While running MLD conformance test 9.2 core is getting generated.
Test setps:
1. ANVL: Listen (for upto <GeneralQueryRecvWaitTime> seconds) on <AIface-0>.
2. DUT: Send MLD General Query Message.
3. ANVL: Send MLD Report Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of HOST-1
• IPv6 Destination Address field set to <McastAddrGroup>
• MLD Multicast Address field set to <McastAddrGroup>.
4. ANVL: Wait for <ProcessTime> seconds for DUT to process and add <Mcas- tAddrGroup> to its Multicast Address list.
5. ANVL: Send MLD General Query Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of RTR-1 which is numerically less than the link-local IPv6 unicast address of <DIface-0>
• IPv6 Destination Address field set to link-scope all-nodes multicast address.
6. ANVL: Send MLD Multicast-Address-Specific Query Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of RTR-1
• IPv6 Destination Address field set to <McastAddrGroup>
• MLD Multicast Address field set to <McastAddrGroup>
• MLD Maximum Response Delay field value set to 0.
7. ANVL: Verify that the Maximum Response Delay timer for <McastAd- drGroup> is set to zero.
While running above test, when group specific query is received we start gm_t_sg_expire timer.
Once this timer expires, we clear the corresponding entry.
During this sg->state was still set to JOIN. This happened because receiver went down without sending leave.
Added a condition to update the sg->state before starting the timer.
If receiver goes down without sending leave we will update sg->state to GM_SG_JOIN_EXPIRING or GM_SG_NOPRUNE_EXPIRING based on previous state.
If we receive a join then sg->state will be refreshed and will be updated to JOIN state.
Fixes: #13387
Signed-off-by: Abhishek N R <abnr@vmware.com>
(cherry picked from commit
e9484001ee2a1030228de39c997e19f90e32516b)
for (i = 0; i < n_src; i++) {
sg = gm_sg_find(gm_ifp, grp, srcs[i]);
+ GM_UPDATE_SG_STATE(sg);
gm_sg_timer_start(gm_ifp, sg, timers->expire_wait);
}
}
if (PIM_DEBUG_GM_TRACE)
zlog_debug(log_ifp("*,%pPAs expiry timer starting"),
&grp);
+ GM_UPDATE_SG_STATE(sg);
gm_sg_timer_start(gm_ifp, sg, timers->expire_wait);
sg = gm_sgs_next(gm_ifp->sgs, sg);
GM_SG_NOPRUNE_EXPIRING,
};
+/* If the timer gm_t_sg_expire is started without a leave message being received,
+ * the sg->state should be moved to expiring states.
+ * When the timer expires, we do not expect the state to be in join state.
+ * If a JOIN message is received while the timer is running,
+ * the state will be moved to JOIN and this timer will be switched off.
+ * Hence the below state transition is done.
+ */
+#define GM_UPDATE_SG_STATE(sg) \
+ do { \
+ if (sg->state == GM_SG_JOIN) \
+ sg->state = GM_SG_JOIN_EXPIRING; \
+ else if (sg->state == GM_SG_NOPRUNE) \
+ sg->state = GM_SG_NOPRUNE_EXPIRING; \
+ } while (0)
+
static inline bool gm_sg_state_want_join(enum gm_sg_state state)
{
return state != GM_SG_NOINFO && state != GM_SG_PRUNE;