.. _logging:
+.. highlight:: c
+
Logging
=======
if (ret != buf)
XFREE(MTYPE_FOO, ret);
-Extensions
-^^^^^^^^^^
-
-``printfrr()`` format strings can be extended with suffixes after `%p` or
-`%d`. The following extended format specifiers are available:
-
-+-----------+--------------------------+----------------------------------------------+
-| Specifier | Argument | Output |
-+===========+==========================+==============================================+
-| ``%Lu`` | ``uint64_t`` | ``12345`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%Ld`` | ``int64_t`` | ``-12345`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pVA`` | ``struct va_format *`` | (recursive printfrr) |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pI4`` | ``struct in_addr *`` | ``1.2.3.4`` |
-| | | |
-| | ``in_addr_t *`` | |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pI6`` | ``struct in6_addr *`` | ``fe80::1234`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pIA`` | ``struct ipaddr *`` | ``1.2.3.4`` |
-| | | |
-| | | ``fe80::1234`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pFX`` | ``struct prefix *`` | ``fe80::1234/64`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pSG4`` | ``struct prefix_sg *`` | ``(*,1.2.3.4)`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pRN`` | ``struct route_node *`` | ``192.168.1.0/24`` (dst-only node) |
-| | | |
-| | | ``2001:db8::/32 from fe80::/64`` (SADR node) |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pNHv`` | ``struct nexthop *`` | ``1.2.3.4, via eth0`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pNHs`` | ``struct nexthop *`` | ``1.2.3.4 if 15`` |
-+-----------+--------------------------+----------------------------------------------+
-| ``%pFX`` | ``struct bgp_dest *`` | ``fe80::1234/64`` (available in BGP only) |
-+-----------+--------------------------+----------------------------------------------+
-| ``%.*pHX``| ``int len, void *ptr`` | ``12 34 56 78`` (hexdump) |
-+-----------+--------------------------+----------------------------------------------+
+.. c:function:: ssize_t bprintfrr(struct fbuf *fb, const char *fmt, ...)
+.. c:function:: ssize_t vbprintfrr(struct fbuf *fb, const char *fmt, va_list)
+
+ These are the "lowest level" functions, which the other variants listed
+ above use to implement their functionality on top. Mainly useful for
+ implementing printfrr extensions since those get a ``struct fbuf *`` to
+ write their output to.
+
+.. c:macro:: FMT_NSTD(expr)
+
+ This macro turns off/on format warnings as needed when non-ISO-C
+ compatible printfrr extensions are used (e.g. ``%.*p`` or ``%Ld``.)::
+
+ vty_out(vty, "standard compatible %pI4\n", &addr);
+ FMT_NSTD(vty_out(vty, "non-standard %-47.*pHX\n", (int)len, buf));
+
+ When the frr-format plugin is in use, this macro is a no-op since the
+ frr-format plugin supports all printfrr extensions. Since the FRR CI
+ includes a system with the plugin enabled, this means format errors will
+ not slip by undetected even with FMT_NSTD.
+
+.. note::
+ ``printfrr()`` does not support the ``%n`` format.
+
+AS-Safety
+^^^^^^^^^
+
+``printfrr()`` are AS-Safe under the following conditions:
+
+* the ``[v]as[n]printfrr`` variants are not AS-Safe (allocating memory)
+* floating point specifiers are not AS-Safe (system printf is used for these)
+* the positional ``%1$d`` syntax should not be used (8 arguments are supported
+ while AS-Safe)
+* extensions are only AS-Safe if their printer is AS-Safe
+
+printfrr Extensions
+-------------------
+
+``printfrr()`` format strings can be extended with suffixes after `%p` or `%d`.
Printf features like field lengths can be used normally with these extensions,
-e.g. ``%-15pI4`` works correctly.
+e.g. ``%-15pI4`` works correctly, **except if the extension consumes the
+width or precision**. Extensions that do so are listed below as ``%*pXX``
+rather than ``%pXX``.
The extension specifier after ``%p`` or ``%d`` is always an uppercase letter;
by means of established pattern uppercase letters and numbers form the type
You can grep the FRR source for ``printfrr_ext_autoreg`` to see all extended
printers and what exactly they do. More printers are likely to be added as
-needed/useful, so the list above may become outdated.
-
-``%Ld`` is not an "extension" for printfrr; it's wired directly into the main
-printf logic.
+needed/useful, so the list here may be outdated.
.. note::
**not** available when calling ``snprintf`` directly. You need to call
``snprintfrr`` instead.
-AS-Safety
-^^^^^^^^^
+Networking data types
+^^^^^^^^^^^^^^^^^^^^^
-``printfrr()`` are AS-Safe under the following conditions:
+.. role:: frrfmtout(code)
-* the ``[v]as[n]printfrr`` variants are not AS-Safe (allocating memory)
-* floating point specifiers are not AS-Safe (system printf is used for these)
-* the positional ``%1$d`` syntax should not be used (8 arguments are supported
- while AS-Safe)
-* extensions are only AS-Safe if their printer is AS-Safe
+.. frrfmt:: %pI4 (struct in_addr *, in_addr_t *)
+
+ :frrfmtout:`1.2.3.4`
+
+.. frrfmt:: %pI6 (struct in6_addr *)
+
+ :frrfmtout:`fe80::1234`
+
+.. frrfmt:: %pEA (struct ethaddr *)
+
+ :frrfmtout:`01:23:45:67:89:ab`
+
+.. frrfmt:: %pIA (struct ipaddr *)
+
+ :frrfmtout:`1.2.3.4` / :frrfmtout:`fe80::1234`
+
+.. frrfmt:: %pFX (struct prefix *)
+
+ :frrfmtout:`1.2.3.0/24` / :frrfmtout:`fe80::1234/64`
+
+ This accepts the following types:
+
+ - :c:struct:`prefix`
+ - :c:struct:`prefix_ipv4`
+ - :c:struct:`prefix_ipv6`
+ - :c:struct:`prefix_eth`
+ - :c:struct:`prefix_evpn`
+ - :c:struct:`prefix_fs`
+
+ It does **not** accept the following types:
+
+ - :c:struct:`prefix_ls`
+ - :c:struct:`prefix_rd`
+ - :c:struct:`prefix_ptr`
+ - :c:struct:`prefix_sg` (use :frrfmt:`%pSG4`)
+ - :c:union:`prefixptr` (dereference to get :c:struct:`prefix`)
+ - :c:union:`prefixconstptr` (dereference to get :c:struct:`prefix`)
+
+.. frrfmt:: %pSG4 (struct prefix_sg *)
+
+ :frrfmtout:`(*,1.2.3.4)`
+
+ This is *(S,G)* output for use in pimd. (Note prefix_sg is not a prefix
+ "subclass" like the other prefix_* structs.)
+
+.. frrfmt:: %pSU (union sockunion *)
+
+ ``%pSU``: :frrfmtout:`1.2.3.4` / :frrfmtout:`fe80::1234`
+
+ ``%pSUs``: :frrfmtout:`1.2.3.4` / :frrfmtout:`fe80::1234%89`
+ (adds IPv6 scope ID as integer)
+
+ ``%pSUp``: :frrfmtout:`1.2.3.4:567` / :frrfmtout:`[fe80::1234]:567`
+ (adds port)
+
+ ``%pSUps``: :frrfmtout:`1.2.3.4:567` / :frrfmtout:`[fe80::1234%89]:567`
+ (adds port and scope ID)
+
+.. frrfmt:: %pRN (struct route_node *, struct bgp_node *, struct agg_node *)
+
+ :frrfmtout:`192.168.1.0/24` (dst-only node)
+
+ :frrfmtout:`2001:db8::/32 from fe80::/64` (SADR node)
+
+.. frrfmt:: %pNH (struct nexthop *)
+
+ ``%pNHvv``: :frrfmtout:`via 1.2.3.4, eth0` — verbose zebra format
+
+ ``%pNHv``: :frrfmtout:`1.2.3.4, via eth0` — slightly less verbose zebra format
+
+ ``%pNHs``: :frrfmtout:`1.2.3.4 if 15` — same as :c:func:`nexthop2str()`
+
+.. frrfmt:: %pBD (struct bgp_dest *)
+
+ :frrfmtout:`fe80::1234/64`
+
+ (only available in bgpd.)
+
+.. frrfmt:: %dPF (int)
+
+ :frrfmtout:`AF_INET`
+
+ Prints an `AF_*` / `PF_*` constant. ``PF`` is used here to avoid confusion
+ with `AFI` constants, even though the FRR codebase prefers `AF_INET` over
+ `PF_INET` & co.
+
+.. frrfmt:: %dSO (int)
+
+ :frrfmtout:`SOCK_STREAM`
+
+General utility formats
+^^^^^^^^^^^^^^^^^^^^^^^
+
+.. frrfmt:: %m (no argument)
+
+ :frrfmtout:`Permission denied`
+
+ Prints ``strerror(errno)``. Does **not** consume any input argument, don't
+ pass ``errno``!
+
+ (This is a GNU extension not specific to FRR. FRR guarantees it is
+ available on all systems in printfrr, though BSDs support it in printf too.)
+
+.. frrfmt:: %pSQ (char *)
+
+ ([S]tring [Q]uote.) Like ``%s``, but produce a quoted string. Options:
+
+ ``n`` - treat ``NULL`` as empty string instead.
+
+ ``q`` - include ``""`` quotation marks. Note: ``NULL`` is printed as
+ ``(null)``, not ``"(null)"`` unless ``n`` is used too. This is
+ intentional.
+
+ ``s`` - use escaping suitable for RFC5424 syslog. This means ``]`` is
+ escaped too.
+
+ If a length is specified (``%*pSQ`` or ``%.*pSQ``), null bytes in the input
+ string do not end the string and are just printed as ``\x00``.
+
+.. frrfmt:: %pSE (char *)
+
+ ([S]tring [E]scape.) Like ``%s``, but escape special characters.
+ Options:
+
+ ``n`` - treat ``NULL`` as empty string instead.
+
+ Unlike :frrfmt:`%pSQ`, this escapes many more characters that are fine for
+ a quoted string but not on their own.
+
+ If a length is specified (``%*pSE`` or ``%.*pSE``), null bytes in the input
+ string do not end the string and are just printed as ``\x00``.
+
+.. frrfmt:: %pVA (struct va_format *)
+
+ Recursively invoke printfrr, with arguments passed in through:
+
+ .. c:struct:: va_format
+
+ .. c:member:: const char *fmt
+
+ Format string to use for the recursive printfrr call.
+
+ .. c:member:: va_list *va
+
+ Formatting arguments. Note this is passed as a pointer, not - as in
+ most other places - a direct struct reference. Internally uses
+ ``va_copy()`` so repeated calls can be made (e.g. for determining
+ output length.)
+
+.. frrfmt:: %pFB (struct fbuf *)
+
+ Insert text from a ``struct fbuf *``, i.e. the output of a call to
+ :c:func:`bprintfrr()`.
+
+.. frrfmt:: %*pHX (void *, char *, unsigned char *)
+
+ ``%pHX``: :frrfmtout:`12 34 56 78`
+
+ ``%pHXc``: :frrfmtout:`12:34:56:78` (separate with [c]olon)
+
+ ``%pHXn``: :frrfmtout:`12345678` (separate with [n]othing)
+
+ Insert hexdump. This specifier requires a precision or width to be
+ specified. A precision (``%.*pHX``) takes precedence, but generates a
+ compiler warning since precisions are undefined for ``%p`` in ISO C. If
+ no precision is given, the width is used instead (and normal handling of
+ the width is suppressed).
+
+ Note that width and precision are ``int`` arguments, not ``size_t``. Use
+ like::
+
+ char *buf;
+ size_t len;
+
+ snprintfrr(out, sizeof(out), "... %*pHX ...", (int)len, buf);
+
+ /* with padding to width - would generate a warning due to %.*p */
+ FMT_NSTD(snprintfrr(out, sizeof(out), "... %-47.*pHX ...", (int)len, buf));
+
+.. frrfmt:: %*pHS (void *, char *, unsigned char *)
+
+ ``%pHS``: :frrfmtout:`hex.dump`
+
+ This is a complementary format for :frrfmt:`%*pHX` to print the text
+ representation for a hexdump. Non-printable characters are replaced with
+ a dot.
+
+Integer formats
+^^^^^^^^^^^^^^^
+
+.. note::
+
+ These formats currently only exist for advanced type checking with the
+ ``frr-format`` GCC plugin. They should not be used directly since they will
+ cause compiler warnings when used without the plugin. Use with
+ :c:macro:`FMT_NSTD` if necessary.
+
+ It is possible ISO C23 may introduce another format for these, possibly
+ ``%w64d`` discussed in `JTC 1/SC 22/WG 14/N2680 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2680.pdf>`_.
+
+.. frrfmt:: %Lu (uint64_t)
+
+ :frrfmtout:`12345`
+
+.. frrfmt:: %Ld (int64_t)
+
+ :frrfmtout:`-12345`
Log levels
----------
projects / mirror / frr.git / commitdiff