE=`pidfile $inst`
+        PID=`cat $PIDFILE 2>/dev/null`
+        killproc -p "$PIDFILE" "$D_PATH/$1"
+        RETVAL=$?
+        [ $RETVAL -eq 0 ] && rm -f $lockfile
+        rm -f `pidfile $inst`
+        rm -f `vtyfile $inst`
+        echo
+        return $RETVAL
+    fi
+}
+
+# Converts values from /etc/frr/daemons to all-numeric values.
+convert_daemon_prios()
+{
+    for name in $DAEMONS zebra vtysh_enable watchfrr_enable; do
+        # First, assign the value set by the user to $value
+        eval value=\${${name}:0:3}
+
+        # Daemon not activated or entry missing?
+        if [ "$value" = "no" -o "$value" = "" ]; then value=0; fi
+
+        # These strings parsed for backwards compatibility.
+        if [ "$value" = "yes"  -o  "$value" = "true" ]; then
+            value=1;
+        fi
+
+        # Zebra is threatened special. It must be between 0=off and the first
+        # user assigned value "1" so we increase all other enabled daemons' values.
+        if [ "$name" != "zebra" -a "$value" -gt 0 ]; then value=`expr "$value" + 1`; fi
+
+        # If e.g. name is zebra then we set "zebra=yes".
+        eval $name=$value
+    done
+}
+
+# Starts watchfrr for all wanted daemons.
+start_watchfrr()
+{
+    local daemon_name
+    local daemon_prio
+    local found_one
+    local daemon_inst
+
+    # Start the monitor daemon only if desired.
+    if [ 0 -eq "$watchfrr_enable" ]; then
+        return
+    fi
+
+    # Check variable type
+    if ! declare -p watchfrr_options | grep -q '^declare \-a'; then
+        echo
+        echo "ERROR: The variable watchfrr_options from /etc/frr/daemons must be a BASH array!"
+        echo "ERROR: Please convert config file and restart!"
+        exit 1
+    fi
+
+    # Which daemons have been started?
+    found_one=0
+    for daemon_name in $DAEMONS; do
+        eval daemon_prio=\$$daemon_name
+        if [ "$daemon_prio" -gt 0 ]; then
+            eval "daemon_inst=\${${daemon_name}_instances//,/ }"
+            if [ -n "$daemon_inst" ]; then
+                for inst in ${daemon_inst}; do
+                    eval "inst_disable=\${${daemon_name}_${inst}}"
+                    if [ -z ${inst_disable} ] || [ ${inst_disable} != 0 ]; then
+                        if check_daemon $daemon_name $inst; then
+                            watchfrr_options+=("${daemon_name}-${inst}")
+                        fi
+                    fi
+                done
+            else
+                if check_daemon $daemon_name; then
+                    watchfrr_options+=($daemon_name)
+                fi
+            fi
+            found_one=1
+        fi
+    done
+
+    # Start if at least one daemon is activated.
+    if [ $found_one -eq 1 ]; then
+        echo "Starting FRRouting monitor daemon:"
+        start watchfrr
+    fi
+}
+
+# Stopps watchfrr.
+stop_watchfrr()
+{
+    echo "Stopping FRRouting monitor daemon:"
+    stop watchfrr
+}
+
+# Stops all daemons that have a lower level of priority than the given.
+# (technically if daemon_prio >= wanted_prio)
+stop_prio()
+{
+    local wanted_prio
+    local daemon_prio
+    local daemon_list
+    local daemon_inst
+    local inst
+
+    if [ -n "$2" ] && [[ "$2" =~ (.*)-(.*) ]]; then
+        daemon=${BASH_REMATCH[1]}
+        inst=${BASH_REMATCH[2]}
+    else
+        daemon="$2"
+    fi
+
+    wanted_prio=$1
+    daemon_list=${daemon:-$DAEMONS}
+
+    echo "Stopping FRRouting daemons (prio:$wanted_prio):"
+
+    for prio_i in `seq 10 -1 $wanted_prio`; do
+        for daemon_name in $daemon_list; do
+            eval daemon_prio=\${${daemon_name}:0:3}
+            daemon_inst=""
+            if [ $daemon_prio -eq $prio_i ]; then
+                eval "daemon_inst=\${${daemon_name}_instances//,/ }"
+                if [ -n "$daemon_inst" ]; then
+                    for i in ${daemon_inst}; do
+                        if [ -n "$inst" ] && [ "$i" == "$inst" ]; then
+                            stop "$daemon_name" "$inst"
+                        elif [ x"$inst"  == x ]; then
+                            stop "$daemon_name" "$i"
+                        fi
+                    done
+                else
+                    stop "$daemon_name"
+                fi
+            fi
+        done
+    done
+
+    if [ -z "$inst" ]; then
+    # Now stop other daemons that're prowling, coz the daemons file changed
+        echo "Stopping other FRRouting daemons"
+        if [ -n "$daemon" ]; then
+            eval "file_list_suffix="$V_PATH"/"$daemon*""
+        else
+            eval "file_list_suffix="$V_PATH/*""
+        fi
+        for pidfile in $file_list_suffix.pid; do
+            if [ -f "$pidfile" ]; then
+                filename=${pidfile##*/}
+                daemon=${filename%.*}
+                echo -n " $daemon"
+                killproc -p "$pidfile" "$daemon"
+                RETVAL=$?
+                [ $RETVAL -eq 0 ] && rm -f $lockfile
+                rm -f "$pidfile"
+                echo
+            fi
+        done
+        echo -n "Removing remaining .vty files"
+        for vtyfile in $file_list_suffix.vty; do
+            rm -rf "$vtyfile"
+        done
+        echo
+    fi
+}
+
+# Starts all daemons that have a higher level of priority than the given.
+# (technically if daemon_prio <= wanted_prio)
+start_prio()
+{
+    local wanted_prio
+    local daemon_prio
+    local daemon_list
+    local daemon_name
+    local daemon_inst
+    local inst
+
+    if [ -n "$2" ] && [[ "$2" =~ (.*)-(.*) ]]; then
+        daemon=${BASH_REMATCH[1]}
+        inst=${BASH_REMATCH[2]}
+    else
+        daemon="$2"
+    fi
+
+    wanted_prio=$1
+    daemon_list=${daemon:-$DAEMONS}
+
+    echo "Starting FRRouting daemons (prio:$wanted_prio):"
+
+    for prio_i in `seq 1 $wanted_prio`; do
+        for daemon_name in $daemon_list; do
+            eval daemon_prio=\$${daemon_name}
+            daemon_inst=""
+            if [ $daemon_prio -eq $prio_i ]; then
+                eval "daemon_inst=\${${daemon_name}_instances//,/ }"
+                if [ -n "$daemon_inst" ]; then
+                    if [ `echo "$daemon_inst" | wc -w` -gt ${MAX_INSTANCES} ]; then
+                        echo "Max instances supported is ${MAX_INSTANCES}. Aborting"
+                        exit 1
+                    fi
+                    # Check if we're starting again by switching from single instance
+                    # to MI version
+                    if started "$daemon_name"; then
+                        PIDFILE=`pidfile $daemon_name`
+                        killproc -p "$PIDFILE" "$daemon_name"
+                        rm -f `pidfile $1`
+                        rm -f `vtyfile $1`
+                    fi
+
+                    for i in ${daemon_inst}; do
+                        if [ -n "$inst" ] && [ "$i" == "$inst" ]; then
+                            start "$daemon_name" "$inst"
+                        elif [ x"$inst" == x ]; then
+                            start "$daemon_name" "$i"
+                        fi
+                    done
+                else
+                    # Check if we're starting again by switching from
+                    # single instance to MI version
+                    eval "file_list_suffix="$V_PATH"/"$daemon_name-*""
+                    for pidfile in $file_list_suffix.pid; do
+                        if [ -f "$pidfile" ]; then
+                            killproc -p "$pidfile" "$daemon_name"
+                            rm -rf "$pidfile"
+                        fi
+                    done
+                    for vtyfile in $file_list_suffix.vty; do
+                        rm -rf "$vtyfile"
+                    done
+
+                    start "$daemon_name"
+                fi
+            fi
+        done
+    done
+}
+
+check_status()
+{
+    local daemon_name
+    local daemon_prio
+    local daemon_inst
+    local failed_status=0
+
+    if [ -n "$1" ] && [[ "$1" =~ (.*)-(.*) ]]; then
+        daemon=${BASH_REMATCH[1]}
+        inst=${BASH_REMATCH[2]}
+    else
+        daemon="$1"
+    fi
+
+    daemon_list=${daemon:-$DAEMONS}
+
+    # Which daemons have been started?
+    for daemon_name in $daemon_list; do
+        eval daemon_prio=\$$daemon_name
+        if [ "$daemon_prio" -gt 0 ]; then
+            eval "daemon_inst=\${${daemon_name}_instances//,/ }"
+            if [ -n "$daemon_inst" ]; then
+                for i in ${daemon_inst}; do
+                    if [ -n "$inst" -a "$inst" = "$i" ]; then
+                        started "$1" "log" || failed_status=$?
+                    elif [ -z "$inst" ]; then
+                        started "$daemon_name-$i" "log" || failed_status=$?
+                    fi
+                done
+            else
+                started "$daemon_name" "log" || failed_status=$?
+            fi
+        fi
+    done
+
+    # All daemons that need to have been started are up and running
+    return $failed_status
+}
+
+#########################################################
+#               Main program                            #
+#########################################################
+
+# Config broken but script must exit silently.
+[ ! -r "$C_PATH/daemons" ] && exit 0
+
+# Load configuration
+. "$C_PATH/daemons"
+
+# Read configuration variable file if it is present
+[ -r /etc/sysconfig/frr ] && . /etc/sysconfig/frr
+
+MAX_INSTANCES=${MAX_INSTANCES:=5}
+
+# Set priority of un-startable daemons to 'no' and substitute 'yes' to '0'
+convert_daemon_prios
+
+if [ ! -d $V_PATH ]; then
+    echo "Creating $V_PATH"
+    mkdir -p $V_PATH
+    chown frr:frr $V_PATH
+    chmod 755 /$V_PATH
+fi
+
+if [ -n "$3" ] && [ "$3" != "all" ]; then
+    dmn="$2"-"$3"
+elif [ -n "$2" ] && [ "$2" != "all" ]; then
+    dmn="$2"
+fi
+
+case "$1" in
+    start)
+        # Try to load this necessary (at least for 2.6) module.
+        if [ -d /lib/modules/`uname -r` ] ; then
+            echo "Loading capability module if not yet done."
+            LC_ALL=C modprobe -a capability 2>&1 | egrep -v "(not found|Can't locate)"
+        fi
+
+        # Start all daemons
+        cd $C_PATH/
+        if [ "$2" != "watchfrr" ]; then
+          start_prio 10 $dmn
+        fi
+        start_watchfrr
+        vtysh_b
+        ;;
+
+    1|2|3|4|5|6|7|8|9|10)
+        # Stop/start daemons for the appropriate priority level
+        stop_prio $1
+        start_prio $1
+        vtysh_b
+        ;;
+
+    stop|0)
+        # Stop all daemons at level '0' or 'stop'
+        stop_watchfrr
+        if [ "$dmn" != "watchfrr" ]; then
+            [ -n "${dmn}" ] && eval "${dmn/-/_}=0"
+            stop_prio 0 $dmn
+        fi
+
+        if [ -z "$dmn" -o "$dmn" = "zebra" ]; then
+            echo "Removing all routes made by zebra."
+            ip route flush proto zebra
+        else
+            [ -n "$dmn" ] && eval "${dmn/-/_}=0"
+            start_watchfrr
+        fi
+        ;;
+
+    reload)
+        # Just apply the commands that have changed, no restart necessary
+        [ ! -x "$RELOAD_SCRIPT" ] && echo "frr-reload script not available" && exit 0
+        NEW_CONFIG_FILE="${2:-$C_PATH/frr.conf}"
+        [ ! -r $NEW_CONFIG_FILE ] && echo "Unable to read new configuration file $NEW_CONFIG_FILE" && exit 1
+        echo "Applying only incremental changes to running configuration from frr.conf"
+        "$RELOAD_SCRIPT" --reload /etc/frr/frr.conf
+        exit $?
+        ;;
+
+    status)
+        check_status $dmn
+        exit $?
+        ;;
+
+    restart|force-reload)
+        $0 stop $dmn
+        sleep 1
+        $0 start $dmn
+        ;;
+
+    *)
+        echo "Usage: /etc/init.d/frr {start|stop|status|reload|restart|force-reload|<priority>} [daemon]"
+        echo "       E.g. '/etc/init.d/frr 5' would start all daemons with a prio 1-5."
+        echo "       reload applies only modifications from the running config to all daemons."
+        echo "       reload neither restarts starts any daemon nor starts any new ones."
+        echo "       Read /usr/share/doc/frr/README.Debian for details."
+        exit 1
+        ;;
+esac
+
+exit 0
diff --git a/redhat/frr.spec.in b/redhat/frr.spec.in
index 354a73242d..17a07d1555 100644
--- a/redhat/frr.spec.in
+++ b/redhat/frr.spec.in
@@ -34,7 +34,6 @@
 %define     zeb_rh_src    %{zeb_src}/redhat
 %define     zeb_docs      %{zeb_src}/doc
 %define     frr_tools     %{zeb_src}/tools
-%define     cumulus_dir   %{zeb_src}/cumulus/etc
 
 # defines for configure
 %define     _localstatedir  /var/run/frr
@@ -162,8 +161,8 @@ Contributed/3rd party tools which may be of use with frr.
 
 %package pythontools
 Summary: python tools for frr
-BuildRequires: python >= 2.7
-Requires: python >= 2.7 python-ipaddr
+BuildRequires: python
+Requires: python python-ipaddr
 Group: System Environment/Daemons
 
 %description pythontools
@@ -303,17 +302,11 @@ install %{frr_tools}/frr.service \
     %{buildroot}%{_unitdir}/frr.service
 %else
 mkdir -p %{buildroot}/etc/rc.d/init.d
-for daemon in %{all_daemons} ; do
-    if [ x"${daemon}" != x"" ] ; then
-        install %{zeb_rh_src}/${daemon}.init \
-            %{buildroot}/etc/rc.d/init.d/${daemon}
-    fi
-done
+install %{zeb_rh_src}/frr.init \
+    %{buildroot}/etc/rc.d/init.d/frr
 %endif
 
-install %{cumulus_dir}/frr/debian.conf %{buildroot}/etc/frr
-install %{cumulus_dir}/frr/daemons %{buildroot}/etc/frr
-install -m644 %{cumulus_dir}/default/frr %{buildroot}/etc/default
+install %{zeb_rh_src}/daemons %{buildroot}/etc/frr
 install -m644 %{zeb_rh_src}/frr.pam \
     %{buildroot}/etc/pam.d/frr
 install -m644 %{zeb_rh_src}/frr.logrotate \
@@ -380,11 +373,7 @@ for daemon in %all_daemons ; do
     %systemd_post frr.service
 done
 %else
-for daemon in %all_daemons ; do
-    if [ x"${daemon}" != x"" ] ; then
-        /sbin/chkconfig --add ${daemon}
-    fi
-done
+/sbin/chkconfig --add frr
 %endif
 
 /sbin/install-info %{_infodir}/frr.info.gz %{_infodir}/dir
@@ -521,12 +510,8 @@ fi
     ## init.d Version
     ##
     if [ "$1" = "0" ]; then
-        for daemon in %all_daemons ; do
-            if [ x"${daemon}" != x"" ] ; then
-                /etc/rc.d/init.d/${daemon} stop  >/dev/null 2>&1
-                /sbin/chkconfig --del ${daemon}
-            fi
-        done
+        /etc/rc.d/init.d/frr stop  >/dev/null 2>&1
+        /sbin/chkconfig --del frr
     fi
 %endif
 /sbin/install-info --delete %{_infodir}/frr.info.gz %{_infodir}/dir
@@ -572,7 +557,7 @@ rm -rf %{buildroot}
 %endif
 %{_sbindir}/isisd
 %if %{with_ldpd}
-%{_sbindir}/ldpd
+    %{_sbindir}/ldpd
 %endif
 %if %{with_shared}
 %{_libdir}/lib*.so
@@ -584,24 +569,9 @@ rm -rf %{buildroot}
 %if "%{initsystem}" == "systemd"
     %config %{_unitdir}/frr.service
 %else
-    %config /etc/rc.d/init.d/zebra
-    %if %{with_watchfrr}
-        %config /etc/rc.d/init.d/watchfrr
-    %endif
-    %config /etc/rc.d/init.d/ripd
-    %config /etc/rc.d/init.d/ospfd
-    %config /etc/rc.d/init.d/bgpd
-    %config /etc/rc.d/init.d/ripngd
-    %config /etc/rc.d/init.d/ospf6d
-    %config /etc/rc.d/init.d/isisd
-    %if %{with_pimd}
-        %config /etc/rc.d/init.d/pimd
-    %endif
-    %if %{with_ldpd}
-        %config /etc/rc.d/init.d/ldpd
-    %endif
+    %config /etc/rc.d/init.d/frr
 %endif
-%config(noreplace) /etc/default/frr
+%config /etc/frr/daemons
 %config(noreplace) /etc/pam.d/frr
 %config(noreplace) %attr(640,root,root) /etc/logrotate.d/*
 
diff --git a/redhat/frr.sysconfig b/redhat/frr.sysconfig
deleted file mode 100644
index 97c28c807d..0000000000
--- a/redhat/frr.sysconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Default: Bind all daemon vtys to the loopback(s) only
-#
-BGPD_OPTS="-A 127.0.0.1"
-ISISD_OPTS="-A ::1"
-OSPF6D_OPTS="-A ::1"
-OSPFD_OPTS="-A 127.0.0.1"
-RIPD_OPTS="-A 127.0.0.1"
-RIPNGD_OPTS="-A ::1"
-ZEBRA_OPTS="-A 127.0.0.1"
-PIMD_OPTS="-A 127.0.0.1"
-LDPD_OPTS="-A 127.0.0.1"
-
-# Watchfrr configuration for LSB initscripts
-#
-# (Not needed with systemd: the service files are configured to automatically
-# restart any daemon on failure. If zebra fails, all running daemons will be
-# stopped; zebra will be started again; and then the previously running daemons
-# will be started again.)
-#
-# Uncomment and edit this line to reflect the daemons you are actually using:
-#WATCH_DAEMONS="zebra bgpd ospfd ospf6d ripd ripngd"
-#
-# Timer values can be adjusting by editing this line:
-WATCH_OPTS="-Az -b_ -r/sbin/service_%s_restart -s/sbin/service_%s_start -k/sbin/service_%s_stop"
diff --git a/redhat/isisd.init b/redhat/isisd.init
deleted file mode 100644
index b309e07542..0000000000
--- a/redhat/isisd.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/isisd.conf
-
-### BEGIN INIT INFO
-# Provides: isisd
-# Short-Description: IS-IS routing engine
-# Description: IS-IS routing engine for use with Zebra
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="isisd"
-cmd=isisd
-LOCK_FILE=/var/lock/subsys/isisd
-CONF_FILE=/etc/frr/isisd.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $ISISD_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/ldpd.init b/redhat/ldpd.init
deleted file mode 100644
index 3ade9bfe9f..0000000000
--- a/redhat/ldpd.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/ldpd.conf
-
-### BEGIN INIT INFO
-# Provides: ldpd
-# Short-Description: LDP engine
-# Description: LDP engine for use with Zebra
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="ldpd"
-cmd=ldpd
-LOCK_FILE=/var/lock/subsys/ldpd
-CONF_FILE=/etc/frr/ldpd.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $LDPD_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/ospf6d.init b/redhat/ospf6d.init
deleted file mode 100644
index 5c5a2af236..0000000000
--- a/redhat/ospf6d.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/ospf6d.conf
-
-### BEGIN INIT INFO
-# Provides: ospf6d
-# Short-Description: OSPF routing engine for IPv6
-# Description: OSPF routing engine for use with Zebra and IPv6
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="ospf6d"
-cmd=ospf6d
-LOCK_FILE=/var/lock/subsys/ospf6d
-CONF_FILE=/etc/frr/ospf6d.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $OSPF6D_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/ospfd.init b/redhat/ospfd.init
deleted file mode 100644
index e9cbbc739c..0000000000
--- a/redhat/ospfd.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/ospfd.conf
-
-### BEGIN INIT INFO
-# Provides: ospfd
-# Short-Description: OSPF routing engine
-# Description: OSPF routing engine for use with Zebra
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="ospfd"
-cmd=ospfd
-LOCK_FILE=/var/lock/subsys/ospfd
-CONF_FILE=/etc/frr/ospfd.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $OSPFD_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/pimd.init b/redhat/pimd.init
deleted file mode 100644
index 85cbf8d2b1..0000000000
--- a/redhat/pimd.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/pimd.conf
-
-### BEGIN INIT INFO
-# Provides: pimd
-# Short-Description: PIM multicast routing engine
-# Description: PIM routing engine for use with Zebra
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="pimd"
-cmd=pimd
-LOCK_FILE=/var/lock/subsys/pimd
-CONF_FILE=/etc/frr/pimd.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $PIMD_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/ripd.init b/redhat/ripd.init
deleted file mode 100644
index 8e25a83f4b..0000000000
--- a/redhat/ripd.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/ripd.conf
-
-### BEGIN INIT INFO
-# Provides: ripd
-# Short-Description: RIP routing engine
-# Description: RIP routing engine for use with Zebra
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="ripd"
-cmd=ripd
-LOCK_FILE=/var/lock/subsys/ripd
-CONF_FILE=/etc/frr/ripd.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $RIPD_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/ripngd.init b/redhat/ripngd.init
deleted file mode 100644
index 7b9fde4085..0000000000
--- a/redhat/ripngd.init
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-# chkconfig: - 16 84
-# config: /etc/frr/ripngd.conf
-
-### BEGIN INIT INFO
-# Provides: ripngd
-# Short-Description: RIP routing engine for IPv6
-# Description: RIP routing engine for use with Zebra and IPv6
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="ripngd"
-cmd=ripngd
-LOCK_FILE=/var/lock/subsys/ripngd
-CONF_FILE=/etc/frr/ripngd.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $RIPNGD_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/watchfrr.init b/redhat/watchfrr.init
deleted file mode 100644
index bc83415167..0000000000
--- a/redhat/watchfrr.init
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/bash
-# chkconfig: 2345 17 83
-
-### BEGIN INIT INFO
-# Provides: watchfrr
-# Short-Description: Frr watchdog
-# Description: Frr watchdog for use with Zebra
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="watchfrr"
-cmd=watchfrr
-LOCK_FILE=/var/lock/subsys/watchfrr
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# Check that there are daemons to be monitored.
-	[ -z "$WATCH_DAEMONS" ] && exit 1
-
-	echo -n $"Starting $PROG: "
-	daemon $cmd -d $WATCH_OPTS $WATCH_DAEMONS
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL
diff --git a/redhat/zebra.init b/redhat/zebra.init
deleted file mode 100644
index 1afb785431..0000000000
--- a/redhat/zebra.init
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/bash
-# chkconfig: - 15 85
-# config: /etc/frr/zebra.conf
-
-### BEGIN INIT INFO
-# Provides: zebra
-# Short-Description: GNU Zebra routing manager
-# Description: GNU Zebra routing manager
-### END INIT INFO
-
-# source function library
-. /etc/rc.d/init.d/functions
-
-# Get network config
-. /etc/sysconfig/network
-
-# frr command line options
-. /etc/sysconfig/frr
-
-RETVAL=0
-PROG="zebra"
-cmd=zebra
-LOCK_FILE=/var/lock/subsys/zebra
-CONF_FILE=/etc/frr/zebra.conf
-
-case "$1" in
-  start)
-	# Check that networking is up.
-	[ "${NETWORKING}" = "no" ] && exit 1
-
-	# The process must be configured first.
-	[ -f $CONF_FILE ] || exit 6
-	if [ `id -u` -ne 0 ]; then
-		echo $"Insufficient privilege" 1>&2
-		exit 4
-	fi
-
-	echo -n $"Starting $PROG: "
-	/sbin/ip route flush proto zebra
-	daemon $cmd -d $ZEBRA_OPTS -f $CONF_FILE
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && touch $LOCK_FILE
-	echo
-	;;
-  stop)
-	echo -n $"Shutting down $PROG: "
-	killproc $cmd
-	RETVAL=$?
-	[ $RETVAL -eq 0 ] && rm -f $LOCK_FILE
-	echo
-	;;
-  restart|reload|force-reload)
-	$0 stop
-	$0 start
-	RETVAL=$?
-	;;
-  condrestart|try-restart)
-	if [ -f $LOCK_FILE ]; then
-		$0 stop
-		$0 start
-	fi
-	RETVAL=$?
-	;;
-  status)
-	status $cmd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|force-reload|condrestart|try-restart|status}"
-	exit 2
-esac
-
-exit $RETVAL