#!/sbin/sh
#
-# Copyright 2001,2003 Sun Microsystems, Inc. All rights reserved.
+# Copyright 2007 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# This file is part of Quagga.
# Starts/stops the given daemon
SMFINCLUDE=/lib/svc/share/smf_include.sh
+ROUTEADMINCLUDE=/lib/svc/share/routing_include.sh
+GLOBAL_OPTIONS="PAfiug"
DAEMON_PATH=@sbindir@
+USER=@enable_user@
+GROUP=@enable_group@
+# handle upgrade of daemon-args SMF property to new routeadm properties
+# used during upgrade too by routeadm.
+# relevant to S10U4+ only.
+handle_routeadm_upgrade () {
+ GLOBAL_OPTIONS="PAfiug"
+
+ daemon_args=`get_daemon_args $SMF_FMRI`
+
+ if [ -n "$daemon_args" ]; then
+ set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
+ "$GLOBAL_OPTIONS" "P" vty_port 0
+ set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
+ "$GLOBAL_OPTIONS" "A" vty_address
+ set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
+ "$GLOBAL_OPTIONS" "f" config_file
+ set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
+ "$GLOBAL_OPTIONS" "i" pid_file
+ set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
+ "$GLOBAL_OPTIONS" "u" user
+ set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
+ "$GLOBAL_OPTIONS" "g" group
+
+ case "$1" in
+ zebra)
+ set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
+ "${GLOBAL_OPTIONS}b" "b" batch true false
+ ;;
+ ripd|ripngd)
+ set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
+ "${GLOBAL_OPTIONS}r" "r" retain true false
+ ;;
+ bgpd)
+ set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
+ "${GLOBAL_OPTIONS}rnp" "r" retain true false
+ set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
+ "${GLOBAL_OPTIONS}rnp" "n" no_kernel true false
+ set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
+ "${GLOBAL_OPTIONS}rnp" "p" bgp_port
+ esac
+ clear_daemon_args $SMF_FMRI
+ fi
+}
+
+upgrade_config () {
+ DAEMON=$1
+ # handle upgrade of SUNWzebra to Quagga
+ if [ -d "/etc/quagga" -a ! -f "/etc/quagga/${DAEMON}.conf" ] ; then
+ if [ -f "/etc/sfw/zebra/${DAEMON}.conf" ] ; then
+ cp "/etc/sfw/zebra/${DAEMON}.conf" \
+ "/etc/quagga/${DAEMON}.conf.upgrade" \
+ || exit $SMF_EXIT_ERR_FATAL
+ chown "${USER}:${GROUP}" "/etc/quagga/${DAEMON}.conf.upgrade" \
+ || exit $SMF_EXIT_ERR_FATAL
+ chmod 0600 "/etc/quagga/${DAEMON}.conf.upgrade" \
+ || exit $SMF_EXIT_ERR_FATAL
+ mv "/etc/quagga/${DAEMON}.conf.upgrade" "/etc/quagga/${DAEMON}.conf" \
+ || exit $SMF_EXIT_ERR_FATAL
+ fi
+ fi
+
+ if [ ! -f "/etc/quagga/${DAEMON}.conf" ] ; then
+ touch "/etc/quagga/${DAEMON}.conf.new" \
+ || exit $SMF_EXIT_ERR_FATAL
+ chown "${USER}:${GROUP}" "/etc/quagga/${DAEMON}.conf.new" \
+ || exit $SMF_EXIT_ERR_FATAL
+ chmod 0600 "/etc/quagga/${DAEMON}.conf.new" \
+ || exit $SMF_EXIT_ERR_FATAL
+ mv "/etc/quagga/${DAEMON}.conf.new" "/etc/quagga/${DAEMON}.conf" \
+ || exit $SMF_EXIT_ERR_FATAL
+ fi
+}
+
+# Relevant to S10+
quagga_is_globalzone () {
- if [ "${QUAGGA_INIT_ZONENAME:=`/sbin/zonename`}" != "global" ]; then
- return 1
- else
+ if [ "${QUAGGA_INIT_ZONENAME:=`/sbin/zonename`}" = "global" \
+ -o `/sbin/zonename -t` = "exclusive" ]; then
return 0
+ else
+ return 1
+ fi
+}
+
+routeadm_daemon_args () {
+ # globals
+ args="`get_daemon_option_from_property $SMF_FMRI config_file f`"
+ args="${args} `get_daemon_option_from_property $SMF_FMRI vty_port P`"
+ args="${args} `get_daemon_option_from_property $SMF_FMRI vty_address A`"
+ args="${args} `get_daemon_option_from_property $SMF_FMRI pid_file i`"
+
+ # user and group we need for config file upgrade..
+ SMF_USER=`get_routeadm_property $SMF_FMRI user`
+ SMF_GROUP=`get_routeadm_property()$SMF_FMRI group`
+ if [ "${SMF_USER}" ] ; then
+ USER="${SMF_USER}"
+ args="${args} -u ${SMF_USER}"
+ fi
+ if [ "${SMF_GROUP}" ] ; then
+ GROUP="${SMF_GROUP}"
+ args="${args} -g ${SMF_GROUP}"
+ fi
+
+ case $1 in
+ zebra)
+ args="${args} `get_daemon_option_from_boolean_property $SMF_FMRI batch -b true`"
+ ;;
+ ripd|ripngd)
+ args="${args} `get_daemon_option_from_boolean_property $SMF_FMRI retain -r true`"
+ ;;
+ bgpd)
+ args="${args} `get_daemon_option_from_boolean_property $SMF_FMRI retain -r true`"
+ args="${args} `get_daemon_option_from_boolean_property $SMF_FMRI no_kernel -n true`"
+ args="${args} `get_daemon_option_from_property $SMF_FMRI bgp_port p 179`"
+ ;;
+ esac
+ echo ${args}
+}
+
+# certain daemons need zebra
+routeadm_zebra_enable () {
+
+ if [ "$DAEMON" = "zebra" ]; then
+ return
+ fi
+
+ enable_zebra=`/usr/bin/svcprop -p \
+ routing/enable_zebra $SMF_FMRI 2> /dev/null`
+ if [ "$enable_zebra" != "false" ]; then
+ zenabled=`/usr/bin/svcprop -p general/enabled zebra:quagga`
+ zenabledt=`/usr/bin/svcprop -p general_ovr/enabled zebra:quagga`
+ if [ "$zenabled" = "true" -o "$zenabledt" = "true" ]; then
+ /usr/sbin/svcadm disable zebra:quagga
+ /usr/sbin/svcadm enable -st zebra:quagga
+ else
+ /usr/sbin/svcadm enable -st zebra:quagga
+ fi
+ if [ "$?" != "0" ]; then
+ echo "Could not enable zebra:quagga"
+ exit $SMF_EXIT_ERR_FATAL
+ fi
fi
}
# there is no SMF. Should allow this script to work pre-S10.
if [ -f "$SMFINCLUDE" ] ; then
. "$SMFINCLUDE";
+
+ # source the SMF-routeadm include if present..
+ if [ -f "$ROUTEADMINCLUDE" ] ; then
+ . "$ROUTEADMINCLUDE"
+ fi
else
# pre-SMF system, fake up any functions and exit codes
# which SMFINCLUDE usually provides.
usage () {
if smf_present ; then
- echo "Usage: $0 <daemon> <daemon arguments>";
+ echo "Usage: $0 <daemon>";
else
echo "Usage: $0 <stop|start> <daemon> <daemon arguments>";
fi
case $1 in
'help' | 'usage')
usage
- exit SMF_EXIT_OK
+ exit $SMF_EXIT_OK
;;
esac
fi
DAEMON="$1"
-shift
-DAEMON_ARGS="$@"
# daemon path must be given
if [ -z "$DAEMON_PATH/$DAEMON" ]; then
# only bgpd is suitable for running in a non-global zone, at this
# time.
case "${DAEMON}" in
- zebra)
- quagga_is_globalzone || exit $SMF_EXIT_OK
- ;;
bgpd)
;;
- ospfd | ospf6d | ripd | ripngd )
+ zebra | ospfd | ospf6d | ripd | ripngd )
quagga_is_globalzone || exit $SMF_EXIT_OK
;;
*)
;;
esac
+# Older Quagga SMF packages pass daemon args on the commandline
+# Newer SMF routeadm model uses properties for each argument
+# so we must handle that.
+if [ smf_present -a -f "$ROUTEADMINCLUDE" ]; then
+ handle_routeadm_upgrade $DAEMON;
+ DAEMON_ARGS=`routeadm_daemon_args`;
+ routeadm_zebra_enable $DAEMON;
+else
+ if [ $# -gt 0 ] ; then
+ shift
+ DAEMON_ARGS="$@"
+ fi
+fi
+
+upgrade_config "$DAEMON"
+
+if [ ! -f "@sysconfdir@/${DAEMON}.conf" ] ; then
+ echo "Could not find config file, @sysconfdir@/${DAEMON}.conf"
+ exit $SMF_EXIT_ERR_CONFIG
+fi
+
# we need @quagga_statedir@ to exist, it probably is on tmpfs.
if [ ! -d @quagga_statedir@ ] ; then
mkdir -p @quagga_statedir@
PIDFILE="@quagga_statedir@/${DAEMON}.pid"
start () {
- $DAEMON_PATH/$DAEMON $DAEMON_ARGS --pid_file ${PIDFILE} &
+ if [ ! -x "$DAEMON_PATH/$DAEMON" ] ; then
+ echo "Error, could not find daemon, $DAEMON_PATH/$DAEMON"
+ exit $SMF_EXIT_ERR_FATAL
+ fi
+ eval exec $DAEMON_PATH/$DAEMON $DAEMON_ARGS --pid_file ${PIDFILE} &
}
stop () {
*)
usage
- exit SMF_EXIT_ERR_FATAL
+ exit $SMF_EXIT_ERR_FATAL
;;
esac
Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.
- Copyright 2005 Sun Microsystems, Inc. All rights reserved.
+ Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
ident "@(#)quagga.xml 1.0 05/03/15 SMI"
-->
-<service_bundle type='manifest' name='QUAGGAdaemons:quagga'>
+<service_bundle type='manifest' name='SUNWquagga-daemons:quagga'>
+
<service
name='network/routing/zebra'
type='service'
version='1'>
-
+
+ <single_instance />
<instance name='quagga' enabled='false'>
<dependency name='fs'
type='service'>
<service_fmri value='svc:/network/initial' />
</dependency>
-
- <dependency name='config_data'
+
+ <!-- do not not run unless routing-setup has run -->
+ <dependency
+ name='network_routing_setup'
grouping='require_all'
- restart_on='restart'
- type='path'>
- <service_fmri
- value='file://localhost/@sysconfdir@/zebra.conf' />
+ restart_on='refresh'
+ type='service'>
+ <service_fmri value='svc:/network/routing-setup' />
</dependency>
-
+
<exec_method
type='method'
name='start'
- exec='/lib/svc/method/quagga zebra %{routing/daemon-args}'
+ exec='/lib/svc/method/quagga zebra'
timeout_seconds='60'>
<method_context>
<method_credential
- user='root' group='root'
- privileges='basic,net_icmpaccess,net_rawaccess,sys_admin,sys_net_config'/>
+ user='root' group='root'/>
</method_context>
</exec_method>
<propval name='ignore_error'
type='astring' value='core,signal' />
</property_group>
-
+
+ <!-- Properties in this group are used by routeadm (1M) -->
+ <property_group name='routeadm' type='application'>
+ <stability value='Unstable' />
+ <!-- Identifies service as a routing service -->
+ <propval name='daemon' type='astring'
+ value='@sbindir@/zebra' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.value.routing' />
+ <!-- zebra should not contribute to ipv4/ipv6 routing state -->
+ <propval name='protocol' type='astring' value='zebra' />
+ </property_group>
+
+ <!-- Properties in this group are modifiable via routeadm (1M) -->
<property_group name='routing' type='application'>
+ <stability value='Evolving' />
<propval name='value_authorization' type='astring'
- value='solaris.smf.modify.routing' />
- <propval name='daemon-args' type='astring' value='-P 0'/>
+ value='solaris.smf.value.routing' />
+
+ <!-- Options common to Quagga daemons
+ Property names are equivalent to the long
+ option name, consult Quagga documentation -->
+ <!-- The config file to use, if not the default -->
+ <propval name='config_file' type='astring' value=''/>
+ <!-- The vty_port to listen on if not the default.
+ 0 to disable -->
+ <propval name='vty_port' type='integer' value='0' />
+ <!-- The address to bind the VTY interface to, if not any. -->
+ <propval name='vty_address' type='astring' value='' />
+ <!-- The user to switch to after startup, if not the default -->
+ <propval name='user' type='astring' value='' />
+ <!-- The group to switch to, if not the default.
+ If user is specified, this defaults to a group with
+ same name as user -->
+ <propval name='group' type='astring' value='' />
+ <!-- The pidfile to use, if not the default of
+ @quagga_statedir@ -->
+ <propval name='pid_file' type='astring' value='' />
+
+ <!-- Options specific to zebra -->
+ <propval name='batch' type='boolean' value='false' />
</property_group>
<property_group name='general' type='framework'>
<!-- to start stop routing services -->
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.routing' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.manage.routing' />
</property_group>
<template>
</documentation>
</template>
</instance>
- <stability value='Evolving' />
+ <stability value='Unstable' />
</service>
<service
value='svc:/system/filesystem/usr:default' />
</dependency>
- <!-- Depends on Work-In-Progress, not yet in SNV
- <dependency name='net'
- grouping='require_all'
- restart_on='none'
+ <dependency
+ name='ipv4-forwarding'
+ grouping='optional_all'
+ restart_on='refresh'
type='service'>
- <service_fmri value='svc:/network/routing/ipv4-routing' />
+ <service_fmri value='svc:/network/ipv4-forwarding' />
</dependency>
- -->
- <dependency name='zebra'
- grouping='require_all'
- restart_on='restart'
- type='service'>
- <service_fmri value='svc:/network/routing/zebra:quagga' />
- </dependency>
-
- <dependency name='config_data'
+ <!-- do not not run unless routing-setup has run -->
+ <dependency
+ name='network_routing_setup'
grouping='require_all'
- restart_on='restart'
- type='path'>
- <service_fmri
- value='file://localhost/@sysconfdir@/ripd.conf' />
+ restart_on='refresh'
+ type='service'>
+ <service_fmri value='svc:/network/routing-setup' />
</dependency>
+ <!-- ensure that restart of zebra is propogated to daemon -->
+ <dependency
+ name='zebra'
+ grouping='optional_all'
+ restart_on='restart'
+ type='service'>
+ <service_fmri value='svc:/network/routing/zebra:quagga' />
+ </dependency>
+
<exec_method
type='method'
name='start'
- exec='/lib/svc/method/quagga ripd %{routing/daemon-args}'
+ exec='/lib/svc/method/quagga ripd'
timeout_seconds='60'>
<method_context>
<method_credential
- user='root' group='root'
- privileges='basic,net_icmpaccess,net_privaddr,net_rawaccess'/>
+ user='root' group='root'/>
</method_context>
</exec_method>
type='astring' value='core,signal' />
</property_group>
+ <!-- Properties in this group are used by routeadm (1M) -->
+ <property_group name='routeadm' type='application'>
+ <stability value='Unstable' />
+ <!-- Identifies service as a routing service -->
+ <propval name='daemon' type='astring'
+ value='@sbindir@/ripd' />
+ <propval name='legacy-daemon' type='astring'
+ value='/usr/sfw/sbin/ripdstart' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.value.routing' />
+ <propval name='protocol' type='astring' value='ipv4' />
+ </property_group>
+
+ <!-- Properties in this group are modifiable via routeadm (1M) -->
<property_group name='routing' type='application'>
<propval name='value_authorization' type='astring'
- value='solaris.smf.modify.routing' />
- <propval name='daemon-args' type='astring' value='-P 0'/>
+ value='solaris.smf.value.routing' />
+
+ <!-- Options common to Quagga daemons -->
+ <!-- The config file to use, if not the default -->
+ <propval name='config_file' type='astring' value=''/>
+ <!-- The vty_port to listen on if not the default.
+ 0 to disable -->
+ <propval name='vty_port' type='integer' value='0' />
+ <!-- The address to bind the VTY interface to, if not any. -->
+ <propval name='vty_address' type='astring' value='' />
+ <!-- The user to switch to after startup, if not the default -->
+ <propval name='user' type='astring' value='' />
+ <!-- The group to switch to, if not the default.
+ If user is specified, this defaults to a group with
+ same name as user -->
+ <propval name='group' type='astring' value='' />
+ <!-- The pidfile to use, if not the default of
+ @quagga_statedir@ -->
+ <propval name='pid_file' type='astring' value='' />
+
+ <!-- Options specific to ripd -->
+ <propval name='retain' type='boolean' value='false' />
</property_group>
<property_group name='general' type='framework'>
<!-- to start stop routing services -->
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.routing' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.manage.routing' />
</property_group>
<template>
</documentation>
</template>
</instance>
- <stability value='Evolving' />
+ <stability value='Unstable' />
</service>
<service
value='svc:/system/filesystem/usr:default' />
</dependency>
- <!-- Depends on WIP, not yet in SNV
- <dependency name='net'
- grouping='require_all'
- restart_on='none'
+ <dependency
+ name='ipv6-forwarding'
+ grouping='optional_all'
+ restart_on='refresh'
type='service'>
- <service_fmri value='svc:/network/routing/ipv6-routing' />
+ <service_fmri value='svc:/network/ipv6-forwarding' />
</dependency>
- -->
- <dependency name='zebra'
- grouping='require_all'
- restart_on='restart'
- type='service'>
- <service_fmri value='svc:/network/routing/zebra:quagga' />
+ <!-- do not not run unless routing-setup has run -->
+ <dependency
+ name='network_routing_setup'
+ grouping='require_all'
+ restart_on='refresh'
+ type='service'>
+ <service_fmri value='svc:/network/routing-setup' />
</dependency>
- <dependency name='config_data'
- grouping='require_all'
+ <!-- ensure that restart of zebra is propogated to daemon -->
+ <dependency
+ name='zebra'
+ grouping='optional_all'
restart_on='restart'
- type='path'>
- <service_fmri
- value='file://localhost/@sysconfdir@/ripngd.conf' />
+ type='service'>
+ <service_fmri value='svc:/network/routing/zebra:quagga' />
</dependency>
-
+
<exec_method
type='method'
name='start'
- exec='/lib/svc/method/quagga ripngd %{routing/daemon-args}'
+ exec='/lib/svc/method/quagga ripngd'
timeout_seconds='60'>
<method_context>
<method_credential
- user='root' group='root'
- privileges='basic,net_icmpaccess,net_privaddr,net_rawaccess'/>
+ user='root' group='root'/>
</method_context>
</exec_method>
type='astring' value='core,signal' />
</property_group>
+ <!-- Properties in this group are used by routeadm (1M) -->
+ <property_group name='routeadm' type='application'>
+ <stability value='Unstable' />
+ <!-- Identifies service as a routing service -->
+ <propval name='daemon' type='astring'
+ value='@sbindir@/ripngd' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.value.routing' />
+ <propval name='protocol' type='astring' value='ipv6'/>
+ </property_group>
+
+ <!-- Properties in this group are modifiable via routeadm (1M) -->
<property_group name='routing' type='application'>
<propval name='value_authorization' type='astring'
- value='solaris.smf.modify.routing' />
- <propval name='daemon-args' type='astring' value='-P 0'/>
+ value='solaris.smf.value.routing' />
+
+ <!-- Options common to Quagga daemons -->
+ <!-- The config file to use, if not the default -->
+ <propval name='config_file' type='astring' value=''/>
+ <!-- The vty_port to listen on if not the default.
+ 0 to disable -->
+ <propval name='vty_port' type='integer' value='0' />
+ <!-- The address to bind the VTY interface to, if not any. -->
+ <propval name='vty_address' type='astring' value='' />
+ <!-- The user to switch to after startup, if not the default -->
+ <propval name='user' type='astring' value='' />
+ <!-- The group to switch to, if not the default.
+ If user is specified, this defaults to a group with
+ same name as user -->
+ <propval name='group' type='astring' value='' />
+ <!-- The pidfile to use, if not the default of
+ @quagga_statedir@ -->
+ <propval name='pid_file' type='astring' value='' />
+
+ <!-- Options specific to ripngd -->
+ <propval name='retain' type='boolean' value='false' />
</property_group>
<property_group name='general' type='framework'>
<!-- to start stop routing services -->
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.routing' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.manage.routing' />
</property_group>
<template>
</documentation>
</template>
</instance>
- <stability value='Evolving' />
+ <stability value='Unstable' />
</service>
<service
value='svc:/system/filesystem/usr:default' />
</dependency>
- <!-- Depends on WIP, not yet in SNV
- <dependency name='net'
- grouping='require_all'
- restart_on='none'
+ <dependency
+ name='ipv4-forwarding'
+ grouping='optional_all'
+ restart_on='refresh'
type='service'>
- <service_fmri value='svc:/network/routing/ipv4-routing' />
+ <service_fmri value='svc:/network/ipv4-forwarding' />
</dependency>
- -->
- <dependency name='zebra'
- grouping='require_all'
- restart_on='restart'
- type='service'>
- <service_fmri value='svc:/network/routing/zebra:quagga' />
+ <!-- do not not run unless routing-setup has run -->
+ <dependency
+ name='network_routing_setup'
+ grouping='require_all'
+ restart_on='refresh'
+ type='service'>
+ <service_fmri value='svc:/network/routing-setup' />
</dependency>
- <dependency name='config_data'
- grouping='require_all'
+ <!-- ensure that restart of zebra is propogated to daemon -->
+ <dependency
+ name='zebra'
+ grouping='optional_all'
restart_on='restart'
- type='path'>
- <service_fmri
- value='file://localhost/@sysconfdir@/ospfd.conf' />
+ type='service'>
+ <service_fmri value='svc:/network/routing/zebra:quagga' />
</dependency>
-
+
<exec_method
type='method'
name='start'
- exec='/lib/svc/method/quagga ospfd %{routing/daemon-args}'
+ exec='/lib/svc/method/quagga ospfd'
timeout_seconds='60'>
<method_context>
<method_credential
- user='root' group='root'
- privileges='basic,net_icmpaccess,net_privaddr,net_rawaccess,sys_net_config'/>
+ user='root' group='root'/>
</method_context>
</exec_method>
+ <!-- ospfd can take a long time to shutdown, due to graceful
+ shutdown
+ -->
<exec_method
type='method'
name='stop'
exec=':kill'
- timeout_seconds='60'>
+ timeout_seconds='600'>
</exec_method>
<property_group name='startd'
type='astring' value='core,signal' />
</property_group>
+ <!-- Properties in this group are used by routeadm (1M) -->
+ <property_group name='routeadm' type='application'>
+ <stability value='Unstable' />
+ <!-- Identifies service as a routing service -->
+ <propval name='daemon' type='astring'
+ value='@sbindir@/ospfd' />
+ <propval name='legacy-daemon' type='astring'
+ value='/usr/sfw/sbin/ospfdstart' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.value.routing' />
+ <propval name='protocol' type='astring' value='ipv4'/>
+ </property_group>
+
+ <!-- Properties in this group are modifiable via routeadm (1M) -->
<property_group name='routing' type='application'>
<propval name='value_authorization' type='astring'
- value='solaris.smf.modify.routing' />
- <propval name='daemon-args' type='astring' value='-P 0'/>
+ value='solaris.smf.value.routing' />
+
+ <!-- Options common to Quagga daemons -->
+ <!-- The config file to use, if not the default -->
+ <propval name='config_file' type='astring' value=''/>
+ <!-- The vty_port to listen on if not the default.
+ 0 to disable -->
+ <propval name='vty_port' type='integer' value='0' />
+ <!-- The address to bind the VTY interface to, if not any. -->
+ <propval name='vty_address' type='astring' value='' />
+ <!-- The user to switch to after startup, if not the default -->
+ <propval name='user' type='astring' value='' />
+ <!-- The group to switch to, if not the default.
+ If user is specified, this defaults to a group with
+ same name as user -->
+ <propval name='group' type='astring' value='' />
+ <!-- The pidfile to use, if not the default of
+ @quagga_statedir@ -->
+ <propval name='pid_file' type='astring' value='' />
</property_group>
<property_group name='general' type='framework'>
<!-- to start stop routing services -->
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.routing' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.manage.routing' />
</property_group>
<template>
</documentation>
</template>
</instance>
- <stability value='Evolving' />
+ <stability value='Unstable' />
</service>
<service
value='svc:/system/filesystem/usr:default' />
</dependency>
- <!-- Depends on WIP, not yet in SNV
- <dependency name='net'
- grouping='require_all'
- restart_on='none'
+ <dependency
+ name='ipv6-forwarding'
+ grouping='optional_all'
+ restart_on='refresh'
type='service'>
- <service_fmri value='svc:/network/routing/ipv6-routing' />
+ <service_fmri value='svc:/network/ipv6-forwarding' />
</dependency>
- -->
- <dependency name='zebra'
- grouping='require_all'
- restart_on='restart'
- type='service'>
- <service_fmri value='svc:/network/routing/zebra:quagga' />
+ <!-- do not not run unless routing-setup has run -->
+ <dependency
+ name='network_routing_setup'
+ grouping='require_all'
+ restart_on='refresh'
+ type='service'>
+ <service_fmri value='svc:/network/routing-setup' />
</dependency>
- <dependency name='config_data'
- grouping='require_all'
+ <!-- ensure that restart of zebra is propogated to daemon -->
+ <dependency
+ name='zebra'
+ grouping='optional_all'
restart_on='restart'
- type='path'>
- <service_fmri
- value='file://localhost/@sysconfdir@/ospf6d.conf' />
+ type='service'>
+ <service_fmri value='svc:/network/routing/zebra:quagga' />
</dependency>
-
+
<exec_method
type='method'
name='start'
- exec='/lib/svc/method/quagga ospf6d %{routing/daemon-args}'
+ exec='/lib/svc/method/quagga ospf6d'
timeout_seconds='60'>
<method_context>
<method_credential
- user='root' group='root'
- privileges='basic,net_icmpaccess,net_privaddr,net_rawaccess'/>
+ user='root' group='root'/>
</method_context>
</exec_method>
type='astring' value='core,signal' />
</property_group>
+ <!-- Properties in this group are used by routeadm (1M) -->
+ <property_group name='routeadm' type='application'>
+ <stability value='Unstable' />
+ <!-- Identifies service as a routing service -->
+ <propval name='daemon' type='astring'
+ value='@sbindir@/ospf6d' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.value.routing' />
+ <propval name='protocol' type='astring' value='ipv6'/>
+ </property_group>
+
+ <!-- Properties in this group are modifiable via routeadm (1M) -->
<property_group name='routing' type='application'>
<propval name='value_authorization' type='astring'
- value='solaris.smf.modify.routing' />
- <propval name='daemon-args' type='astring' value='-P 0'/>
+ value='solaris.smf.value.routing' />
+
+ <!-- Options common to Quagga daemons -->
+ <!-- The config file to use, if not the default -->
+ <propval name='config_file' type='astring' value=''/>
+ <!-- The vty_port to listen on if not the default.
+ 0 to disable -->
+ <propval name='vty_port' type='integer' value='0' />
+ <!-- The address to bind the VTY interface to, if not any. -->
+ <propval name='vty_address' type='astring' value='' />
+ <!-- The user to switch to after startup, if not the default -->
+ <propval name='user' type='astring' value='' />
+ <!-- The group to switch to, if not the default.
+ If user is specified, this defaults to a group with
+ same name as user -->
+ <propval name='group' type='astring' value='' />
+ <!-- The pidfile to use, if not the default of
+ @quagga_statedir@ -->
+ <propval name='pid_file' type='astring' value='' />
</property_group>
<property_group name='general' type='framework'>
<!-- to start stop routing services -->
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.routing' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.manage.routing' />
</property_group>
<template>
<common_name>
<loctext xml:lang='C'>
- Quagga: ospf6d, OSPFv3 IPv6 routing protocol daemon.
+ Quagga: ospf6d, OSPFv3 IPv6 routing protocol daemon.
</loctext>
</common_name>
<documentation>
</documentation>
</template>
</instance>
- <stability value='Evolving' />
+ <stability value='Unstable' />
</service>
value='svc:/system/filesystem/usr:default' />
</dependency>
- <!-- Depends on WIP, not yet in SNV
- <dependency name='net'
- grouping='require_any'
- restart_on='none'
+ <dependency
+ name='ipv6-forwarding'
+ grouping='optional_all'
+ restart_on='refresh'
type='service'>
- <service_fmri value='svc:/network/routing/ipv6-routing' />
- <service_fmri value='svc:/network/routing/ipv4-routing' />
+ <service_fmri value='svc:/network/ipv6-forwarding' />
+ </dependency>
+
+ <dependency
+ name='ipv4-forwarding'
+ grouping='optional_all'
+ restart_on='refresh'
+ type='service'>
+ <service_fmri value='svc:/network/ipv4-forwarding' />
</dependency>
- -->
- <dependency name='zebra'
- grouping='optional_all'
- restart_on='restart'
- type='service'>
- <service_fmri value='svc:/network/routing/zebra:quagga' />
+ <!-- do not not run unless routing-setup has run -->
+ <dependency
+ name='network_routing_setup'
+ grouping='require_all'
+ restart_on='refresh'
+ type='service'>
+ <service_fmri value='svc:/network/routing-setup' />
</dependency>
- <dependency name='config_data'
- grouping='require_all'
+ <!-- ensure that restart of zebra is propogated to daemon -->
+ <dependency
+ name='zebra'
+ grouping='optional_all'
restart_on='restart'
- type='path'>
- <service_fmri
- value='file://localhost/@sysconfdir@/bgpd.conf' />
+ type='service'>
+ <service_fmri value='svc:/network/routing/zebra:quagga' />
</dependency>
-
+
<exec_method
type='method'
name='start'
- exec='/lib/svc/method/quagga bgpd %{routing/daemon-args}'
+ exec='/lib/svc/method/quagga bgpd'
timeout_seconds='60'>
<method_context>
<method_credential
- user='root' group='root'
- privileges='basic,net_icmpaccess,net_privaddr,net_rawaccess'/>
+ user='root' group='root'/>
</method_context>
</exec_method>
type='astring' value='core,signal' />
</property_group>
+ <!-- Properties in this group are used by routeadm (1M) -->
+ <property_group name='routeadm' type='application'>
+ <stability value='Unstable' />
+ <!-- Identifies service as a routing service -->
+ <propval name='daemon' type='astring'
+ value='@sbindir@/bgpd' />
+ <propval name='legacy-daemon' type='astring'
+ value='/usr/sfw/sbin/bgpdstart' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.value.routing' />
+ <property name='protocol' type='astring'>
+ <astring_list>
+ <value_node value='ipv4'/>
+ <value_node value='ipv6'/>
+ </astring_list>
+ </property>
+ </property_group>
+
+ <!-- Properties in this group are modifiable via routeadm (1M) -->
<property_group name='routing' type='application'>
<propval name='value_authorization' type='astring'
- value='solaris.smf.modify.routing' />
- <propval name='daemon-args' type='astring' value='-P 0'/>
+ value='solaris.smf.value.routing' />
+
+ <!-- Options common to Quagga daemons. -->
+ <!-- The config file to use, if not the default -->
+ <propval name='config_file' type='astring' value=''/>
+ <!-- The vty_port to listen on if not the default.
+ 0 to disable -->
+ <propval name='vty_port' type='integer' value='0' />
+ <!-- The address to bind the VTY interface to, if not any. -->
+ <propval name='vty_address' type='astring' value='' />
+ <!-- The user to switch to after startup, if not the default -->
+ <propval name='user' type='astring' value='' />
+ <!-- The group to switch to, if not the default.
+ If user is specified, this defaults to a group with
+ same name as user -->
+ <propval name='group' type='astring' value='' />
+ <!-- The pidfile to use, if not the default of
+ @quagga_statedir@ -->
+ <propval name='pid_file' type='astring' value='' />
+
+ <!-- Options specific to bgpd -->
+ <propval name='retain' type='boolean' value='false' />
+ <propval name='no_kernel' type='boolean' value='false' />
+ <propval name='bgp_port' type='astring' value='' />
+
+ <!--
+ If enable_zebra is false, it will not be switched
+ on by the start method.
+ -->
+ <propval name='enable_zebra' type='boolean' value='true' />
</property_group>
<property_group name='general' type='framework'>
<!-- to start stop routing services -->
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.routing' />
+ <propval name='value_authorization' type='astring'
+ value='solaris.smf.manage.routing' />
</property_group>
<template>
</documentation>
</template>
</instance>
- <stability value='Evolving' />
+ <stability value='Unstable' />
</service>
</service_bundle>
projects / mirror / frr.git / commitdiff