From: Martin Winter <mwinter@opensourcerouting.org>
Date: Fri, 9 Jun 2017 03:34:22 +0000 (-0700)
Subject: debianpkg: Add initial README to document the steps required to build the debian... 
X-Git-Tag: frr-2.0.1~6^2~25
X-Git-Url: https://git.puffer.fish/?a=commitdiff_plain;h=8162348eb804b3d935c624bf96689e88bad8400e;p=matthieu%2Ffrr.git

debianpkg: Add initial README to document the steps required to build the debian packages with backports

Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
---

diff --git a/debianpkg/README.deb_build.md b/debianpkg/README.deb_build.md
new file mode 100644
index 0000000000..8ebd22217a
--- /dev/null
+++ b/debianpkg/README.deb_build.md
@@ -0,0 +1,83 @@
+Building your own FRRouting Debian Package
+==========================================
+(Tested on Ubuntu 12.04, 14.04, 16.04 and Debian 8)
+
+1. Follow the package installation as outlined in doc/Building_on_XXXX.md
+   (XXXX refers your OS Distribution) to install the required build packages
+
+2. Install the following additional packages:
+
+        apt-get install realpath equivs groff fakeroot debhelper
+
+3. Checkout FRR under a **unpriviledged** user account
+
+        git clone https://github.com/frrouting/frr.git frr
+
+4. Run Bootstrap and make distribution tar.gz
+
+        cd frr
+        ./bootstrap.sh
+        ./configure --with-pkg-extra-version=-MyDebPkgVersion
+        make dist
+            
+    Note: configure parameters are not important for the Debian Package
+    building - except the `with-pkg-extra-version` if you want to give the
+    Debian Package a specific name to mark your own unoffical build
+
+5. Edit `debianpkg/rules` and set the configuration as needed
+
+    Look for section `dh_auto_configure` to modify the configure
+    options as needed. Options might be different between main `rules` and 
+    `backports/XXXX/debian/rules`. Please adjust as needed on all files
+
+6. Create backports debian sources
+ 
+    Move the `debianpkg` to `debian` and create the backports
+    (Debian requires to not ship a `debian` directory inside the source
+    directory to avoid build conflicts with the reserved `debian` subdirectory
+    name during the build)
+
+        mv debianpkg debian
+        make -f debian/rules backports
+
+    This will create a `frr_*.orig.tar.gz` with the source (same as dist tar),
+    and multiple `frr_*.debian.tar.xz` and `frr_*.dsc` for the debian package
+    source on each backport supported distribution
+
+6. Create a new directory to build the package and populate with package src
+
+        mkdir frrpkg
+        cd frrpkg
+        tar xf ~/frr/frr_*.orig.tar.gz
+        cd frr*
+        . /etc/os-release
+        tar xf ~/frr/frr_*ubuntu*${VERSION_ID}*.debian.tar.xz
+
+7. Build Debian Package Dependencies and install them as needed
+
+        sudo mk-build-deps --install debian/control
+
+8. Build Debian Package
+
+        debuild -b -uc -us
+
+DONE.
+
+If all works correctly, then you should end up with the Debian packages under 
+`frrpkg`. If distributed, please make sure you distribute it together with
+the sources (`frr_*.orig.tar.gz`, `frr_*.debian.tar.xz` and `frr_*.dsc`)
+
+
+Enabling daemons after installation of the package:
+---------------------------------------------------
+
+1. Edit /etc/frr/daemons and enable required routing daemons (Zebra is probably needed for most deployments, so make sure to enable it.)
+ 
+2. Check your firewall / IPtables to make sure the routing protocols are
+allowed.
+        
+3. Start/Restart the daemons (or reboot)
+
+        systemctl restart frr
+            
+Configuration is stored in `/etc/frr/*.conf` files and daemon selection is stored in `/etc/frr/daemons`.