The bgp gr topotests had run times that were greater than 10 minutes each.
Just brute force break up the tests to 4 different sub parts.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Gracefull Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 2 routers topology, r1, r2 in IBGP
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Garceful Restart on both the routers.
+
+1. Transition from Peer-level helper to Global Restarting
+2. Transition from Peer-level helper to Global inherit helper
+3. Transition from Peer-level restarting to Global inherit helper
+4. Default GR functional mode is Helper.
+5. Verify that the restarting node sets "R" bit while sending the
+ BGP open messages after the node restart, only if GR is enabled.
+6. Verify if restarting node resets R bit in BGP open message
+ during normal BGP session flaps as well, even when GR restarting
+ mode is enabled. Here link flap happen due to interface UP/DOWN.
+7. Verify if restarting node resets R bit in BGP
+ open message during normal BGP session flaps when GR is disabled.
+8. Verify that restarting nodes set "F" bit while sending
+ the BGP open messages after it restarts, only when BGP GR is enabled.
+9. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+10. Verify that GR helper routers keeps all the routes received
+ from restarting node if both the routers are configured as
+ GR restarting node.
+11. Verify that GR helper routers delete all the routes
+ received from a node if both the routers are configured as GR
+ helper node.
+12. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+13. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+14. Verify that restarting nodes reset "F" bit while sending
+ the BGP open messages after it's restarts, when BGP GR is **NOT** enabled.
+15. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+16. Transition from Global Restarting to Disable and then Global
+ Disable to Restarting.
+17. Transition from Global Helper to Disable and then Global
+ Disable to Helper.
+18. Transition from Global Restart to Helper and then Global
+ Helper to Restart, Global Mode : GR Restarting
+ PerPeer Mode : GR Helper
+ GR Mode effective : GR Helper
+19. Transition from Peer-level helper to Global Restarting,
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+20. Transition from Peer-level restart to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+21. Transition from Peer-level disabled to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Disabled
+ GR Mode effective : GR Disabled
+22. Peer-level inherit from Global Restarting
+ Global Mode : GR Restart
+ PerPeer Mode : None
+ GR Mode effective : GR Restart
+23. Transition from Peer-level disbale to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : GR Disable
+ GR Mode effective : GR Disable
+
+These tests have been broken up into 4 sub python scripts because
+the totality of this run was fairly significant.
+"""
+
+import os
+import sys
+import time
+import pytest
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ shutdown_bringup_interface,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+NEXT_HOP_IP = {"ipv4": "192.168.1.10", "ipv6": "fd00:0:0:1::10"}
+NEXT_HOP_IP_1 = {"ipv4": "192.168.0.1", "ipv6": "fd00::1"}
+NEXT_HOP_IP_2 = {"ipv4": "192.168.0.2", "ipv6": "fd00::2"}
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 20
+PREFERRED_NEXT_HOP = "link_local"
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ global ADDR_TYPES
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo1.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"]["r2-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(
+ tgen, dut, peer, addr_type, next_hop_dict, preferred_next_hop=PREFERRED_NEXT_HOP
+):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in preferred_next_hop:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def BGP_GR_TC_50_p1(request):
+ """
+ Test Objective : Transition from Peer-level helper to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : Helper
+ GR Mode effective : GR Helper
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step(
+ "Configure R1 as GR helper node at per Peer-level for R2"
+ " and configure R2 as global restarting node."
+ )
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a helper node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Bring up BGP on R2 and remove Peer-level GR config from R1 ")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ step("Verify on R2 that R1 still advertises GR capabilities as a helper node")
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Start BGP on R2")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_51_p1(request):
+ """
+ Test Objective : Transition from Peer-level restarting to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : GR Restart
+ GR Mode effective : GR Restart
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step("Configure R1 as GR restarting node at per Peer-level for R2")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, "r2", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps the stale entries in FIB & R2 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, "r2", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Bring up BGP on R1 and remove Peer-level GR config")
+
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ step("Verify on R2 that R1 advertises GR capabilities as a helper node")
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGPd on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Start BGP on R2")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_53_p1(request):
+ """
+ Test Objective : Default GR functional mode is Helper.
+ Global Mode : None
+ PerPeer Mode : None
+ GR Mode effective : GR Helper
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step("configure R2 as global restarting node")
+
+ input_dict = {"r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}}
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step(
+ "Verify on R2 that R1 advertises GR capabilities as a helper node based on inherit"
+ )
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGPd on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Start BGP on R2")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_4_p0(request):
+ """
+ Test Objective : Verify that the restarting node sets "R" bit while sending the
+ BGP open messages after the node restart, only if GR is enabled.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Helper Mode] initialized "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : R2 goes for reload ")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info(
+ "[Phase 3] : R2 is still down, restart time {} sec."
+ "So time verify the routes are present in BGP RIB and ZEBRA ".format(
+ GR_RESTART_TIMER
+ )
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ logger.info("[Phase 5] : R2 is about to come up now ")
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_5_1_2_p1(request):
+ """
+ Test Objective : Verify if restarting node resets R bit in BGP open message
+ during normal BGP session flaps as well, even when GR restarting mode is enabled.
+ Here link flap happen due to interface UP/DOWN.
+
+ """
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Restart Mode] initialized "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : Now flap the link running the BGP session ")
+ # Shutdown interface
+ intf = "r2-r1-eth0"
+ shutdown_bringup_interface(tgen, "r2", intf)
+
+ # Bring up Interface
+ shutdown_bringup_interface(tgen, "r2", intf, ifaceaction=True)
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : Restart BGPd on router R2. ")
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_6_1_2_p1(request):
+ """
+ Test Objective : Verify if restarting node resets R bit in BGP
+ open message during normal BGP session flaps when GR is disabled.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Phase 1] : Test Setup" "[Restart Mode]R1-----R2[Helper Mode] initialized "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 1] : Changing mode" "[Disable Mode]R1-----R2[Helper Mode]")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ # Verify GR stats
+ input_dict = {
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ # here the verify_graceful_restart fro the neighbor would be
+ # "NotReceived" as the latest GR config is not yet applied.
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : Now flap the link running the BGP session ")
+ # Shutdown interface
+ intf = "r2-r1-eth0"
+ shutdown_bringup_interface(tgen, "r2", intf)
+
+ # Bring up Interface
+ shutdown_bringup_interface(tgen, "r2", intf, ifaceaction=True)
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_r_bit(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r2: R-bit is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ logger.info("Restart BGPd on R2 ")
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_r_bit(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r2: R-bit is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Gracefull Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 2 routers topology, r1, r2 in IBGP
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Garceful Restart on both the routers.
+
+1. Transition from Peer-level helper to Global Restarting
+2. Transition from Peer-level helper to Global inherit helper
+3. Transition from Peer-level restarting to Global inherit helper
+4. Default GR functional mode is Helper.
+5. Verify that the restarting node sets "R" bit while sending the
+ BGP open messages after the node restart, only if GR is enabled.
+6. Verify if restarting node resets R bit in BGP open message
+ during normal BGP session flaps as well, even when GR restarting
+ mode is enabled. Here link flap happen due to interface UP/DOWN.
+7. Verify if restarting node resets R bit in BGP
+ open message during normal BGP session flaps when GR is disabled.
+8. Verify that restarting nodes set "F" bit while sending
+ the BGP open messages after it restarts, only when BGP GR is enabled.
+9. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+10. Verify that GR helper routers keeps all the routes received
+ from restarting node if both the routers are configured as
+ GR restarting node.
+11. Verify that GR helper routers delete all the routes
+ received from a node if both the routers are configured as GR
+ helper node.
+12. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+13. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+14. Verify that restarting nodes reset "F" bit while sending
+ the BGP open messages after it's restarts, when BGP GR is **NOT** enabled.
+15. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+16. Transition from Global Restarting to Disable and then Global
+ Disable to Restarting.
+17. Transition from Global Helper to Disable and then Global
+ Disable to Helper.
+18. Transition from Global Restart to Helper and then Global
+ Helper to Restart, Global Mode : GR Restarting
+ PerPeer Mode : GR Helper
+ GR Mode effective : GR Helper
+19. Transition from Peer-level helper to Global Restarting,
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+20. Transition from Peer-level restart to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+21. Transition from Peer-level disabled to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Disabled
+ GR Mode effective : GR Disabled
+22. Peer-level inherit from Global Restarting
+ Global Mode : GR Restart
+ PerPeer Mode : None
+ GR Mode effective : GR Restart
+23. Transition from Peer-level disbale to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : GR Disable
+ GR Mode effective : GR Disable
+
+These tests have been broken up into 4 sub python scripts because
+the totality of this run was fairly significant.
+"""
+
+import os
+import sys
+import time
+import pytest
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ shutdown_bringup_interface,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+NEXT_HOP_IP = {"ipv4": "192.168.1.10", "ipv6": "fd00:0:0:1::10"}
+NEXT_HOP_IP_1 = {"ipv4": "192.168.0.1", "ipv6": "fd00::1"}
+NEXT_HOP_IP_2 = {"ipv4": "192.168.0.2", "ipv6": "fd00::2"}
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 20
+PREFERRED_NEXT_HOP = "link_local"
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ global ADDR_TYPES
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo1.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"]["r2-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(
+ tgen, dut, peer, addr_type, next_hop_dict, preferred_next_hop=PREFERRED_NEXT_HOP
+):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in preferred_next_hop:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def test_BGP_GR_TC_8_p1(request):
+ """
+ Test Objective : Verify that restarting nodes set "F" bit while sending
+ the BGP open messages after it restarts, only when BGP GR is enabled.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Restart Mode] initialized "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"preserve-fw-state": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : R1 goes for reload ")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Phase 3] : R1 is about to come up now ")
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r2", peer="r1")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_f_bit(tgen, topo, addr_type, input_dict, dut="r2", peer="r1")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Gracefull Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 2 routers topology, r1, r2 in IBGP
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Garceful Restart on both the routers.
+
+1. Transition from Peer-level helper to Global Restarting
+2. Transition from Peer-level helper to Global inherit helper
+3. Transition from Peer-level restarting to Global inherit helper
+4. Default GR functional mode is Helper.
+5. Verify that the restarting node sets "R" bit while sending the
+ BGP open messages after the node restart, only if GR is enabled.
+6. Verify if restarting node resets R bit in BGP open message
+ during normal BGP session flaps as well, even when GR restarting
+ mode is enabled. Here link flap happen due to interface UP/DOWN.
+7. Verify if restarting node resets R bit in BGP
+ open message during normal BGP session flaps when GR is disabled.
+8. Verify that restarting nodes set "F" bit while sending
+ the BGP open messages after it restarts, only when BGP GR is enabled.
+9. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+10. Verify that GR helper routers keeps all the routes received
+ from restarting node if both the routers are configured as
+ GR restarting node.
+11. Verify that GR helper routers delete all the routes
+ received from a node if both the routers are configured as GR
+ helper node.
+12. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+13. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+14. Verify that restarting nodes reset "F" bit while sending
+ the BGP open messages after it's restarts, when BGP GR is **NOT** enabled.
+15. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+16. Transition from Global Restarting to Disable and then Global
+ Disable to Restarting.
+17. Transition from Global Helper to Disable and then Global
+ Disable to Helper.
+18. Transition from Global Restart to Helper and then Global
+ Helper to Restart, Global Mode : GR Restarting
+ PerPeer Mode : GR Helper
+ GR Mode effective : GR Helper
+19. Transition from Peer-level helper to Global Restarting,
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+20. Transition from Peer-level restart to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+21. Transition from Peer-level disabled to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Disabled
+ GR Mode effective : GR Disabled
+22. Peer-level inherit from Global Restarting
+ Global Mode : GR Restart
+ PerPeer Mode : None
+ GR Mode effective : GR Restart
+23. Transition from Peer-level disbale to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : GR Disable
+ GR Mode effective : GR Disable
+
+These tests have been broken up into 4 sub python scripts because
+the totality of this run was fairly significant.
+"""
+
+import os
+import sys
+import time
+import pytest
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ shutdown_bringup_interface,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+NEXT_HOP_IP = {"ipv4": "192.168.1.10", "ipv6": "fd00:0:0:1::10"}
+NEXT_HOP_IP_1 = {"ipv4": "192.168.0.1", "ipv6": "fd00::1"}
+NEXT_HOP_IP_2 = {"ipv4": "192.168.0.2", "ipv6": "fd00::2"}
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 20
+PREFERRED_NEXT_HOP = "link_local"
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ global ADDR_TYPES
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo1.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"]["r2-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(
+ tgen, dut, peer, addr_type, next_hop_dict, preferred_next_hop=PREFERRED_NEXT_HOP
+):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in preferred_next_hop:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def BGP_GR_TC_50_p1(request):
+ """
+ Test Objective : Transition from Peer-level helper to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : Helper
+ GR Mode effective : GR Helper
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step(
+ "Configure R1 as GR helper node at per Peer-level for R2"
+ " and configure R2 as global restarting node."
+ )
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a helper node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Bring up BGP on R2 and remove Peer-level GR config from R1 ")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ step("Verify on R2 that R1 still advertises GR capabilities as a helper node")
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Start BGP on R2")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_19_p1(request):
+ """
+ Test Objective : Verify that GR helper routers keeps all the routes received
+ from restarting node if both the routers are configured as GR restarting node.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info("[Phase 1] : Test Setup [Helper]R1-----R2[Restart] initialized ")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "preserve-fw-state": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info(
+ "[Phase 2] : R1's Gr state cahnge to Graceful"
+ " Restart without resetting the session "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ logger.info(
+ "[Phase 3] : R2 is still down, restart time 120 sec."
+ " So time verify the routes are present in BGP RIB and ZEBRA "
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_20_p1(request):
+ """
+ Test Objective : Verify that GR helper routers delete all the routes
+ received from a node if both the routers are configured as GR helper node.
+ """
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info("[Phase 1] : Test Setup [Helper]R1-----R2[Helper] initialized ")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "preserve-fw-state": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ logger.info("[Phase 5] : R2 is about to come up now ")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_31_1_p1(request):
+ """
+ After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Phase 1] : Test Setup" " [Helper Mode]R2-----R1[Restart Mode] initialized "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"preserve-fw-state": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : R1 Goes from Restart to Disable Mode ")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ # Verify GR stats
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : R1 goes for reload ")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info(
+ "[Phase 3] : R1 is still down, restart time 120 sec."
+ " So time verify the routes are not present in BGP RIB and ZEBRA"
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+
+ logger.info("[Phase 4] : R1 is about to come up now ")
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Phase 5] : R1 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_31_2_p1(request):
+ """
+ After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Phase 1] : Test Setup " "[Disable Mode]R1-----R2[Restart Mode] initialized "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 2] : R2 Goes from Disable to Restart Mode ")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"preserve-fw-state": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ # Verify GR stats
+ input_dict = {
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ # here the verify_graceful_restart fro the neighbor would be
+ # "NotReceived" as the latest GR config is not yet applied.
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 6] : R1 is about to come up now ")
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Phase 4] : R1 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 3] : R1 goes for reload ")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info(
+ "[Phase 4] : R1 is still down, restart time 120 sec."
+ " So time verify the routes are present in BGP RIB and ZEBRA "
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Phase 6] : R1 is about to come up now ")
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Phase 4] : R1 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_9_p1(request):
+ """
+ Test Objective : Verify that restarting nodes reset "F" bit while sending
+ the BGP open messages after it's restarts, when BGP GR is **NOT** enabled.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Helper Mode] Initiliazed "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "graceful-restart": {"preserve-fw-state": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info("[Phase 2] : R2 goes for reload ")
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info(
+ "[Phase 3] : R2 is still down, restart time 120 sec."
+ "So time verify the routes are present in BGP RIB and ZEBRA "
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ logger.info("[Phase 5] : R2 is about to come up now ")
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_bgp_convergence(tgen, topo)
+ assert (
+ result is True
+ ), "BGP Convergence after BGPd restart" " :Failed \n Error:{}".format(result)
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_f_bit(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r1: F-bit is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_17_p1(request):
+ """
+ Test Objective : Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info("[Phase 1] : Test Setup [Disable]R1-----R2[Restart] " "Initiliazed ")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "preserve-fw-state": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info("[Phase 2] : R2 goes for reload ")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info(
+ "[Phase 3] : R2 is still down, restart time 120 sec."
+ " So time verify the routes are present in BGP RIB and ZEBRA "
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ logger.info("[Phase 5] : R2 is about to come up now ")
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_bgp_convergence(tgen, topo)
+ assert (
+ result is True
+ ), "BGP Convergence after BGPd restart" " :Failed \n Error:{}".format(result)
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_r_bit(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r1: R-bit is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_43_p1(request):
+ """
+ Test Objective : Transition from Global Restarting to Disable
+ and then Global Disable to Restarting.
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step("Configure R1 and R2 as GR restarting node in global level")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps BGP routes in zebra and R2 retains"
+ " the stale entry for received routes from R1"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Bring up BGPd on R1 and configure it as GR disabled node in global level")
+
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": False,
+ "graceful-restart-disable": True,
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 doesn't advertise any GR capabilities")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart-disable": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ protocol = "bgp"
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 flush all BGP routes from RIB & FIB and FIB and R2"
+ " does not retain stale entry for received routes from R1"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r2: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ protocol = "bgp"
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step(
+ "Bring up BGPd on R1 and configure it as GR" " restarting node in global level"
+ )
+
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ input_dict = {"r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}}}
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps BGP routes in zebra and R2"
+ " retains the stale entry for received routes from R1"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_44_p1(request):
+ """
+ Test Objective : Transition from Global Helper to Disable
+ and then Global Disable to Helper.
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step(
+ "Configure R2 as GR restating node in global level and"
+ " leave R1 without any GR related config"
+ )
+
+ input_dict = {"r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}}
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a helper node")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart-helper": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step("Verify that R1 keeps stale entry for BGP routes when BGPd on R2 is down")
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Bring up BGPd on R2 and configure R1 as GR disabled node in global level")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart-disable": True,
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 doesn't advertise any GR capabilities")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart-disable": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step("Verify that R1 does not retain stale entry for received routes from R2")
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ next_hop = NEXT_HOP_IP_2[addr_type]
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Bring up BGPd on R2 and remove GR related config from R1 in global level")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart-disable": False}}}
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a helper node")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart-helper": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step("Verify that R1 keeps stale entry for BGP routes when BGPd on R2 is down")
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_45_p1(request):
+ """
+ Test Objective : Transition from Global Restart to Helper
+ and then Global Helper to Restart.
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step("Configure R1 and R2 as GR restarting node in global level")
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps BGP routes in zebra and R2"
+ " retains the stale entry for received routes from R1"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Bring up BGPd on R1 and remove GR related config in global level")
+
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": False,
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a helper node")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart-helper": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step("Verify that R1 keeps stale entry for BGP routes when BGPd on R2 is down")
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Bring up BGPd on R2 and configure R1 as GR restarting node in global level")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps BGP routes in zebra and R2"
+ " retains the stale entry for received routes from R1"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Gracefull Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 2 routers topology, r1, r2 in IBGP
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Garceful Restart on both the routers.
+
+1. Transition from Peer-level helper to Global Restarting
+2. Transition from Peer-level helper to Global inherit helper
+3. Transition from Peer-level restarting to Global inherit helper
+4. Default GR functional mode is Helper.
+5. Verify that the restarting node sets "R" bit while sending the
+ BGP open messages after the node restart, only if GR is enabled.
+6. Verify if restarting node resets R bit in BGP open message
+ during normal BGP session flaps as well, even when GR restarting
+ mode is enabled. Here link flap happen due to interface UP/DOWN.
+7. Verify if restarting node resets R bit in BGP
+ open message during normal BGP session flaps when GR is disabled.
+8. Verify that restarting nodes set "F" bit while sending
+ the BGP open messages after it restarts, only when BGP GR is enabled.
+9. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+10. Verify that GR helper routers keeps all the routes received
+ from restarting node if both the routers are configured as
+ GR restarting node.
+11. Verify that GR helper routers delete all the routes
+ received from a node if both the routers are configured as GR
+ helper node.
+12. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+13. After BGP neighborship is established and GR capability is exchanged,
+ transition restarting router to disabled state and vice versa.
+14. Verify that restarting nodes reset "F" bit while sending
+ the BGP open messages after it's restarts, when BGP GR is **NOT** enabled.
+15. Verify that only GR helper routers keep the stale
+ route entries, not any GR disabled router.
+16. Transition from Global Restarting to Disable and then Global
+ Disable to Restarting.
+17. Transition from Global Helper to Disable and then Global
+ Disable to Helper.
+18. Transition from Global Restart to Helper and then Global
+ Helper to Restart, Global Mode : GR Restarting
+ PerPeer Mode : GR Helper
+ GR Mode effective : GR Helper
+19. Transition from Peer-level helper to Global Restarting,
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+20. Transition from Peer-level restart to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+21. Transition from Peer-level disabled to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Disabled
+ GR Mode effective : GR Disabled
+22. Peer-level inherit from Global Restarting
+ Global Mode : GR Restart
+ PerPeer Mode : None
+ GR Mode effective : GR Restart
+23. Transition from Peer-level disbale to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : GR Disable
+ GR Mode effective : GR Disable
+
+These tests have been broken up into 4 sub python scripts because
+the totality of this run was fairly significant.
+"""
+
+import os
+import sys
+import time
+import pytest
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ shutdown_bringup_interface,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+NEXT_HOP_IP = {"ipv4": "192.168.1.10", "ipv6": "fd00:0:0:1::10"}
+NEXT_HOP_IP_1 = {"ipv4": "192.168.0.1", "ipv6": "fd00::1"}
+NEXT_HOP_IP_2 = {"ipv4": "192.168.0.2", "ipv6": "fd00::2"}
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 20
+PREFERRED_NEXT_HOP = "link_local"
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ global ADDR_TYPES
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo1.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"]["r2-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(
+ tgen, dut, peer, addr_type, next_hop_dict, preferred_next_hop=PREFERRED_NEXT_HOP
+):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in preferred_next_hop:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def BGP_GR_TC_50_p1(request):
+ """
+ Test Objective : Transition from Peer-level helper to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : Helper
+ GR Mode effective : GR Helper
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step(
+ "Configure R1 as GR helper node at per Peer-level for R2"
+ " and configure R2 as global restarting node."
+ )
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a helper node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Bring up BGP on R2 and remove Peer-level GR config from R1 ")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ step("Verify on R2 that R1 still advertises GR capabilities as a helper node")
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ next_hop = next_hop_per_address_family(
+ tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Start BGP on R2")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_46_p1(request):
+ """
+ Test Objective : transition from Peer-level helper to Global Restarting
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Helper
+ GR Mode effective : GR Helper
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step(
+ "Configure R1 and R2 as GR restarting node in global"
+ " and helper in per-Peer-level"
+ )
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps the stale entries in RIB & FIB and R2 keeps stale entries in FIB using"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step(
+ "Bring up BGP on R1 and remove Peer-level GR config"
+ " from R1 following by a session reset"
+ )
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-helper": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps the stale entries in FIB command and R2 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_47_p1(request):
+ """
+ Test Objective : transition from Peer-level restart to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Restarting
+ GR Mode effective : GR Restarting
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step("Configure R1 and R2 as GR restarting node in global and per-Peer-level")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step(
+ "Bring up BGP on R1 and remove Peer-level GR"
+ " config from R1 following by a session reset"
+ )
+
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 still advertises GR capabilities as a restarting node")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_48_p1(request):
+ """
+ Test Objective : transition from Peer-level disabled to Global Restart
+ Global Mode : GR Restarting
+ PerPeer Mode : GR Disabled
+ GR Mode effective : GR Disabled
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step(
+ "Configure R1 as GR restarting node in global level and"
+ " GR Disabled in per-Peer-level"
+ )
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 does't advertise any GR capabilities")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step("Verify on R2 and R1 that none of the routers keep stale entries")
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r2: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r2: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+
+ step("Bring up BGP on R1 and remove Peer-level GR config from R1")
+
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_49_p1(request):
+ """
+ Test Objective : Peer-level inherit from Global Restarting
+ Global Mode : GR Restart
+ PerPeer Mode : None
+ GR Mode effective : GR Restart
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step("Configure R1 as GR restarting node in global level")
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step(
+ "Verify that R2 receives GR restarting capabilities"
+ " from R1 based on inheritence"
+ )
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGPd on router R1")
+
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ step(
+ "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r1"
+ peer = "r2"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r2"
+ peer = "r1"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+def BGP_GR_TC_52_p1(request):
+ """
+ Test Objective : Transition from Peer-level disbale to Global inherit helper
+ Global Mode : None
+ PerPeer Mode : GR Disable
+ GR Mode effective : GR Disable
+
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step(
+ "Configure R1 as GR disabled node at per Peer-level for R2"
+ " & R2 as GR restarting node"
+ )
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step("Verify on R2 that R1 does't advertise any GR capabilities")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 doesn't keep RIB & FIB entries."
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(
+ tgen, addr_type, dut, input_topo, next_hop, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ result = verify_rib(
+ tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+
+ step("Bring up BGP on R2 and remove Peer-level GR config from R1")
+
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": False}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1-link1": {"graceful-restart-disable": False}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ step(
+ "Verify on R2 that R1 advertises GR capabilities as a helper node from global inherit"
+ )
+
+ input_dict = {
+ "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Kill BGP on R2")
+
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ step(
+ "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
+ )
+
+ for addr_type in ADDR_TYPES:
+ dut = "r2"
+ peer = "r1"
+ protocol = "bgp"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_1
+ )
+ input_topo = {"r1": topo["routers"]["r1"]}
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ dut = "r1"
+ peer = "r2"
+ next_hop = next_hop_per_address_family(
+ tgen, dut, peer, addr_type, NEXT_HOP_IP_2
+ )
+ input_topo = {"r2": topo["routers"]["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+ result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
+ assert (
+ result is True
+ ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
+++ /dev/null
-#!/usr/bin/env python
-#
-# Copyright (c) 2019 by VMware, Inc. ("VMware")
-# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
-# in this file.
-#
-# Permission to use, copy, modify, and/or distribute this software
-# for any purpose with or without fee is hereby granted, provided
-# that the above copyright notice and this permission notice appear
-# in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
-# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
-# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
-# OF THIS SOFTWARE.
-#
-
-"""
-Following tests are covered to test BGP Gracefull Restart functionality.
-Basic Common Test steps for all the test case below :
-- Create topology (setup module)
- Creating 2 routers topology, r1, r2 in IBGP
-- Bring up topology
-- Verify for bgp to converge
-- Configure BGP Garceful Restart on both the routers.
-
-1. Transition from Peer-level helper to Global Restarting
-2. Transition from Peer-level helper to Global inherit helper
-3. Transition from Peer-level restarting to Global inherit helper
-4. Default GR functional mode is Helper.
-5. Verify that the restarting node sets "R" bit while sending the
- BGP open messages after the node restart, only if GR is enabled.
-6. Verify if restarting node resets R bit in BGP open message
- during normal BGP session flaps as well, even when GR restarting
- mode is enabled. Here link flap happen due to interface UP/DOWN.
-7. Verify if restarting node resets R bit in BGP
- open message during normal BGP session flaps when GR is disabled.
-8. Verify that restarting nodes set "F" bit while sending
- the BGP open messages after it restarts, only when BGP GR is enabled.
-9. Verify that only GR helper routers keep the stale
- route entries, not any GR disabled router.
-10. Verify that GR helper routers keeps all the routes received
- from restarting node if both the routers are configured as
- GR restarting node.
-11. Verify that GR helper routers delete all the routes
- received from a node if both the routers are configured as GR
- helper node.
-12. After BGP neighborship is established and GR capability is exchanged,
- transition restarting router to disabled state and vice versa.
-13. After BGP neighborship is established and GR capability is exchanged,
- transition restarting router to disabled state and vice versa.
-14. Verify that restarting nodes reset "F" bit while sending
- the BGP open messages after it's restarts, when BGP GR is **NOT** enabled.
-15. Verify that only GR helper routers keep the stale
- route entries, not any GR disabled router.
-16. Transition from Global Restarting to Disable and then Global
- Disable to Restarting.
-17. Transition from Global Helper to Disable and then Global
- Disable to Helper.
-18. Transition from Global Restart to Helper and then Global
- Helper to Restart, Global Mode : GR Restarting
- PerPeer Mode : GR Helper
- GR Mode effective : GR Helper
-19. Transition from Peer-level helper to Global Restarting,
- Global Mode : GR Restarting
- PerPeer Mode : GR Restarting
- GR Mode effective : GR Restarting
-20. Transition from Peer-level restart to Global Restart
- Global Mode : GR Restarting
- PerPeer Mode : GR Restarting
- GR Mode effective : GR Restarting
-21. Transition from Peer-level disabled to Global Restart
- Global Mode : GR Restarting
- PerPeer Mode : GR Disabled
- GR Mode effective : GR Disabled
-22. Peer-level inherit from Global Restarting
- Global Mode : GR Restart
- PerPeer Mode : None
- GR Mode effective : GR Restart
-23. Transition from Peer-level disbale to Global inherit helper
- Global Mode : None
- PerPeer Mode : GR Disable
- GR Mode effective : GR Disable
-"""
-
-import os
-import sys
-import time
-import pytest
-
-# Save the Current Working Directory to find configuration files.
-CWD = os.path.dirname(os.path.realpath(__file__))
-sys.path.append(os.path.join("../"))
-sys.path.append(os.path.join("../lib/"))
-
-# pylint: disable=C0413
-# Import topogen and topotest helpers
-from lib.topogen import Topogen, get_topogen
-from lib.topolog import logger
-
-# Required to instantiate the topology builder class.
-
-# Import topoJson from lib, to create topology and initial configuration
-from lib.topojson import build_config_from_json
-from lib.bgp import (
- clear_bgp,
- verify_bgp_rib,
- verify_graceful_restart,
- create_router_bgp,
- verify_r_bit,
- verify_f_bit,
- verify_bgp_convergence,
- verify_bgp_convergence_from_running_config,
-)
-
-from lib.common_config import (
- write_test_header,
- reset_config_on_routers,
- start_topology,
- kill_router_daemons,
- start_router_daemons,
- verify_rib,
- check_address_types,
- write_test_footer,
- check_router_status,
- shutdown_bringup_interface,
- step,
- get_frr_ipv6_linklocal,
- required_linux_kernel_version,
-)
-
-pytestmark = [pytest.mark.bgpd]
-
-
-# Global variables
-NEXT_HOP_IP = {"ipv4": "192.168.1.10", "ipv6": "fd00:0:0:1::10"}
-NEXT_HOP_IP_1 = {"ipv4": "192.168.0.1", "ipv6": "fd00::1"}
-NEXT_HOP_IP_2 = {"ipv4": "192.168.0.2", "ipv6": "fd00::2"}
-BGP_CONVERGENCE = False
-GR_RESTART_TIMER = 20
-PREFERRED_NEXT_HOP = "link_local"
-
-
-def setup_module(mod):
- """
- Sets up the pytest environment
-
- * `mod`: module name
- """
-
- global ADDR_TYPES
-
- # Required linux kernel version for this suite to run.
- result = required_linux_kernel_version("4.16")
- if result is not True:
- pytest.skip("Kernel requirements are not met")
-
- testsuite_run_time = time.asctime(time.localtime(time.time()))
- logger.info("Testsuite start time: {}".format(testsuite_run_time))
- logger.info("=" * 40)
-
- logger.info("Running setup_module to create topology")
-
- # This function initiates the topology build with Topogen...
- json_file = "{}/bgp_gr_topojson_topo1.json".format(CWD)
- tgen = Topogen(json_file, mod.__name__)
- global topo
- topo = tgen.json_topo
- # ... and here it calls Mininet initialization functions.
-
- # Starting topology, create tmp files which are loaded to routers
- # to start deamons and then start routers
- start_topology(tgen)
-
- # Creating configuration from JSON
- build_config_from_json(tgen, topo)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Api call verify whether BGP is converged
- ADDR_TYPES = check_address_types()
-
- BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
- assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
- BGP_CONVERGENCE
- )
-
- logger.info("Running setup_module() done")
-
-
-def teardown_module(mod):
- """
- Teardown the pytest environment
-
- * `mod`: module name
- """
-
- logger.info("Running teardown_module to delete topology")
-
- tgen = get_topogen()
-
- # Stop toplogy and Remove tmp files
- tgen.stop_topology()
-
- logger.info(
- "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
- )
- logger.info("=" * 40)
-
-
-def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
- """
- This function groups the repetitive function calls into one function.
- """
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"][peer]["links"]["r1-link1"][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"][dut]["links"]["r2-link1"][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
-
- result = verify_bgp_convergence_from_running_config(tgen)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- return True
-
-
-def next_hop_per_address_family(
- tgen, dut, peer, addr_type, next_hop_dict, preferred_next_hop=PREFERRED_NEXT_HOP
-):
- """
- This function returns link_local or global next_hop per address-family
- """
-
- intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
- if addr_type == "ipv6" and "link_local" in preferred_next_hop:
- next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
- else:
- next_hop = next_hop_dict[addr_type]
-
- return next_hop
-
-
-def BGP_GR_TC_50_p1(request):
- """
- Test Objective : Transition from Peer-level helper to Global inherit helper
- Global Mode : None
- PerPeer Mode : Helper
- GR Mode effective : GR Helper
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step(
- "Configure R1 as GR helper node at per Peer-level for R2"
- " and configure R2 as global restarting node."
- )
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a helper node")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step(
- "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Bring up BGP on R2 and remove Peer-level GR config from R1 ")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": False}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": False}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
-
- result = verify_bgp_convergence_from_running_config(tgen)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- step("Verify on R2 that R1 still advertises GR capabilities as a helper node")
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step(
- "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Start BGP on R2")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_51_p1(request):
- """
- Test Objective : Transition from Peer-level restarting to Global inherit helper
- Global Mode : None
- PerPeer Mode : GR Restart
- GR Mode effective : GR Restart
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step("Configure R1 as GR restarting node at per Peer-level for R2")
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, "r2", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps the stale entries in FIB & R2 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, "r2", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Bring up BGP on R1 and remove Peer-level GR config")
-
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": False}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": False}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
-
- result = verify_bgp_convergence_from_running_config(tgen)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- step("Verify on R2 that R1 advertises GR capabilities as a helper node")
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGPd on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step(
- "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} : Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Start BGP on R2")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_53_p1(request):
- """
- Test Objective : Default GR functional mode is Helper.
- Global Mode : None
- PerPeer Mode : None
- GR Mode effective : GR Helper
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step("configure R2 as global restarting node")
-
- input_dict = {"r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}}
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step(
- "Verify on R2 that R1 advertises GR capabilities as a helper node based on inherit"
- )
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGPd on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step(
- "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, "r2", "r1", addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, "r2", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- next_hop = next_hop_per_address_family(
- tgen, "r1", "r2", addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, "r1", input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_rib(tgen, addr_type, "r1", input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Start BGP on R2")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_4_p0(request):
- """
- Test Objective : Verify that the restarting node sets "R" bit while sending the
- BGP open messages after the node restart, only if GR is enabled.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Helper Mode] initialized "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : R2 goes for reload ")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info(
- "[Phase 3] : R2 is still down, restart time {} sec."
- "So time verify the routes are present in BGP RIB and ZEBRA ".format(
- GR_RESTART_TIMER
- )
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- logger.info("[Phase 5] : R2 is about to come up now ")
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_5_1_2_p1(request):
- """
- Test Objective : Verify if restarting node resets R bit in BGP open message
- during normal BGP session flaps as well, even when GR restarting mode is enabled.
- Here link flap happen due to interface UP/DOWN.
-
- """
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Restart Mode] initialized "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : Now flap the link running the BGP session ")
- # Shutdown interface
- intf = "r2-r1-eth0"
- shutdown_bringup_interface(tgen, "r2", intf)
-
- # Bring up Interface
- shutdown_bringup_interface(tgen, "r2", intf, ifaceaction=True)
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : Restart BGPd on router R2. ")
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_6_1_2_p1(request):
- """
- Test Objective : Verify if restarting node resets R bit in BGP
- open message during normal BGP session flaps when GR is disabled.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Phase 1] : Test Setup" "[Restart Mode]R1-----R2[Helper Mode] initialized "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 1] : Changing mode" "[Disable Mode]R1-----R2[Helper Mode]")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
-
- result = verify_bgp_convergence_from_running_config(tgen)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- # Verify GR stats
- input_dict = {
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- # here the verify_graceful_restart fro the neighbor would be
- # "NotReceived" as the latest GR config is not yet applied.
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : Now flap the link running the BGP session ")
- # Shutdown interface
- intf = "r2-r1-eth0"
- shutdown_bringup_interface(tgen, "r2", intf)
-
- # Bring up Interface
- shutdown_bringup_interface(tgen, "r2", intf, ifaceaction=True)
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_r_bit(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r2: R-bit is set to True\n Error: {}".format(
- tc_name, result
- )
-
- logger.info("Restart BGPd on R2 ")
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_r_bit(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r2: R-bit is set to True\n Error: {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_8_p1(request):
- """
- Test Objective : Verify that restarting nodes set "F" bit while sending
- the BGP open messages after it restarts, only when BGP GR is enabled.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Restart Mode] initialized "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {"preserve-fw-state": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : R1 goes for reload ")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Phase 3] : R1 is about to come up now ")
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r2", peer="r1")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_f_bit(tgen, topo, addr_type, input_dict, dut="r2", peer="r1")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_19_p1(request):
- """
- Test Objective : Verify that GR helper routers keeps all the routes received
- from restarting node if both the routers are configured as GR restarting node.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info("[Phase 1] : Test Setup [Helper]R1-----R2[Restart] initialized ")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "preserve-fw-state": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info(
- "[Phase 2] : R1's Gr state cahnge to Graceful"
- " Restart without resetting the session "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- logger.info(
- "[Phase 3] : R2 is still down, restart time 120 sec."
- " So time verify the routes are present in BGP RIB and ZEBRA "
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_20_p1(request):
- """
- Test Objective : Verify that GR helper routers delete all the routes
- received from a node if both the routers are configured as GR helper node.
- """
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info("[Phase 1] : Test Setup [Helper]R1-----R2[Helper] initialized ")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "preserve-fw-state": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- logger.info("[Phase 5] : R2 is about to come up now ")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_31_1_p1(request):
- """
- After BGP neighborship is established and GR capability is exchanged,
- transition restarting router to disabled state and vice versa.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Phase 1] : Test Setup" " [Helper Mode]R2-----R1[Restart Mode] initialized "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r1": {
- "bgp": {
- "graceful-restart": {"preserve-fw-state": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- },
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : R1 Goes from Restart to Disable Mode ")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
-
- result = verify_bgp_convergence_from_running_config(tgen)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- # Verify GR stats
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : R1 goes for reload ")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info(
- "[Phase 3] : R1 is still down, restart time 120 sec."
- " So time verify the routes are not present in BGP RIB and ZEBRA"
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
-
- logger.info("[Phase 4] : R1 is about to come up now ")
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Phase 5] : R1 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_31_2_p1(request):
- """
- After BGP neighborship is established and GR capability is exchanged,
- transition restarting router to disabled state and vice versa.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Phase 1] : Test Setup " "[Disable Mode]R1-----R2[Restart Mode] initialized "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 2] : R2 Goes from Disable to Restart Mode ")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {"preserve-fw-state": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- },
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"]["r2"]["links"]["r1-link1"][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, "r1", neighbor=neighbor)
-
- result = verify_bgp_convergence_from_running_config(tgen)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- # Verify GR stats
- input_dict = {
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- # here the verify_graceful_restart fro the neighbor would be
- # "NotReceived" as the latest GR config is not yet applied.
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 6] : R1 is about to come up now ")
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Phase 4] : R1 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 3] : R1 goes for reload ")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info(
- "[Phase 4] : R1 is still down, restart time 120 sec."
- " So time verify the routes are present in BGP RIB and ZEBRA "
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Phase 6] : R1 is about to come up now ")
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Phase 4] : R1 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_9_p1(request):
- """
- Test Objective : Verify that restarting nodes reset "F" bit while sending
- the BGP open messages after it's restarts, when BGP GR is **NOT** enabled.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Phase 1] : Test Setup" " [Restart Mode]R1-----R2[Helper Mode] Initiliazed "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "graceful-restart": {"preserve-fw-state": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info("[Phase 2] : R2 goes for reload ")
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info(
- "[Phase 3] : R2 is still down, restart time 120 sec."
- "So time verify the routes are present in BGP RIB and ZEBRA "
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- logger.info("[Phase 5] : R2 is about to come up now ")
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_bgp_convergence(tgen, topo)
- assert (
- result is True
- ), "BGP Convergence after BGPd restart" " :Failed \n Error:{}".format(result)
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r2")
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_f_bit(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r1: F-bit is set to True\n Error: {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_17_p1(request):
- """
- Test Objective : Verify that only GR helper routers keep the stale
- route entries, not any GR disabled router.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info("[Phase 1] : Test Setup [Disable]R1-----R2[Restart] " "Initiliazed ")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "preserve-fw-state": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info("[Phase 2] : R2 goes for reload ")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info(
- "[Phase 3] : R2 is still down, restart time 120 sec."
- " So time verify the routes are present in BGP RIB and ZEBRA "
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- logger.info("[Phase 5] : R2 is about to come up now ")
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info("[Phase 4] : R2 is UP now, so time to collect GR stats ")
-
- for addr_type in ADDR_TYPES:
- result = verify_bgp_convergence(tgen, topo)
- assert (
- result is True
- ), "BGP Convergence after BGPd restart" " :Failed \n Error:{}".format(result)
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_r_bit(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r1: R-bit is set to True\n Error: {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_43_p1(request):
- """
- Test Objective : Transition from Global Restarting to Disable
- and then Global Disable to Restarting.
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step("Configure R1 and R2 as GR restarting node in global level")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps BGP routes in zebra and R2 retains"
- " the stale entry for received routes from R1"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Bring up BGPd on R1 and configure it as GR disabled node in global level")
-
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": False,
- "graceful-restart-disable": True,
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 doesn't advertise any GR capabilities")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart-disable": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- protocol = "bgp"
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 flush all BGP routes from RIB & FIB and FIB and R2"
- " does not retain stale entry for received routes from R1"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert (
- result is not True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r2: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- protocol = "bgp"
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert (
- result is not True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step(
- "Bring up BGPd on R1 and configure it as GR" " restarting node in global level"
- )
-
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- input_dict = {"r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}}}
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps BGP routes in zebra and R2"
- " retains the stale entry for received routes from R1"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_44_p1(request):
- """
- Test Objective : Transition from Global Helper to Disable
- and then Global Disable to Helper.
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step(
- "Configure R2 as GR restating node in global level and"
- " leave R1 without any GR related config"
- )
-
- input_dict = {"r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}}}
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a helper node")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart-helper": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step("Verify that R1 keeps stale entry for BGP routes when BGPd on R2 is down")
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Bring up BGPd on R2 and configure R1 as GR disabled node in global level")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart-disable": True,
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 doesn't advertise any GR capabilities")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart-disable": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step("Verify that R1 does not retain stale entry for received routes from R2")
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- next_hop = NEXT_HOP_IP_2[addr_type]
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert (
- result is not True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Bring up BGPd on R2 and remove GR related config from R1 in global level")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart-disable": False}}}
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a helper node")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart-helper": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step("Verify that R1 keeps stale entry for BGP routes when BGPd on R2 is down")
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_45_p1(request):
- """
- Test Objective : Transition from Global Restart to Helper
- and then Global Helper to Restart.
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step("Configure R1 and R2 as GR restarting node in global level")
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps BGP routes in zebra and R2"
- " retains the stale entry for received routes from R1"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Bring up BGPd on R1 and remove GR related config in global level")
-
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": False,
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a helper node")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart-helper": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step("Verify that R1 keeps stale entry for BGP routes when BGPd on R2 is down")
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Bring up BGPd on R2 and configure R1 as GR restarting node in global level")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps BGP routes in zebra and R2"
- " retains the stale entry for received routes from R1"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_46_p1(request):
- """
- Test Objective : transition from Peer-level helper to Global Restarting
- Global Mode : GR Restarting
- PerPeer Mode : GR Helper
- GR Mode effective : GR Helper
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step(
- "Configure R1 and R2 as GR restarting node in global"
- " and helper in per-Peer-level"
- )
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step(
- "Verify that R1 keeps the stale entries in RIB & FIB and R2 keeps stale entries in FIB using"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step(
- "Bring up BGP on R1 and remove Peer-level GR config"
- " from R1 following by a session reset"
- )
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": False}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-helper": False}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps the stale entries in FIB command and R2 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_47_p1(request):
- """
- Test Objective : transition from Peer-level restart to Global Restart
- Global Mode : GR Restarting
- PerPeer Mode : GR Restarting
- GR Mode effective : GR Restarting
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step("Configure R1 and R2 as GR restarting node in global and per-Peer-level")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step(
- "Bring up BGP on R1 and remove Peer-level GR"
- " config from R1 following by a session reset"
- )
-
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": False}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart": False}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 still advertises GR capabilities as a restarting node")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_48_p1(request):
- """
- Test Objective : transition from Peer-level disabled to Global Restart
- Global Mode : GR Restarting
- PerPeer Mode : GR Disabled
- GR Mode effective : GR Disabled
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step(
- "Configure R1 as GR restarting node in global level and"
- " GR Disabled in per-Peer-level"
- )
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 does't advertise any GR capabilities")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step("Verify on R2 and R1 that none of the routers keep stale entries")
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r2: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r2: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
-
- step("Bring up BGP on R1 and remove Peer-level GR config from R1")
-
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": False}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": False}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 advertises GR capabilities as a restarting node")
-
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_49_p1(request):
- """
- Test Objective : Peer-level inherit from Global Restarting
- Global Mode : GR Restart
- PerPeer Mode : None
- GR Mode effective : GR Restart
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step("Configure R1 as GR restarting node in global level")
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- "r2": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step(
- "Verify that R2 receives GR restarting capabilities"
- " from R1 based on inheritence"
- )
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGPd on router R1")
-
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- step(
- "Verify that R1 keeps the stale entries in FIB and R2 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r1"
- peer = "r2"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r2"
- peer = "r1"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def BGP_GR_TC_52_p1(request):
- """
- Test Objective : Transition from Peer-level disbale to Global inherit helper
- Global Mode : None
- PerPeer Mode : GR Disable
- GR Mode effective : GR Disable
-
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step(
- "Configure R1 as GR disabled node at per Peer-level for R2"
- " & R2 as GR restarting node"
- )
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step("Verify on R2 that R1 does't advertise any GR capabilities")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step(
- "Verify that R2 keeps the stale entries in FIB & R1 doesn't keep RIB & FIB entries."
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(
- tgen, addr_type, dut, input_topo, next_hop, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- result = verify_rib(
- tgen, addr_type, dut, input_topo, next_hop, protocol, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
-
- step("Bring up BGP on R2 and remove Peer-level GR config from R1")
-
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": False}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1-link1": {"graceful-restart-disable": False}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- step(
- "Verify on R2 that R1 advertises GR capabilities as a helper node from global inherit"
- )
-
- input_dict = {
- "r1": {"bgp": {"graceful-restart": {"graceful-restart-helper": True}}},
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- step("Kill BGP on R2")
-
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- step(
- "Verify that R2 keeps the stale entries in FIB & R1 keeps stale entries in RIB & FIB"
- )
-
- for addr_type in ADDR_TYPES:
- dut = "r2"
- peer = "r1"
- protocol = "bgp"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_1
- )
- input_topo = {"r1": topo["routers"]["r1"]}
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- dut = "r1"
- peer = "r2"
- next_hop = next_hop_per_address_family(
- tgen, dut, peer, addr_type, NEXT_HOP_IP_2
- )
- input_topo = {"r2": topo["routers"]["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo, next_hop)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
- result = verify_rib(tgen, addr_type, dut, input_topo, next_hop, protocol)
- assert (
- result is True
- ), "Testcase {} :Failed \n Routes are still present \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-if __name__ == "__main__":
- args = ["-s"] + sys.argv[1:]
- sys.exit(pytest.main(args))
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Graceful Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 7 routers topology
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Graceful Restart on both the routers.
+
+TC_1_2:
+ Verify that EOR message is sent out only after initial convergence
+ Verify whether EOR message is received from all the peers after restart
+TC_3:
+ Verify the selection deferral timer functionality when EOR is not sent
+ by the helper router
+TC_11:
+ Verify that selection-deferral timer sets the maximum time to
+ avoid deadlock during which the best-path
+TC_10:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_15:
+ Test Objective : Test GR scenarios by enabling Graceful Restart
+ for multiple address families..
+TC_16:
+ Test Objective : Verify BGP-GR feature when restarting node
+ is a transit router for it's iBGP peers.
+TC_18:
+ Test Objective : Verify that GR helper router deletes stale routes
+ received from restarting node, if GR capability is not present in
+TC_19:
+ Test Objective : Verify that GR routers keeps all the routes
+ received from restarting node if both the routers are
+TC_26:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_28:
+ Test Objective : Verify if helper node goes down before restarting
+ node comes up online, helper node sets the R-bit to avoid dead-lock
+TC_29:
+ Test Objective : Change timers on the fly, and
+ verify if it takes immediate effect.
+TC_33:
+ Test Objective : Helper router receives same prefixes from two
+ different routers (GR-restarting and GR-disabled). Keeps the
+TC_34_1:
+ Test Objective : Restarting node doesn't preserve forwarding
+ state, helper router should not keep the stale entries.
+TC_34_2:
+ Test Objective : Restarting node doesn't preserve the forwarding
+ state verify the behaviour on helper node, if it still keeps the
+TC_32:
+ Test Objective : Restarting node is connected to multiple helper
+ nodes, one of them doesn't send EOR to restarting router. Verify
+TC_37:
+ Test Objective : Verify if helper node restarts before sending the
+ EOR message, restarting node doesn't wait until stale path timer
+TC_30:
+ Test Objective : Restarting node removes stale routes from Zebra
+ after receiving an EOR from helper router.
+
+"""
+
+import os
+import sys
+import time
+import pytest
+from time import sleep
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_eor,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_gr_address_family,
+ modify_bgp_config_when_bgpd_down,
+ verify_graceful_restart_timers,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 5
+GR_SELECT_DEFER_TIMER = 5
+GR_STALEPATH_TIMER = 5
+PREFERRED_NEXT_HOP = "link_local"
+NEXT_HOP_4 = ["192.168.1.1", "192.168.4.2"]
+NEXT_HOP_6 = ["fd00:0:0:1::1", "fd00:0:0:4::2"]
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ global ADDR_TYPES
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo2.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ for addr_type in ADDR_TYPES:
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ logger.info("configure_gr_followed_by_clear: dut %s peer %s", dut, peer)
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"][dut][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"][peer][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(tgen, dut, peer, addr_type, next_hop_dict):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in PREFERRED_NEXT_HOP:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def test_BGP_GR_TC_1_2_p0(request):
+ """
+ Verify that EOR message is sent out only after initial convergence
+ Verify whether EOR message is received from all the peers after restart
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "Verify EOR Sent and Received : BGP_GR_TC_1_2 >> "
+ "BGP GR [Helper Mode]R3-----R1[Restart Mode] "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "preserve-fw-state": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes received from router R3
+ dut = "r1"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("R1 goes for reload")
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("Starting bgpd process")
+ start_router_daemons(tgen, "r1", ["bgpd"])
+ logger.info("R1 is UP Now")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes received from router R3
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying EOR on restarting router
+ result = verify_eor(tgen, topo, addr_type, input_dict, dut="r3", peer="r1")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_3_p0(request):
+ """
+ Verify the selection deferral timer functionality when EOR is not sent
+ by the helper router
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Verify route download to RIB: BGP_GR_TC_3 >> "
+ "BGP GR [Helper Mode]R1-----R2[Restart Mode] "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "disable-eor": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "preserve-fw-state": True,
+ "timer": {"select-defer-time": GR_SELECT_DEFER_TIMER},
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes received from router R1
+ dut = "r2"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("R2 goes for reload ")
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ logger.info("R2 is about to come up now")
+ start_router_daemons(tgen, "r2", ["bgpd"])
+ logger.info("R2 is UP Now")
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes received from router R1
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verify EOR on restarting router
+ result = verify_eor(
+ tgen, topo, addr_type, input_dict, dut="r2", peer="r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r2: EOR is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ logger.info(
+ "Waiting for selection deferral timer({} sec)..".format(GR_SELECT_DEFER_TIMER)
+ )
+ sleep(GR_SELECT_DEFER_TIMER)
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, "r2", input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_TC_11_p0(request):
+ """
+ Verify that selection-deferral timer sets the maximum time to
+ avoid deadlock during which the best-path
+ selection process is deferred, after a peer session was restarted
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info("Verify EOR Sent after deferral timeout : BGP_GR_TC_11")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "select-defer-time": GR_SELECT_DEFER_TIMER,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}},
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}},
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}},
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}},
+ }
+ }
+ },
+ },
+ }
+ },
+ "r3": {
+ "bgp": {
+ "graceful-restart": {"disable-eor": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ clear_bgp(tgen, addr_type, "r1")
+ clear_bgp(tgen, addr_type, "r3")
+
+ result = verify_bgp_convergence_from_running_config(tgen, topo)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes received from router R1
+ dut = "r1"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("R1 goes for reload")
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("Starting bgpd process")
+ start_router_daemons(tgen, "r1", ["bgpd"])
+ logger.info("R1 is UP Now")
+
+ for addr_type in ADDR_TYPES:
+ # Verify EOR on restarting router
+ result = verify_eor(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r1: EOR is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ logger.info(
+ "Waiting for selection deferral timer({} sec).. ".format(
+ GR_SELECT_DEFER_TIMER + 2
+ )
+ )
+ sleep(GR_SELECT_DEFER_TIMER + 2)
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes received from router R1
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying EOR on restarting router
+ result = verify_eor(
+ tgen, topo, addr_type, input_dict, dut="r3", peer="r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r3: EOR is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_10_p2(request):
+ """
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ step("Test Setup: [Helper Mode]R3-----R1[Restart Mode] initialized")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "next_hop_self": True,
+ "graceful-restart": True,
+ "activate": "ipv6",
+ }
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "next_hop_self": True,
+ "graceful-restart": True,
+ "activate": "ipv4",
+ }
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {
+ "graceful-restart-helper": True,
+ "activate": "ipv6",
+ }
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {
+ "graceful-restart-helper": True,
+ "activate": "ipv4",
+ }
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ step(
+ "Verifying GR config and operational state for addr_type {}".format(
+ addr_type
+ )
+ )
+
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_topo = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv4Unicast",
+ dut="r1",
+ peer="r3",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv6Unicast",
+ dut="r1",
+ peer="r3",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv4Unicast",
+ dut="r3",
+ peer="r1",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv6Unicast",
+ dut="r3",
+ peer="r1",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Killing bgpd on r1")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ input_topo = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ step("Starting bgpd on r1")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ input_topo = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def BGP_GR_16_p2(request):
+ """
+ Test Objective : Verify BGP-GR feature when restarting node
+ is a transit router for it's iBGP peers.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Step 1] : Test Setup " "[Helper Mode]R3-----R1[Restart Mode] initialized"
+ )
+
+ # Configure graceful-restart and timers
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "graceful-restart": True,
+ "next_hop_self": True,
+ }
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "graceful-restart": True,
+ "next_hop_self": True,
+ }
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info(
+ "[Step 2] : Test Setup "
+ "[Helper Mode]R3-----R1[Restart Mode]"
+ "--------R6[Helper Mode] initialized"
+ )
+
+ # Configure graceful-restart and timers
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ result = verify_bgp_convergence_from_running_config(tgen, topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_18_p1(request):
+ """
+ Test Objective : Verify that GR helper router deletes stale routes
+ received from restarting node, if GR capability is not present in
+ restarting node's OPEN message.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Step 1] : Test Setup " "[Helper Mode]R6-----R1[Restart Mode] initialized"
+ )
+
+ # Configure graceful-restart and timers
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r6": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r6": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r6": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r6")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r6"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info(
+ "[Step 2] : Test Setup "
+ "[Helper Mode]R6-----R1[Restart Mode]"
+ "--------R2[Helper Mode] initialized"
+ )
+
+ # Configure graceful-restart and timers
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r2"
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 3] : Configure R1 to prevent sending EOR")
+
+ # Modify graceful-restart config to prevent sending EOR
+ input_dict_3 = {"r1": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
+
+ # Modify configuration to delete routes
+ network = {"ipv4": "101.0.20.1/32", "ipv6": "1::1/128"}
+ for addr_type in ADDR_TYPES:
+ input_dict_3 = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ addr_type: {
+ "unicast": {
+ "advertise_networks": [
+ {
+ "network": network[addr_type],
+ "no_of_network": 5,
+ "delete": True,
+ }
+ ]
+ }
+ }
+ }
+ }
+ }
+ }
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Modify graceful-restart config
+ input_dict_3 = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-disable": True}
+ }
+ },
+ "r6": {
+ "dest_link": {
+ "r1": {"graceful-restart-disable": True}
+ }
+ },
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-disable": True}
+ }
+ },
+ "r6": {
+ "dest_link": {
+ "r1": {"graceful-restart-disable": True}
+ }
+ },
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(tc_name, result)
+
+ logger.info("[Step 4] : Bring up the BGPd daemon on R1 for 30" " seconds..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r6: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r6: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying BGP RIB routes
+ dut = "r2"
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r2: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r6: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Graceful Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 7 routers topology
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Graceful Restart on both the routers.
+
+TC_1_2:
+ Verify that EOR message is sent out only after initial convergence
+ Verify whether EOR message is received from all the peers after restart
+TC_3:
+ Verify the selection deferral timer functionality when EOR is not sent
+ by the helper router
+TC_11:
+ Verify that selection-deferral timer sets the maximum time to
+ avoid deadlock during which the best-path
+TC_10:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_15:
+ Test Objective : Test GR scenarios by enabling Graceful Restart
+ for multiple address families..
+TC_16:
+ Test Objective : Verify BGP-GR feature when restarting node
+ is a transit router for it's iBGP peers.
+TC_18:
+ Test Objective : Verify that GR helper router deletes stale routes
+ received from restarting node, if GR capability is not present in
+TC_19:
+ Test Objective : Verify that GR routers keeps all the routes
+ received from restarting node if both the routers are
+TC_26:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_28:
+ Test Objective : Verify if helper node goes down before restarting
+ node comes up online, helper node sets the R-bit to avoid dead-lock
+TC_29:
+ Test Objective : Change timers on the fly, and
+ verify if it takes immediate effect.
+TC_33:
+ Test Objective : Helper router receives same prefixes from two
+ different routers (GR-restarting and GR-disabled). Keeps the
+TC_34_1:
+ Test Objective : Restarting node doesn't preserve forwarding
+ state, helper router should not keep the stale entries.
+TC_34_2:
+ Test Objective : Restarting node doesn't preserve the forwarding
+ state verify the behaviour on helper node, if it still keeps the
+TC_32:
+ Test Objective : Restarting node is connected to multiple helper
+ nodes, one of them doesn't send EOR to restarting router. Verify
+TC_37:
+ Test Objective : Verify if helper node restarts before sending the
+ EOR message, restarting node doesn't wait until stale path timer
+TC_30:
+ Test Objective : Restarting node removes stale routes from Zebra
+ after receiving an EOR from helper router.
+
+"""
+
+import os
+import sys
+import time
+import pytest
+from time import sleep
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_eor,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_gr_address_family,
+ modify_bgp_config_when_bgpd_down,
+ verify_graceful_restart_timers,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 5
+GR_SELECT_DEFER_TIMER = 5
+GR_STALEPATH_TIMER = 5
+PREFERRED_NEXT_HOP = "link_local"
+NEXT_HOP_4 = ["192.168.1.1", "192.168.4.2"]
+NEXT_HOP_6 = ["fd00:0:0:1::1", "fd00:0:0:4::2"]
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ global ADDR_TYPES
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo2.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ for addr_type in ADDR_TYPES:
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ logger.info("configure_gr_followed_by_clear: dut %s peer %s", dut, peer)
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"][dut][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"][peer][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(tgen, dut, peer, addr_type, next_hop_dict):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in PREFERRED_NEXT_HOP:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def test_BGP_GR_26_p2(request):
+ """
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Step 1] : Test Setup " "[Helper Mode]R3-----R1[Restart Mode] initialized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "graceful-restart": True,
+ "next_hop_self": True,
+ "activate": "ipv6",
+ }
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "graceful-restart": True,
+ "next_hop_self": True,
+ "activate": "ipv4",
+ }
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {
+ "graceful-restart-helper": True,
+ "activate": "ipv6",
+ }
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {
+ "graceful-restart-helper": True,
+ "activate": "ipv4",
+ }
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r3", peer="r1"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_topo = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ input_topo = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ input_topo = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_topo)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv4Unicast",
+ dut="r1",
+ peer="r3",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv6Unicast",
+ dut="r1",
+ peer="r3",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv4Unicast",
+ dut="r3",
+ peer="r1",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # verify multi address family
+ result = verify_gr_address_family(
+ tgen,
+ topo,
+ addr_type,
+ "ipv6Unicast",
+ dut="r3",
+ peer="r1",
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_chaos_28_p1(request):
+ """
+ Test Objective : Verify if helper node goes down before restarting
+ node comes up online, helper node sets the R-bit to avoid dead-lock
+ till SDT expiry.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "Test Case: test_BGP_GR_chaos_28 :"
+ "[Helper Mode]R3-----R1[Restart Mode] initialized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 1] : Kill BGPd daemon on R1..")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 2] : Kill BGPd daemon on R3..")
+
+ # Kill BGPd daemon on R3
+ kill_router_daemons(tgen, "r3", ["bgpd"])
+
+ logger.info("[Step 3] : Start BGPd daemon on R1..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 4] : Start BGPd daemon on R3..")
+
+ # Start BGPd daemon on R3
+ start_router_daemons(tgen, "r3", ["bgpd"])
+
+ # Verify r_bit
+ for addr_type in ADDR_TYPES:
+ result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r3", peer="r1")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_chaos_29_p1(request):
+ """
+ Test Objective : Change timers on the fly, and
+ verify if it takes immediate effect.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Test Case : test_BGP_GR_chaos_29"
+ " BGP GR [Helper Mode]R3-----R1[Restart Mode]"
+ " and [restart-time 150]R1 initialized"
+ )
+
+ # Configure graceful-restart and timers
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"timer": {"restart-time": GR_RESTART_TIMER}},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verify graceful-restart timers
+ input_dict_2 = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"timer": {"restart-time": GR_RESTART_TIMER + 5}}
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ input_dict_2 = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"timer": {"restart-time": GR_RESTART_TIMER}}
+ }
+ }
+ }
+
+ result = verify_graceful_restart_timers(
+ tgen, topo, addr_type, input_dict_2, dut="r3", peer="r1"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes before shutting down BGPd daemon
+ dut = "r3"
+ input_dict = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 2] : Kill BGPd daemon on R1..")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 3] : Wait for {} seconds..".format(GR_RESTART_TIMER))
+
+ # Waiting for GR_RESTART_TIMER
+ sleep(GR_RESTART_TIMER)
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes before shutting down BGPd daemon
+ input_dict = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ logger.info("[Step 4] : Start BGPd daemon on R1..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_chaos_33_p1(request):
+ """
+ Test Objective : Helper router receives same prefixes from two
+ different routers (GR-restarting and GR-disabled). Keeps the
+ stale entry only for GR-restarting node(next-hop is correct).
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Test Case : test_BGP_GR_chaos_33 "
+ "BGP GR "
+ "[Restart Mode]R1--R3[Helper Mode]--R4[Disabled Mode]"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r4": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r4": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r4": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 2] : Advertise same networks from R1 and R4..")
+
+ # Api call to delete advertised networks
+ input_dict_2 = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "advertise_networks": [
+ {
+ "network": "200.0.20.1/32",
+ "no_of_network": 2,
+ }
+ ]
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "advertise_networks": [
+ {"network": "2001::1/128", "no_of_network": 2}
+ ]
+ }
+ },
+ }
+ }
+ },
+ "r4": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "advertise_networks": [
+ {"network": "200.0.20.1/32", "no_of_network": 2}
+ ]
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "advertise_networks": [
+ {"network": "2001::1/128", "no_of_network": 2}
+ ]
+ }
+ },
+ }
+ }
+ },
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ dut = "r3"
+ peer1 = "r1"
+ peer2 = "r4"
+ intf1 = topo["routers"][peer1]["links"][dut]["interface"]
+ intf2 = topo["routers"][peer2]["links"][dut]["interface"]
+
+ if addr_type == "ipv4":
+ next_hop_4 = NEXT_HOP_4
+ result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_4)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ if addr_type == "ipv6":
+ if "link_local" in PREFERRED_NEXT_HOP:
+ next_hop1 = get_frr_ipv6_linklocal(tgen, peer1, intf=intf1)
+ next_hop2 = get_frr_ipv6_linklocal(tgen, peer2, intf=intf2)
+
+ next_hop_6 = [next_hop1, next_hop2]
+ else:
+ next_hop_6 = NEXT_HOP_6
+
+ result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_6)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 3] : Kill BGPd daemon on R1 and R4..")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ # Kill BGPd daemon on R4
+ kill_router_daemons(tgen, "r4", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ next_hop_6 = ["fd00:0:0:1::1"]
+ if addr_type == "ipv4":
+ next_hop_4 = NEXT_HOP_4[0]
+
+ result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_4)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ if addr_type == "ipv6":
+ if "link_local" in PREFERRED_NEXT_HOP:
+ next_hop_6 = get_frr_ipv6_linklocal(tgen, peer1, intf=intf1)
+ else:
+ next_hop_6 = NEXT_HOP_6[0]
+
+ result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_6)
+
+ # Verifying RIB routes
+ if addr_type == "ipv4":
+ next_hop_4 = NEXT_HOP_4[1]
+ result = verify_rib(
+ tgen, addr_type, dut, input_dict_2, next_hop_4, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ if addr_type == "ipv6":
+ if "link_local" in PREFERRED_NEXT_HOP:
+ next_hop_6 = get_frr_ipv6_linklocal(tgen, peer2, intf=intf2)
+ else:
+ next_hop_6 = NEXT_HOP_6[1]
+
+ result = verify_rib(
+ tgen, addr_type, dut, input_dict_2, next_hop_6, expected=False
+ )
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in ZEBRA\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ logger.info("[Step 4] : Start BGPd daemon on R1 and R4..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ # Start BGPd daemon on R4
+ start_router_daemons(tgen, "r4", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_chaos_34_2_p1(request):
+ """
+ Test Objective : Restarting node doesn't preserve the forwarding
+ state verify the behaviour on helper node, if it still keeps the
+ stale routes.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Test Case : test_BGP_GR_chaos_34 "
+ "BGP GR "
+ "[Restart Mode]R1---R3[Helper Mode]"
+ )
+
+ logger.info("[Step 1] : Configure restarting" " router R1 to prevent ")
+ logger.info("[Step 2] : Reset the session" " between R1 and R3..")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"preserve-fw-state": True, "disable-eor": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verify f-bit before killing BGPd daemon
+ result = verify_f_bit(tgen, topo, addr_type, input_dict, "r3", "r1")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes after starting BGPd daemon
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 3] : Kill BGPd daemon on R1..")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 4] : Withdraw/delete the prefixes " "originated from R1..")
+
+ # Api call to delete advertised networks
+ network = {"ipv4": "101.0.20.1/32", "ipv6": "1::1/128"}
+ for addr_type in ADDR_TYPES:
+ input_dict_2 = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ addr_type: {
+ "unicast": {
+ "advertise_networks": [
+ {
+ "network": network[addr_type],
+ "no_of_network": 5,
+ "delete": True,
+ }
+ ]
+ }
+ }
+ }
+ }
+ }
+ }
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 5] : Remove the CLI from R1's config to " "set the F-bit..")
+
+ # Modify graceful-restart config not to set f-bit
+ # and write to /etc/frr
+ input_dict_2 = {"r1": {"bgp": {"graceful-restart": {"preserve-fw-state": False}}}}
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(tc_name, result)
+
+ logger.info("[Step 6] : Bring up the BGPd daemon on R1 again..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verify f-bit after starting BGPd daemon
+ result = verify_f_bit(
+ tgen, topo, addr_type, input_dict, "r3", "r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r3: F-bit is set to True\n Error: {}".format(
+ tc_name, result
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying BGP RIB routes after starting BGPd daemon
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Graceful Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 7 routers topology
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Graceful Restart on both the routers.
+
+TC_1_2:
+ Verify that EOR message is sent out only after initial convergence
+ Verify whether EOR message is received from all the peers after restart
+TC_3:
+ Verify the selection deferral timer functionality when EOR is not sent
+ by the helper router
+TC_11:
+ Verify that selection-deferral timer sets the maximum time to
+ avoid deadlock during which the best-path
+TC_10:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_15:
+ Test Objective : Test GR scenarios by enabling Graceful Restart
+ for multiple address families..
+TC_16:
+ Test Objective : Verify BGP-GR feature when restarting node
+ is a transit router for it's iBGP peers.
+TC_18:
+ Test Objective : Verify that GR helper router deletes stale routes
+ received from restarting node, if GR capability is not present in
+TC_19:
+ Test Objective : Verify that GR routers keeps all the routes
+ received from restarting node if both the routers are
+TC_26:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_28:
+ Test Objective : Verify if helper node goes down before restarting
+ node comes up online, helper node sets the R-bit to avoid dead-lock
+TC_29:
+ Test Objective : Change timers on the fly, and
+ verify if it takes immediate effect.
+TC_33:
+ Test Objective : Helper router receives same prefixes from two
+ different routers (GR-restarting and GR-disabled). Keeps the
+TC_34_1:
+ Test Objective : Restarting node doesn't preserve forwarding
+ state, helper router should not keep the stale entries.
+TC_34_2:
+ Test Objective : Restarting node doesn't preserve the forwarding
+ state verify the behaviour on helper node, if it still keeps the
+TC_32:
+ Test Objective : Restarting node is connected to multiple helper
+ nodes, one of them doesn't send EOR to restarting router. Verify
+TC_37:
+ Test Objective : Verify if helper node restarts before sending the
+ EOR message, restarting node doesn't wait until stale path timer
+TC_30:
+ Test Objective : Restarting node removes stale routes from Zebra
+ after receiving an EOR from helper router.
+
+"""
+
+import os
+import sys
+import time
+import pytest
+from time import sleep
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_eor,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_gr_address_family,
+ modify_bgp_config_when_bgpd_down,
+ verify_graceful_restart_timers,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 5
+GR_SELECT_DEFER_TIMER = 5
+GR_STALEPATH_TIMER = 5
+PREFERRED_NEXT_HOP = "link_local"
+NEXT_HOP_4 = ["192.168.1.1", "192.168.4.2"]
+NEXT_HOP_6 = ["fd00:0:0:1::1", "fd00:0:0:4::2"]
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ global ADDR_TYPES
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo2.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ for addr_type in ADDR_TYPES:
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ logger.info("configure_gr_followed_by_clear: dut %s peer %s", dut, peer)
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"][dut][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"][peer][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(tgen, dut, peer, addr_type, next_hop_dict):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in PREFERRED_NEXT_HOP:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def test_BGP_GR_chaos_34_1_p1(request):
+ """
+ Test Objective : Restarting node doesn't preserve forwarding
+ state, helper router should not keep the stale entries.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Test Case : test_BGP_GR_chaos_31 "
+ "BGP GR "
+ "[Restart Mode]R1---R3[Helper Mode]"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "preserve-fw-state": True,
+ "timer": {"restart-time": GR_RESTART_TIMER},
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes after starting BGPd daemon
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info(
+ "[Step 1] : Remove the preserve-fw-state command"
+ " from restarting node R1's config"
+ )
+
+ # Configure graceful-restart to set f-bit as False
+ input_dict_2 = {"r1": {"bgp": {"graceful-restart": {"preserve-fw-state": False}}}}
+
+ result = create_router_bgp(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ logger.info("[Step 2] : Reset the session between R1 and R3..")
+
+ # Reset sessions
+ for addr_type in ADDR_TYPES:
+ clear_bgp(tgen, addr_type, "r1")
+
+ result = verify_bgp_convergence_from_running_config(tgen, topo)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ # Verify f-bit after starting BGPd daemon
+ result = verify_f_bit(
+ tgen, topo, addr_type, input_dict_2, "r3", "r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r3: F-bit is set to True\n Error: {}".format(
+ tc_name, result
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ logger.info("[Step 3] : Kill BGPd daemon on R1..")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ # Waiting for GR_RESTART_TIMER
+ logger.info("Waiting for {} sec..".format(GR_RESTART_TIMER))
+ sleep(GR_RESTART_TIMER)
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ input_dict = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_chaos_32_p1(request):
+ """
+ Test Objective : Restarting node is connected to multiple helper
+ nodes, one of them doesn't send EOR to restarting router. Verify
+ that only after SDT restarting node send EOR to all helper peers
+ excluding the prefixes originated by faulty router.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Test Case : test_BGP_GR_chaos_32 "
+ "BGP GR "
+ "[Restart Mode]R1---R3&R5[Helper Mode]"
+ )
+
+ logger.info(
+ "[Step 1] : Change the mode on R1 be a restarting" " node on global level"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"graceful-restart": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"next_hop_self": True}}},
+ "r5": {"dest_link": {"r1": {"graceful-restart": True}}},
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"next_hop_self": True}}},
+ "r5": {"dest_link": {"r1": {"graceful-restart": True}}},
+ }
+ }
+ },
+ },
+ }
+ },
+ "r5": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r5": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r5": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r5")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r5"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes after starting BGPd daemon
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r5"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 2] : Kill BGPd daemon on R1..")
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 3] : Withdraw all the advertised prefixes from R5")
+
+ # Api call to delete advertised networks
+ network = {"ipv4": "105.0.20.1/32", "ipv6": "5::1/128"}
+ for addr_type in ADDR_TYPES:
+ input_dict_2 = {
+ "r5": {
+ "bgp": {
+ "address_family": {
+ addr_type: {
+ "unicast": {
+ "advertise_networks": [
+ {
+ "network": network[addr_type],
+ "no_of_network": 5,
+ "delete": True,
+ }
+ ]
+ }
+ }
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(
+ tc_name, result
+ )
+
+ logger.info(
+ "[Step 4] : Stop the helper router R5 from sending EOR" " message using CLI"
+ )
+
+ # Modify graceful-restart config to prevent sending EOR
+ input_dict_3 = {"r5": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
+
+ result = create_router_bgp(tgen, topo, input_dict_3)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ logger.info("[Step 5] : Bring up the BGPd daemon on R1..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verify EOR is disabled
+ result = verify_eor(
+ tgen, topo, addr_type, input_dict_3, dut="r5", peer="r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r5: EOR is set to TRUE\n Error: {}".format(
+ tc_name, result
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying BGP RIB routes after starting BGPd daemon
+ input_dict_1 = {key: topo["routers"][key] for key in ["r5"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_chaos_37_p1(request):
+ """
+ Test Objective : Verify if helper node restarts before sending the
+ EOR message, restarting node doesn't wait until stale path timer
+ expiry to do the best path selection and sends an EOR
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Test Case : test_BGP_GR_chaos_37 "
+ "BGP GR "
+ "[Restart Mode]R1---R3[Helper Mode]"
+ )
+
+ logger.info(
+ "[Step 1] : Configure restarting router R3 to prevent " "sending an EOR.."
+ )
+
+ logger.info("[Step 2] : Reset the session between R3 and R1..")
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "graceful-restart": {"disable-eor": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verify EOR is disabled
+ result = verify_eor(
+ tgen, topo, addr_type, input_dict, dut="r3", peer="r1", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r3: EOR is set to True\n Error: {}".format(
+ tc_name, result
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying BGP RIB routes after starting BGPd daemon
+ dut = "r1"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 3] : Kill BGPd daemon on R1..")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 4] : Start BGPd daemon on R1..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 5] : Kill BGPd daemon on R3..")
+
+ # Kill BGPd daemon on R3
+ kill_router_daemons(tgen, "r3", ["bgpd"])
+
+ # Modify graceful-restart config to prevent sending EOR
+ input_dict_2 = {"r3": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(tc_name, result)
+
+ logger.info("[Step 6] : Start BGPd daemon on R3..")
+
+ # Start BGPd daemon on R3
+ start_router_daemons(tgen, "r3", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verify r_bit
+ result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r3")
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verify EOR is send from R1 to R3
+ input_dict_3 = {"r1": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
+
+ result = verify_eor(
+ tgen, topo, addr_type, input_dict_3, dut="r1", peer="r3", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r1: EOR is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_chaos_30_p1(request):
+ """
+ Test Objective : Restarting node removes stale routes from Zebra
+ after receiving an EOR from helper router.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Test Case : test_BGP_GR_chaos_30 "
+ "BGP GR [Helper Mode]R3-----R1[Restart Mode] "
+ )
+
+ # Configure graceful-restart and timers
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"preserve-fw-state": True},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes before shutting down BGPd daemon
+ dut = "r1"
+ input_dict = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 2] : Kill BGPd daemon on R1..")
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ logger.info("[Step 3] : Withdraw advertised prefixes from R3...")
+
+ # Api call to delete advertised networks
+ network = {"ipv4": "103.0.20.1/32", "ipv6": "3::1/128"}
+ for addr_type in ADDR_TYPES:
+ input_dict = {
+ "r3": {
+ "bgp": {
+ "address_family": {
+ addr_type: {
+ "unicast": {
+ "advertise_networks": [
+ {
+ "network": network[addr_type],
+ "no_of_network": 5,
+ "delete": True,
+ }
+ ]
+ }
+ }
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(
+ tc_name, result
+ )
+
+ logger.info("[Step 4] : Start BGPd daemon on R1..")
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes before shutting down BGPd daemon
+ input_dict = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_15_p2(request):
+ """
+ Test Objective : Test GR scenarios by enabling Graceful Restart
+ for multiple address families..
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r6": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r6": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r6": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r6")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r6"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info(
+ "[Step 2] : Test Setup "
+ "[Helper Mode]R6-----R1[Restart Mode]"
+ "--------R2[Helper Mode] Initilized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r2": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ result = verify_bgp_convergence(tgen, topo)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+def BGP_GR_TC_7_p1(request):
+ """
+ Verify that BGP restarting node deletes all the routes received from peer
+ if BGP Graceful capability is not present in BGP Open message from the
+ peer
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ " Verify route download to RIB: BGP_GR_TC_7 >> "
+ "BGP GR [Helper Mode]R3-----R1[Restart Mode] "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r1": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "preserve-fw-state": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes received from router R1
+ dut = "r1"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info("R1 goes for reload")
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ # Change the configuration on router R1
+ input_dict_2 = {
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ # Change the configuration on R1
+ network = {"ipv4": "103.0.20.1/32", "ipv6": "3::1/128"}
+ for addr_type in ADDR_TYPES:
+ input_dict_2 = {
+ "r3": {
+ "bgp": {
+ "address_family": {
+ addr_type: {
+ "unicast": {
+ "advertise_networks": [
+ {
+ "network": network[addr_type],
+ "no_of_network": 5,
+ "delete": True,
+ }
+ ]
+ }
+ }
+ }
+ }
+ }
+ }
+
+ result = create_router_bgp(tgen, topo, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info("R1 is about to come up now")
+ start_router_daemons(tgen, "r1", ["bgpd"])
+ logger.info("R1 is UP Now")
+
+ # Wait for RIB stale timeout
+ logger.info("Verify routes are not present" "in restart router")
+
+ for addr_type in ADDR_TYPES:
+ # Verifying RIB routes
+ dut = "r1"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
+ result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
--- /dev/null
+#!/usr/bin/env python
+#
+# Copyright (c) 2019 by VMware, Inc. ("VMware")
+# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
+# in this file.
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+Following tests are covered to test BGP Graceful Restart functionality.
+Basic Common Test steps for all the test case below :
+- Create topology (setup module)
+ Creating 7 routers topology
+- Bring up topology
+- Verify for bgp to converge
+- Configure BGP Graceful Restart on both the routers.
+
+TC_1_2:
+ Verify that EOR message is sent out only after initial convergence
+ Verify whether EOR message is received from all the peers after restart
+TC_3:
+ Verify the selection deferral timer functionality when EOR is not sent
+ by the helper router
+TC_11:
+ Verify that selection-deferral timer sets the maximum time to
+ avoid deadlock during which the best-path
+TC_10:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_15:
+ Test Objective : Test GR scenarios by enabling Graceful Restart
+ for multiple address families..
+TC_16:
+ Test Objective : Verify BGP-GR feature when restarting node
+ is a transit router for it's iBGP peers.
+TC_18:
+ Test Objective : Verify that GR helper router deletes stale routes
+ received from restarting node, if GR capability is not present in
+TC_19:
+ Test Objective : Verify that GR routers keeps all the routes
+ received from restarting node if both the routers are
+TC_26:
+ Test Objective : Test GR scenarios on helper router by enabling
+ Graceful Restart for multiple address families.
+TC_28:
+ Test Objective : Verify if helper node goes down before restarting
+ node comes up online, helper node sets the R-bit to avoid dead-lock
+TC_29:
+ Test Objective : Change timers on the fly, and
+ verify if it takes immediate effect.
+TC_33:
+ Test Objective : Helper router receives same prefixes from two
+ different routers (GR-restarting and GR-disabled). Keeps the
+TC_34_1:
+ Test Objective : Restarting node doesn't preserve forwarding
+ state, helper router should not keep the stale entries.
+TC_34_2:
+ Test Objective : Restarting node doesn't preserve the forwarding
+ state verify the behaviour on helper node, if it still keeps the
+TC_32:
+ Test Objective : Restarting node is connected to multiple helper
+ nodes, one of them doesn't send EOR to restarting router. Verify
+TC_37:
+ Test Objective : Verify if helper node restarts before sending the
+ EOR message, restarting node doesn't wait until stale path timer
+TC_30:
+ Test Objective : Restarting node removes stale routes from Zebra
+ after receiving an EOR from helper router.
+
+These tests have been broken up into 4 sub python scripts because
+the totality of run time for this script was greater than 10 minutes
+"""
+
+import os
+import sys
+import time
+import pytest
+from time import sleep
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join("../"))
+sys.path.append(os.path.join("../lib/"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib.topogen import Topogen, get_topogen
+from lib.topolog import logger
+
+# Required to instantiate the topology builder class.
+
+# Import topoJson from lib, to create topology and initial configuration
+from lib.topojson import build_config_from_json
+from lib.bgp import (
+ clear_bgp,
+ verify_bgp_rib,
+ verify_graceful_restart,
+ create_router_bgp,
+ verify_r_bit,
+ verify_eor,
+ verify_f_bit,
+ verify_bgp_convergence,
+ verify_gr_address_family,
+ modify_bgp_config_when_bgpd_down,
+ verify_graceful_restart_timers,
+ verify_bgp_convergence_from_running_config,
+)
+
+from lib.common_config import (
+ write_test_header,
+ reset_config_on_routers,
+ start_topology,
+ kill_router_daemons,
+ start_router_daemons,
+ verify_rib,
+ check_address_types,
+ write_test_footer,
+ check_router_status,
+ step,
+ get_frr_ipv6_linklocal,
+ required_linux_kernel_version,
+)
+
+pytestmark = [pytest.mark.bgpd]
+
+
+# Global variables
+BGP_CONVERGENCE = False
+GR_RESTART_TIMER = 5
+GR_SELECT_DEFER_TIMER = 5
+GR_STALEPATH_TIMER = 5
+PREFERRED_NEXT_HOP = "link_local"
+NEXT_HOP_4 = ["192.168.1.1", "192.168.4.2"]
+NEXT_HOP_6 = ["fd00:0:0:1::1", "fd00:0:0:4::2"]
+
+
+def setup_module(mod):
+ """
+ Sets up the pytest environment
+
+ * `mod`: module name
+ """
+
+ # Required linux kernel version for this suite to run.
+ result = required_linux_kernel_version("4.16")
+ if result is not True:
+ pytest.skip("Kernel requirements are not met")
+
+ global ADDR_TYPES
+
+ testsuite_run_time = time.asctime(time.localtime(time.time()))
+ logger.info("Testsuite start time: {}".format(testsuite_run_time))
+ logger.info("=" * 40)
+
+ logger.info("Running setup_module to create topology")
+
+ # This function initiates the topology build with Topogen...
+ json_file = "{}/bgp_gr_topojson_topo2.json".format(CWD)
+ tgen = Topogen(json_file, mod.__name__)
+ global topo
+ topo = tgen.json_topo
+ # ... and here it calls Mininet initialization functions.
+
+ # Starting topology, create tmp files which are loaded to routers
+ # to start deamons and then start routers
+ start_topology(tgen)
+
+ # Creating configuration from JSON
+ build_config_from_json(tgen, topo)
+
+ # Api call verify whether BGP is converged
+ ADDR_TYPES = check_address_types()
+
+ for addr_type in ADDR_TYPES:
+ BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
+ assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
+ BGP_CONVERGENCE
+ )
+
+ logger.info("Running setup_module() done")
+
+
+def teardown_module(mod):
+ """
+ Teardown the pytest environment
+
+ * `mod`: module name
+ """
+
+ logger.info("Running teardown_module to delete topology")
+
+ tgen = get_topogen()
+
+ # Stop toplogy and Remove tmp files
+ tgen.stop_topology()
+
+ logger.info(
+ "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
+ )
+ logger.info("=" * 40)
+
+
+def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
+ """
+ This function groups the repetitive function calls into one function.
+ """
+
+ logger.info("configure_gr_followed_by_clear: dut %s peer %s", dut, peer)
+
+ result = create_router_bgp(tgen, topo, input_dict)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][peer]["links"][dut][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
+
+ for addr_type in ADDR_TYPES:
+ neighbor = topo["routers"][dut]["links"][peer][addr_type].split("/")[0]
+ clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
+
+ result = verify_bgp_convergence_from_running_config(tgen)
+ assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
+
+ return True
+
+
+def next_hop_per_address_family(tgen, dut, peer, addr_type, next_hop_dict):
+ """
+ This function returns link_local or global next_hop per address-family
+ """
+
+ intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
+ if addr_type == "ipv6" and "link_local" in PREFERRED_NEXT_HOP:
+ next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
+ else:
+ next_hop = next_hop_dict[addr_type]
+
+ return next_hop
+
+
+def test_BGP_GR_TC_23_p1(request):
+ """
+ Verify that helper routers are deleting stale routes after stale route
+ timer's expiry. If all the routes are not received from restating node
+ after restart.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "Verify Stale Routes are deleted on helper: BGP_GR_TC_23 >> "
+ "BGP GR [Helper Mode]R1-----R2[Restart Mode] "
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "graceful-restart": {"timer": {"stalepath-time": GR_STALEPATH_TIMER}},
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ },
+ }
+ },
+ "r2": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ "preserve-fw-state": True,
+ },
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
+ }
+ }
+ },
+ },
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes received from router R1
+ dut = "r1"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info("R2 goes for reload")
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ # Modify configuration to delete routes and include disable-eor
+ input_dict_3 = {"r2": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
+
+ # Modify configuration to delete routes and include disable-eor
+ network = {"ipv4": "102.0.20.1/32", "ipv6": "2::1/128"}
+ for addr_type in ADDR_TYPES:
+ input_dict_3 = {
+ "r2": {
+ "bgp": {
+ "address_family": {
+ addr_type: {
+ "unicast": {
+ "advertise_networks": [
+ {
+ "network": network[addr_type],
+ "no_of_network": 3,
+ "delete": True,
+ }
+ ]
+ }
+ }
+ }
+ }
+ }
+ }
+
+ result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info("BGPd comes up for r2")
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ # Wait for stalepath timer
+ logger.info("Waiting for stalepath timer({} sec..)".format(GR_STALEPATH_TIMER))
+ sleep(GR_STALEPATH_TIMER)
+
+ for addr_type in ADDR_TYPES:
+ clear_bgp(tgen, addr_type, "r2")
+
+ # Verifying RIB routes
+ dut = "r1"
+ network = {"ipv4": "102.0.20.4/32", "ipv6": "2::4/128"}
+ for addr_type in ADDR_TYPES:
+ input_dict_1 = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ addr_type: {
+ "unicast": {
+ "advertise_networks": [
+ {"network": network[addr_type], "no_of_network": 2}
+ ]
+ }
+ }
+ }
+ }
+ }
+ }
+
+ # Verify EOR on helper router
+ result = verify_eor(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2", expected=False
+ )
+ assert (
+ result is not True
+ ), "Testcase {} : Failed \n " "r1: EOR is set to True\n Error: {}".format(
+ tc_name, result
+ )
+
+ # Verifying BGP RIB routes received from router R1
+ dut = "r1"
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_20_p1(request):
+ """
+ Test Objective : Verify that GR routers delete all the routes
+ received from a node if both the routers are configured as GR
+ helper node
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Step 1] : Test Setup " "[Restart Mode]R3-----R1[Restart Mode] Initilized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in BGP RIB\n Error: {}".format(
+ tc_name, result
+ )
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
+ assert result is not True, (
+ "Testcase {} : Failed \n "
+ "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
+ )
+ logger.info(" Expected behavior: {}".format(result))
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r1", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ result = verify_bgp_convergence(tgen, topo)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_21_p2(request):
+ """
+ Test Objective : VVerify BGP-GR feature when helper node is
+ a transit router for it's eBGP peers.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Step 1] : Test Setup " "[Helper Mode]R6-----R1[Restart Mode] Initilized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r6": {
+ "dest_link": {
+ "r1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r6": {
+ "dest_link": {
+ "r1": {"graceful-restart-disable": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r6": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r6": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r6": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r6")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r6"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info(
+ "[Step 2] : Test Setup "
+ "[Restart Mode]R2-----[Helper Mode]R1[Disable Mode]"
+ "--------R6[Helper Mode] Initilized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {
+ "bgp": {
+ "graceful-restart": {
+ "graceful-restart": True,
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ result = verify_bgp_convergence(tgen, topo)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes after bringing up BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r6"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+def test_BGP_GR_22_p2(request):
+ """
+ Test Objective : Verify BGP-GR feature when helper node
+ is a transit router for it's iBGP peers.
+ """
+
+ tgen = get_topogen()
+ tc_name = request.node.name
+ write_test_header(tc_name)
+
+ # Check router status
+ check_router_status(tgen)
+
+ # Don't run this test if we have any failure.
+ if tgen.routers_have_failure():
+ pytest.skip(tgen.errors)
+
+ # Creating configuration from JSON
+ reset_config_on_routers(tgen)
+
+ logger.info(
+ "[Step 1] : Test Setup " "[Helper Mode]R3-----R1[Restart Mode] Initilized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "graceful-restart-disable": True,
+ "next_hop_self": True,
+ }
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r3": {
+ "dest_link": {
+ "r1": {
+ "graceful-restart-disable": True,
+ "next_hop_self": True,
+ }
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r3": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r1": {
+ "dest_link": {
+ "r3": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ logger.info(
+ "[Step 2] : Test Setup "
+ "[Restart Mode]R2-----[Helper Mode]R1[Disable Mode]"
+ "--------R3[Helper Mode] Initilized"
+ )
+
+ # Configure graceful-restart
+ input_dict = {
+ "r1": {
+ "bgp": {
+ "address_family": {
+ "ipv4": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ "ipv6": {
+ "unicast": {
+ "neighbor": {
+ "r2": {
+ "dest_link": {
+ "r1": {"graceful-restart-helper": True}
+ }
+ }
+ }
+ }
+ },
+ }
+ }
+ },
+ "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
+ }
+
+ configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
+
+ for addr_type in ADDR_TYPES:
+ result = verify_graceful_restart(
+ tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
+ )
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Kill BGPd daemon on R1
+ kill_router_daemons(tgen, "r2", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Start BGPd daemon on R1
+ start_router_daemons(tgen, "r2", ["bgpd"])
+
+ for addr_type in ADDR_TYPES:
+ result = verify_bgp_convergence(tgen, topo)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_1)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying BGP RIB routes
+ dut = "r3"
+ input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
+ result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ # Verifying RIB routes before shutting down BGPd daemon
+ result = verify_rib(tgen, addr_type, dut, input_dict_2)
+ assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
+
+ write_test_footer(tc_name)
+
+
+if __name__ == "__main__":
+ args = ["-s"] + sys.argv[1:]
+ sys.exit(pytest.main(args))
+++ /dev/null
-#!/usr/bin/env python
-#
-# Copyright (c) 2019 by VMware, Inc. ("VMware")
-# Used Copyright (c) 2018 by Network Device Education Foundation, Inc. ("NetDEF")
-# in this file.
-#
-# Permission to use, copy, modify, and/or distribute this software
-# for any purpose with or without fee is hereby granted, provided
-# that the above copyright notice and this permission notice appear
-# in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND VMWARE DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL VMWARE BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
-# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
-# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
-# OF THIS SOFTWARE.
-#
-
-"""
-Following tests are covered to test BGP Graceful Restart functionality.
-Basic Common Test steps for all the test case below :
-- Create topology (setup module)
- Creating 7 routers topology
-- Bring up topology
-- Verify for bgp to converge
-- Configure BGP Graceful Restart on both the routers.
-
-TC_1_2:
- Verify that EOR message is sent out only after initial convergence
- Verify whether EOR message is received from all the peers after restart
-TC_3:
- Verify the selection deferral timer functionality when EOR is not sent
- by the helper router
-TC_11:
- Verify that selection-deferral timer sets the maximum time to
- avoid deadlock during which the best-path
-TC_10:
- Test Objective : Test GR scenarios on helper router by enabling
- Graceful Restart for multiple address families.
-TC_15:
- Test Objective : Test GR scenarios by enabling Graceful Restart
- for multiple address families..
-TC_16:
- Test Objective : Verify BGP-GR feature when restarting node
- is a transit router for it's iBGP peers.
-TC_18:
- Test Objective : Verify that GR helper router deletes stale routes
- received from restarting node, if GR capability is not present in
-TC_19:
- Test Objective : Verify that GR routers keeps all the routes
- received from restarting node if both the routers are
-TC_26:
- Test Objective : Test GR scenarios on helper router by enabling
- Graceful Restart for multiple address families.
-TC_28:
- Test Objective : Verify if helper node goes down before restarting
- node comes up online, helper node sets the R-bit to avoid dead-lock
-TC_29:
- Test Objective : Change timers on the fly, and
- verify if it takes immediate effect.
-TC_33:
- Test Objective : Helper router receives same prefixes from two
- different routers (GR-restarting and GR-disabled). Keeps the
-TC_34_1:
- Test Objective : Restarting node doesn't preserve forwarding
- state, helper router should not keep the stale entries.
-TC_34_2:
- Test Objective : Restarting node doesn't preserve the forwarding
- state verify the behaviour on helper node, if it still keeps the
-TC_32:
- Test Objective : Restarting node is connected to multiple helper
- nodes, one of them doesn't send EOR to restarting router. Verify
-TC_37:
- Test Objective : Verify if helper node restarts before sending the
- EOR message, restarting node doesn't wait until stale path timer
-TC_30:
- Test Objective : Restarting node removes stale routes from Zebra
- after receiving an EOR from helper router.
-
-"""
-
-import os
-import sys
-import time
-import pytest
-from time import sleep
-
-# Save the Current Working Directory to find configuration files.
-CWD = os.path.dirname(os.path.realpath(__file__))
-sys.path.append(os.path.join("../"))
-sys.path.append(os.path.join("../lib/"))
-
-# pylint: disable=C0413
-# Import topogen and topotest helpers
-from lib.topogen import Topogen, get_topogen
-from lib.topolog import logger
-
-# Required to instantiate the topology builder class.
-
-# Import topoJson from lib, to create topology and initial configuration
-from lib.topojson import build_config_from_json
-from lib.bgp import (
- clear_bgp,
- verify_bgp_rib,
- verify_graceful_restart,
- create_router_bgp,
- verify_r_bit,
- verify_eor,
- verify_f_bit,
- verify_bgp_convergence,
- verify_gr_address_family,
- modify_bgp_config_when_bgpd_down,
- verify_graceful_restart_timers,
- verify_bgp_convergence_from_running_config,
-)
-
-from lib.common_config import (
- write_test_header,
- reset_config_on_routers,
- start_topology,
- kill_router_daemons,
- start_router_daemons,
- verify_rib,
- check_address_types,
- write_test_footer,
- check_router_status,
- step,
- get_frr_ipv6_linklocal,
- required_linux_kernel_version,
-)
-
-pytestmark = [pytest.mark.bgpd]
-
-
-# Global variables
-BGP_CONVERGENCE = False
-GR_RESTART_TIMER = 5
-GR_SELECT_DEFER_TIMER = 5
-GR_STALEPATH_TIMER = 5
-PREFERRED_NEXT_HOP = "link_local"
-NEXT_HOP_4 = ["192.168.1.1", "192.168.4.2"]
-NEXT_HOP_6 = ["fd00:0:0:1::1", "fd00:0:0:4::2"]
-
-
-def setup_module(mod):
- """
- Sets up the pytest environment
-
- * `mod`: module name
- """
-
- # Required linux kernel version for this suite to run.
- result = required_linux_kernel_version("4.16")
- if result is not True:
- pytest.skip("Kernel requirements are not met")
-
- global ADDR_TYPES
-
- testsuite_run_time = time.asctime(time.localtime(time.time()))
- logger.info("Testsuite start time: {}".format(testsuite_run_time))
- logger.info("=" * 40)
-
- logger.info("Running setup_module to create topology")
-
- # This function initiates the topology build with Topogen...
- json_file = "{}/bgp_gr_topojson_topo2.json".format(CWD)
- tgen = Topogen(json_file, mod.__name__)
- global topo
- topo = tgen.json_topo
- # ... and here it calls Mininet initialization functions.
-
- # Starting topology, create tmp files which are loaded to routers
- # to start deamons and then start routers
- start_topology(tgen)
-
- # Creating configuration from JSON
- build_config_from_json(tgen, topo)
-
- # Api call verify whether BGP is converged
- ADDR_TYPES = check_address_types()
-
- for addr_type in ADDR_TYPES:
- BGP_CONVERGENCE = verify_bgp_convergence(tgen, topo)
- assert BGP_CONVERGENCE is True, "setup_module : Failed \n Error:" " {}".format(
- BGP_CONVERGENCE
- )
-
- logger.info("Running setup_module() done")
-
-
-def teardown_module(mod):
- """
- Teardown the pytest environment
-
- * `mod`: module name
- """
-
- logger.info("Running teardown_module to delete topology")
-
- tgen = get_topogen()
-
- # Stop toplogy and Remove tmp files
- tgen.stop_topology()
-
- logger.info(
- "Testsuite end time: {}".format(time.asctime(time.localtime(time.time())))
- )
- logger.info("=" * 40)
-
-
-def configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut, peer):
- """
- This function groups the repetitive function calls into one function.
- """
-
- logger.info("configure_gr_followed_by_clear: dut %s peer %s", dut, peer)
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"][peer]["links"][dut][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, dut, neighbor=neighbor)
-
- for addr_type in ADDR_TYPES:
- neighbor = topo["routers"][dut]["links"][peer][addr_type].split("/")[0]
- clear_bgp(tgen, addr_type, peer, neighbor=neighbor)
-
- result = verify_bgp_convergence_from_running_config(tgen)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- return True
-
-
-def next_hop_per_address_family(tgen, dut, peer, addr_type, next_hop_dict):
- """
- This function returns link_local or global next_hop per address-family
- """
-
- intferface = topo["routers"][peer]["links"]["{}-link1".format(dut)]["interface"]
- if addr_type == "ipv6" and "link_local" in PREFERRED_NEXT_HOP:
- next_hop = get_frr_ipv6_linklocal(tgen, peer, intf=intferface)
- else:
- next_hop = next_hop_dict[addr_type]
-
- return next_hop
-
-
-def test_BGP_GR_TC_1_2_p0(request):
- """
- Verify that EOR message is sent out only after initial convergence
- Verify whether EOR message is received from all the peers after restart
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "Verify EOR Sent and Received : BGP_GR_TC_1_2 >> "
- "BGP GR [Helper Mode]R3-----R1[Restart Mode] "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "preserve-fw-state": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes received from router R3
- dut = "r1"
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("R1 goes for reload")
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("Starting bgpd process")
- start_router_daemons(tgen, "r1", ["bgpd"])
- logger.info("R1 is UP Now")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes received from router R3
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying EOR on restarting router
- result = verify_eor(tgen, topo, addr_type, input_dict, dut="r3", peer="r1")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_3_p0(request):
- """
- Verify the selection deferral timer functionality when EOR is not sent
- by the helper router
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Verify route download to RIB: BGP_GR_TC_3 >> "
- "BGP GR [Helper Mode]R1-----R2[Restart Mode] "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "disable-eor": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "preserve-fw-state": True,
- "timer": {"select-defer-time": GR_SELECT_DEFER_TIMER},
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes received from router R1
- dut = "r2"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("R2 goes for reload ")
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- logger.info("R2 is about to come up now")
- start_router_daemons(tgen, "r2", ["bgpd"])
- logger.info("R2 is UP Now")
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes received from router R1
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verify EOR on restarting router
- result = verify_eor(
- tgen, topo, addr_type, input_dict, dut="r2", peer="r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r2: EOR is set to True\n Error: {}".format(
- tc_name, result
- )
-
- logger.info(
- "Waiting for selection deferral timer({} sec)..".format(GR_SELECT_DEFER_TIMER)
- )
- sleep(GR_SELECT_DEFER_TIMER)
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, "r2", input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_11_p0(request):
- """
- Verify that selection-deferral timer sets the maximum time to
- avoid deadlock during which the best-path
- selection process is deferred, after a peer session was restarted
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info("Verify EOR Sent after deferral timeout : BGP_GR_TC_11")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "select-defer-time": GR_SELECT_DEFER_TIMER,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}},
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}},
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}},
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}},
- }
- }
- },
- },
- }
- },
- "r3": {
- "bgp": {
- "graceful-restart": {"disable-eor": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- clear_bgp(tgen, addr_type, "r1")
- clear_bgp(tgen, addr_type, "r3")
-
- result = verify_bgp_convergence_from_running_config(tgen, topo)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes received from router R1
- dut = "r1"
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("R1 goes for reload")
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("Starting bgpd process")
- start_router_daemons(tgen, "r1", ["bgpd"])
- logger.info("R1 is UP Now")
-
- for addr_type in ADDR_TYPES:
- # Verify EOR on restarting router
- result = verify_eor(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r1: EOR is set to True\n Error: {}".format(
- tc_name, result
- )
-
- logger.info(
- "Waiting for selection deferral timer({} sec).. ".format(
- GR_SELECT_DEFER_TIMER + 2
- )
- )
- sleep(GR_SELECT_DEFER_TIMER + 2)
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes received from router R1
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying EOR on restarting router
- result = verify_eor(
- tgen, topo, addr_type, input_dict, dut="r3", peer="r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r3: EOR is set to True\n Error: {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_10_p2(request):
- """
- Test Objective : Test GR scenarios on helper router by enabling
- Graceful Restart for multiple address families.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- step("Test Setup: [Helper Mode]R3-----R1[Restart Mode] initialized")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "next_hop_self": True,
- "graceful-restart": True,
- "activate": "ipv6",
- }
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "next_hop_self": True,
- "graceful-restart": True,
- "activate": "ipv4",
- }
- }
- }
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {
- "graceful-restart-helper": True,
- "activate": "ipv6",
- }
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {
- "graceful-restart-helper": True,
- "activate": "ipv4",
- }
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- step(
- "Verifying GR config and operational state for addr_type {}".format(
- addr_type
- )
- )
-
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_topo = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv4Unicast",
- dut="r1",
- peer="r3",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv6Unicast",
- dut="r1",
- peer="r3",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv4Unicast",
- dut="r3",
- peer="r1",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv6Unicast",
- dut="r3",
- peer="r1",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Killing bgpd on r1")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- input_topo = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- step("Starting bgpd on r1")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- input_topo = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def BGP_GR_16_p2(request):
- """
- Test Objective : Verify BGP-GR feature when restarting node
- is a transit router for it's iBGP peers.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Step 1] : Test Setup " "[Helper Mode]R3-----R1[Restart Mode] initialized"
- )
-
- # Configure graceful-restart and timers
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "graceful-restart": True,
- "next_hop_self": True,
- }
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "graceful-restart": True,
- "next_hop_self": True,
- }
- }
- }
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info(
- "[Step 2] : Test Setup "
- "[Helper Mode]R3-----R1[Restart Mode]"
- "--------R6[Helper Mode] initialized"
- )
-
- # Configure graceful-restart and timers
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- result = verify_bgp_convergence_from_running_config(tgen, topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_18_p1(request):
- """
- Test Objective : Verify that GR helper router deletes stale routes
- received from restarting node, if GR capability is not present in
- restarting node's OPEN message.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Step 1] : Test Setup " "[Helper Mode]R6-----R1[Restart Mode] initialized"
- )
-
- # Configure graceful-restart and timers
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r6": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r6": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r6": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r6")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r6"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info(
- "[Step 2] : Test Setup "
- "[Helper Mode]R6-----R1[Restart Mode]"
- "--------R2[Helper Mode] initialized"
- )
-
- # Configure graceful-restart and timers
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r2"
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 3] : Configure R1 to prevent sending EOR")
-
- # Modify graceful-restart config to prevent sending EOR
- input_dict_3 = {"r1": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
-
- # Modify configuration to delete routes
- network = {"ipv4": "101.0.20.1/32", "ipv6": "1::1/128"}
- for addr_type in ADDR_TYPES:
- input_dict_3 = {
- "r1": {
- "bgp": {
- "address_family": {
- addr_type: {
- "unicast": {
- "advertise_networks": [
- {
- "network": network[addr_type],
- "no_of_network": 5,
- "delete": True,
- }
- ]
- }
- }
- }
- }
- }
- }
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Modify graceful-restart config
- input_dict_3 = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-disable": True}
- }
- },
- "r6": {
- "dest_link": {
- "r1": {"graceful-restart-disable": True}
- }
- },
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-disable": True}
- }
- },
- "r6": {
- "dest_link": {
- "r1": {"graceful-restart-disable": True}
- }
- },
- }
- }
- },
- }
- }
- }
- }
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
- assert result is True, "Testcase {} : Failed \n Error {}".format(tc_name, result)
-
- logger.info("[Step 4] : Bring up the BGPd daemon on R1 for 30" " seconds..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r6: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r6: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying BGP RIB routes
- dut = "r2"
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r2: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r6: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_26_p2(request):
- """
- Test Objective : Test GR scenarios on helper router by enabling
- Graceful Restart for multiple address families.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Step 1] : Test Setup " "[Helper Mode]R3-----R1[Restart Mode] initialized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "graceful-restart": True,
- "next_hop_self": True,
- "activate": "ipv6",
- }
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "graceful-restart": True,
- "next_hop_self": True,
- "activate": "ipv4",
- }
- }
- }
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {
- "graceful-restart-helper": True,
- "activate": "ipv6",
- }
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {
- "graceful-restart-helper": True,
- "activate": "ipv4",
- }
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r3", peer="r1"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_topo = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- input_topo = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- input_topo = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_topo)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv4Unicast",
- dut="r1",
- peer="r3",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv6Unicast",
- dut="r1",
- peer="r3",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv4Unicast",
- dut="r3",
- peer="r1",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # verify multi address family
- result = verify_gr_address_family(
- tgen,
- topo,
- addr_type,
- "ipv6Unicast",
- dut="r3",
- peer="r1",
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_28_p1(request):
- """
- Test Objective : Verify if helper node goes down before restarting
- node comes up online, helper node sets the R-bit to avoid dead-lock
- till SDT expiry.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "Test Case: test_BGP_GR_chaos_28 :"
- "[Helper Mode]R3-----R1[Restart Mode] initialized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 1] : Kill BGPd daemon on R1..")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 2] : Kill BGPd daemon on R3..")
-
- # Kill BGPd daemon on R3
- kill_router_daemons(tgen, "r3", ["bgpd"])
-
- logger.info("[Step 3] : Start BGPd daemon on R1..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 4] : Start BGPd daemon on R3..")
-
- # Start BGPd daemon on R3
- start_router_daemons(tgen, "r3", ["bgpd"])
-
- # Verify r_bit
- for addr_type in ADDR_TYPES:
- result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r3", peer="r1")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_29_p1(request):
- """
- Test Objective : Change timers on the fly, and
- verify if it takes immediate effect.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Test Case : test_BGP_GR_chaos_29"
- " BGP GR [Helper Mode]R3-----R1[Restart Mode]"
- " and [restart-time 150]R1 initialized"
- )
-
- # Configure graceful-restart and timers
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {"timer": {"restart-time": GR_RESTART_TIMER}},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verify graceful-restart timers
- input_dict_2 = {
- "r1": {
- "bgp": {
- "graceful-restart": {"timer": {"restart-time": GR_RESTART_TIMER + 5}}
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- input_dict_2 = {
- "r1": {
- "bgp": {
- "graceful-restart": {"timer": {"restart-time": GR_RESTART_TIMER}}
- }
- }
- }
-
- result = verify_graceful_restart_timers(
- tgen, topo, addr_type, input_dict_2, dut="r3", peer="r1"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes before shutting down BGPd daemon
- dut = "r3"
- input_dict = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 2] : Kill BGPd daemon on R1..")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 3] : Wait for {} seconds..".format(GR_RESTART_TIMER))
-
- # Waiting for GR_RESTART_TIMER
- sleep(GR_RESTART_TIMER)
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes before shutting down BGPd daemon
- input_dict = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- logger.info("[Step 4] : Start BGPd daemon on R1..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_33_p1(request):
- """
- Test Objective : Helper router receives same prefixes from two
- different routers (GR-restarting and GR-disabled). Keeps the
- stale entry only for GR-restarting node(next-hop is correct).
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Test Case : test_BGP_GR_chaos_33 "
- "BGP GR "
- "[Restart Mode]R1--R3[Helper Mode]--R4[Disabled Mode]"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r4": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r4": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r4": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 2] : Advertise same networks from R1 and R4..")
-
- # Api call to delete advertised networks
- input_dict_2 = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "advertise_networks": [
- {
- "network": "200.0.20.1/32",
- "no_of_network": 2,
- }
- ]
- }
- },
- "ipv6": {
- "unicast": {
- "advertise_networks": [
- {"network": "2001::1/128", "no_of_network": 2}
- ]
- }
- },
- }
- }
- },
- "r4": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "advertise_networks": [
- {"network": "200.0.20.1/32", "no_of_network": 2}
- ]
- }
- },
- "ipv6": {
- "unicast": {
- "advertise_networks": [
- {"network": "2001::1/128", "no_of_network": 2}
- ]
- }
- },
- }
- }
- },
- }
-
- result = create_router_bgp(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- dut = "r3"
- peer1 = "r1"
- peer2 = "r4"
- intf1 = topo["routers"][peer1]["links"][dut]["interface"]
- intf2 = topo["routers"][peer2]["links"][dut]["interface"]
-
- if addr_type == "ipv4":
- next_hop_4 = NEXT_HOP_4
- result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_4)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- if addr_type == "ipv6":
- if "link_local" in PREFERRED_NEXT_HOP:
- next_hop1 = get_frr_ipv6_linklocal(tgen, peer1, intf=intf1)
- next_hop2 = get_frr_ipv6_linklocal(tgen, peer2, intf=intf2)
-
- next_hop_6 = [next_hop1, next_hop2]
- else:
- next_hop_6 = NEXT_HOP_6
-
- result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_6)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 3] : Kill BGPd daemon on R1 and R4..")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- # Kill BGPd daemon on R4
- kill_router_daemons(tgen, "r4", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- next_hop_6 = ["fd00:0:0:1::1"]
- if addr_type == "ipv4":
- next_hop_4 = NEXT_HOP_4[0]
-
- result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_4)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- if addr_type == "ipv6":
- if "link_local" in PREFERRED_NEXT_HOP:
- next_hop_6 = get_frr_ipv6_linklocal(tgen, peer1, intf=intf1)
- else:
- next_hop_6 = NEXT_HOP_6[0]
-
- result = verify_rib(tgen, addr_type, dut, input_dict_2, next_hop_6)
-
- # Verifying RIB routes
- if addr_type == "ipv4":
- next_hop_4 = NEXT_HOP_4[1]
- result = verify_rib(
- tgen, addr_type, dut, input_dict_2, next_hop_4, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- if addr_type == "ipv6":
- if "link_local" in PREFERRED_NEXT_HOP:
- next_hop_6 = get_frr_ipv6_linklocal(tgen, peer2, intf=intf2)
- else:
- next_hop_6 = NEXT_HOP_6[1]
-
- result = verify_rib(
- tgen, addr_type, dut, input_dict_2, next_hop_6, expected=False
- )
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in ZEBRA\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- logger.info("[Step 4] : Start BGPd daemon on R1 and R4..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- # Start BGPd daemon on R4
- start_router_daemons(tgen, "r4", ["bgpd"])
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_34_2_p1(request):
- """
- Test Objective : Restarting node doesn't preserve the forwarding
- state verify the behaviour on helper node, if it still keeps the
- stale routes.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Test Case : test_BGP_GR_chaos_34 "
- "BGP GR "
- "[Restart Mode]R1---R3[Helper Mode]"
- )
-
- logger.info("[Step 1] : Configure restarting" " router R1 to prevent ")
- logger.info("[Step 2] : Reset the session" " between R1 and R3..")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {"preserve-fw-state": True, "disable-eor": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verify f-bit before killing BGPd daemon
- result = verify_f_bit(tgen, topo, addr_type, input_dict, "r3", "r1")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes after starting BGPd daemon
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 3] : Kill BGPd daemon on R1..")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 4] : Withdraw/delete the prefixes " "originated from R1..")
-
- # Api call to delete advertised networks
- network = {"ipv4": "101.0.20.1/32", "ipv6": "1::1/128"}
- for addr_type in ADDR_TYPES:
- input_dict_2 = {
- "r1": {
- "bgp": {
- "address_family": {
- addr_type: {
- "unicast": {
- "advertise_networks": [
- {
- "network": network[addr_type],
- "no_of_network": 5,
- "delete": True,
- }
- ]
- }
- }
- }
- }
- }
- }
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 5] : Remove the CLI from R1's config to " "set the F-bit..")
-
- # Modify graceful-restart config not to set f-bit
- # and write to /etc/frr
- input_dict_2 = {"r1": {"bgp": {"graceful-restart": {"preserve-fw-state": False}}}}
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(tc_name, result)
-
- logger.info("[Step 6] : Bring up the BGPd daemon on R1 again..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verify f-bit after starting BGPd daemon
- result = verify_f_bit(
- tgen, topo, addr_type, input_dict, "r3", "r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r3: F-bit is set to True\n Error: {}".format(
- tc_name, result
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying BGP RIB routes after starting BGPd daemon
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_34_1_p1(request):
- """
- Test Objective : Restarting node doesn't preserve forwarding
- state, helper router should not keep the stale entries.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Test Case : test_BGP_GR_chaos_31 "
- "BGP GR "
- "[Restart Mode]R1---R3[Helper Mode]"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {
- "preserve-fw-state": True,
- "timer": {"restart-time": GR_RESTART_TIMER},
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes after starting BGPd daemon
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info(
- "[Step 1] : Remove the preserve-fw-state command"
- " from restarting node R1's config"
- )
-
- # Configure graceful-restart to set f-bit as False
- input_dict_2 = {"r1": {"bgp": {"graceful-restart": {"preserve-fw-state": False}}}}
-
- result = create_router_bgp(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- logger.info("[Step 2] : Reset the session between R1 and R3..")
-
- # Reset sessions
- for addr_type in ADDR_TYPES:
- clear_bgp(tgen, addr_type, "r1")
-
- result = verify_bgp_convergence_from_running_config(tgen, topo)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- for addr_type in ADDR_TYPES:
- # Verify f-bit after starting BGPd daemon
- result = verify_f_bit(
- tgen, topo, addr_type, input_dict_2, "r3", "r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r3: F-bit is set to True\n Error: {}".format(
- tc_name, result
- )
- logger.info(" Expected behavior: {}".format(result))
-
- logger.info("[Step 3] : Kill BGPd daemon on R1..")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- # Waiting for GR_RESTART_TIMER
- logger.info("Waiting for {} sec..".format(GR_RESTART_TIMER))
- sleep(GR_RESTART_TIMER)
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- input_dict = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_32_p1(request):
- """
- Test Objective : Restarting node is connected to multiple helper
- nodes, one of them doesn't send EOR to restarting router. Verify
- that only after SDT restarting node send EOR to all helper peers
- excluding the prefixes originated by faulty router.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Test Case : test_BGP_GR_chaos_32 "
- "BGP GR "
- "[Restart Mode]R1---R3&R5[Helper Mode]"
- )
-
- logger.info(
- "[Step 1] : Change the mode on R1 be a restarting" " node on global level"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {"graceful-restart": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"next_hop_self": True}}},
- "r5": {"dest_link": {"r1": {"graceful-restart": True}}},
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"next_hop_self": True}}},
- "r5": {"dest_link": {"r1": {"graceful-restart": True}}},
- }
- }
- },
- },
- }
- },
- "r5": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r5": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r5": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r5")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r5"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes after starting BGPd daemon
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r5"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 2] : Kill BGPd daemon on R1..")
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 3] : Withdraw all the advertised prefixes from R5")
-
- # Api call to delete advertised networks
- network = {"ipv4": "105.0.20.1/32", "ipv6": "5::1/128"}
- for addr_type in ADDR_TYPES:
- input_dict_2 = {
- "r5": {
- "bgp": {
- "address_family": {
- addr_type: {
- "unicast": {
- "advertise_networks": [
- {
- "network": network[addr_type],
- "no_of_network": 5,
- "delete": True,
- }
- ]
- }
- }
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(
- tc_name, result
- )
-
- logger.info(
- "[Step 4] : Stop the helper router R5 from sending EOR" " message using CLI"
- )
-
- # Modify graceful-restart config to prevent sending EOR
- input_dict_3 = {"r5": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
-
- result = create_router_bgp(tgen, topo, input_dict_3)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- logger.info("[Step 5] : Bring up the BGPd daemon on R1..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verify EOR is disabled
- result = verify_eor(
- tgen, topo, addr_type, input_dict_3, dut="r5", peer="r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r5: EOR is set to TRUE\n Error: {}".format(
- tc_name, result
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying BGP RIB routes after starting BGPd daemon
- input_dict_1 = {key: topo["routers"][key] for key in ["r5"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_37_p1(request):
- """
- Test Objective : Verify if helper node restarts before sending the
- EOR message, restarting node doesn't wait until stale path timer
- expiry to do the best path selection and sends an EOR
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Test Case : test_BGP_GR_chaos_37 "
- "BGP GR "
- "[Restart Mode]R1---R3[Helper Mode]"
- )
-
- logger.info(
- "[Step 1] : Configure restarting router R3 to prevent " "sending an EOR.."
- )
-
- logger.info("[Step 2] : Reset the session between R3 and R1..")
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "graceful-restart": {"disable-eor": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verify EOR is disabled
- result = verify_eor(
- tgen, topo, addr_type, input_dict, dut="r3", peer="r1", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r3: EOR is set to True\n Error: {}".format(
- tc_name, result
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying BGP RIB routes after starting BGPd daemon
- dut = "r1"
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 3] : Kill BGPd daemon on R1..")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 4] : Start BGPd daemon on R1..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 5] : Kill BGPd daemon on R3..")
-
- # Kill BGPd daemon on R3
- kill_router_daemons(tgen, "r3", ["bgpd"])
-
- # Modify graceful-restart config to prevent sending EOR
- input_dict_2 = {"r3": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error {}".format(tc_name, result)
-
- logger.info("[Step 6] : Start BGPd daemon on R3..")
-
- # Start BGPd daemon on R3
- start_router_daemons(tgen, "r3", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verify r_bit
- result = verify_r_bit(tgen, topo, addr_type, input_dict, dut="r1", peer="r3")
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verify EOR is send from R1 to R3
- input_dict_3 = {"r1": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
-
- result = verify_eor(
- tgen, topo, addr_type, input_dict_3, dut="r1", peer="r3", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r1: EOR is set to True\n Error: {}".format(
- tc_name, result
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_chaos_30_p1(request):
- """
- Test Objective : Restarting node removes stale routes from Zebra
- after receiving an EOR from helper router.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Test Case : test_BGP_GR_chaos_30 "
- "BGP GR [Helper Mode]R3-----R1[Restart Mode] "
- )
-
- # Configure graceful-restart and timers
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {"preserve-fw-state": True},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes before shutting down BGPd daemon
- dut = "r1"
- input_dict = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict)
- assert result is True, "Testcase {} : Failed \n Error {}".format(
- tc_name, result
- )
-
- logger.info("[Step 2] : Kill BGPd daemon on R1..")
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- logger.info("[Step 3] : Withdraw advertised prefixes from R3...")
-
- # Api call to delete advertised networks
- network = {"ipv4": "103.0.20.1/32", "ipv6": "3::1/128"}
- for addr_type in ADDR_TYPES:
- input_dict = {
- "r3": {
- "bgp": {
- "address_family": {
- addr_type: {
- "unicast": {
- "advertise_networks": [
- {
- "network": network[addr_type],
- "no_of_network": 5,
- "delete": True,
- }
- ]
- }
- }
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(
- tc_name, result
- )
-
- logger.info("[Step 4] : Start BGPd daemon on R1..")
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes before shutting down BGPd daemon
- input_dict = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_15_p2(request):
- """
- Test Objective : Test GR scenarios by enabling Graceful Restart
- for multiple address families..
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r6": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r6": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r6": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r6": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r6")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r6"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info(
- "[Step 2] : Test Setup "
- "[Helper Mode]R6-----R1[Restart Mode]"
- "--------R2[Helper Mode] Initilized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r2": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- result = verify_bgp_convergence(tgen, topo)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def BGP_GR_TC_7_p1(request):
- """
- Verify that BGP restarting node deletes all the routes received from peer
- if BGP Graceful capability is not present in BGP Open message from the
- peer
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- " Verify route download to RIB: BGP_GR_TC_7 >> "
- "BGP GR [Helper Mode]R3-----R1[Restart Mode] "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r1": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "preserve-fw-state": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {"dest_link": {"r1": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes received from router R1
- dut = "r1"
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info("R1 goes for reload")
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- # Change the configuration on router R1
- input_dict_2 = {
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
-
- # Change the configuration on R1
- network = {"ipv4": "103.0.20.1/32", "ipv6": "3::1/128"}
- for addr_type in ADDR_TYPES:
- input_dict_2 = {
- "r3": {
- "bgp": {
- "address_family": {
- addr_type: {
- "unicast": {
- "advertise_networks": [
- {
- "network": network[addr_type],
- "no_of_network": 5,
- "delete": True,
- }
- ]
- }
- }
- }
- }
- }
- }
-
- result = create_router_bgp(tgen, topo, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info("R1 is about to come up now")
- start_router_daemons(tgen, "r1", ["bgpd"])
- logger.info("R1 is UP Now")
-
- # Wait for RIB stale timeout
- logger.info("Verify routes are not present" "in restart router")
-
- for addr_type in ADDR_TYPES:
- # Verifying RIB routes
- dut = "r1"
- input_dict_1 = {key: topo["routers"][key] for key in ["r3"]}
- result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r1: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_TC_23_p1(request):
- """
- Verify that helper routers are deleting stale routes after stale route
- timer's expiry. If all the routes are not received from restating node
- after restart.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "Verify Stale Routes are deleted on helper: BGP_GR_TC_23 >> "
- "BGP GR [Helper Mode]R1-----R2[Restart Mode] "
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "graceful-restart": {"timer": {"stalepath-time": GR_STALEPATH_TIMER}},
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- },
- }
- },
- "r2": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- "preserve-fw-state": True,
- },
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {"dest_link": {"r2": {"graceful-restart": True}}}
- }
- }
- },
- },
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes received from router R1
- dut = "r1"
- input_dict_1 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info("R2 goes for reload")
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- # Modify configuration to delete routes and include disable-eor
- input_dict_3 = {"r2": {"bgp": {"graceful-restart": {"disable-eor": True}}}}
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
-
- # Modify configuration to delete routes and include disable-eor
- network = {"ipv4": "102.0.20.1/32", "ipv6": "2::1/128"}
- for addr_type in ADDR_TYPES:
- input_dict_3 = {
- "r2": {
- "bgp": {
- "address_family": {
- addr_type: {
- "unicast": {
- "advertise_networks": [
- {
- "network": network[addr_type],
- "no_of_network": 3,
- "delete": True,
- }
- ]
- }
- }
- }
- }
- }
- }
-
- result = modify_bgp_config_when_bgpd_down(tgen, topo, input_dict_3)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info("BGPd comes up for r2")
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- # Wait for stalepath timer
- logger.info("Waiting for stalepath timer({} sec..)".format(GR_STALEPATH_TIMER))
- sleep(GR_STALEPATH_TIMER)
-
- for addr_type in ADDR_TYPES:
- clear_bgp(tgen, addr_type, "r2")
-
- # Verifying RIB routes
- dut = "r1"
- network = {"ipv4": "102.0.20.4/32", "ipv6": "2::4/128"}
- for addr_type in ADDR_TYPES:
- input_dict_1 = {
- "r1": {
- "bgp": {
- "address_family": {
- addr_type: {
- "unicast": {
- "advertise_networks": [
- {"network": network[addr_type], "no_of_network": 2}
- ]
- }
- }
- }
- }
- }
- }
-
- # Verify EOR on helper router
- result = verify_eor(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2", expected=False
- )
- assert (
- result is not True
- ), "Testcase {} : Failed \n " "r1: EOR is set to True\n Error: {}".format(
- tc_name, result
- )
-
- # Verifying BGP RIB routes received from router R1
- dut = "r1"
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_20_p1(request):
- """
- Test Objective : Verify that GR routers delete all the routes
- received from a node if both the routers are configured as GR
- helper node
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Step 1] : Test Setup " "[Restart Mode]R3-----R1[Restart Mode] Initilized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in BGP RIB\n Error: {}".format(
- tc_name, result
- )
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1, expected=False)
- assert result is not True, (
- "Testcase {} : Failed \n "
- "r3: routes are still present in ZEBRA\n Error: {}".format(tc_name, result)
- )
- logger.info(" Expected behavior: {}".format(result))
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r1", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- result = verify_bgp_convergence(tgen, topo)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_21_p2(request):
- """
- Test Objective : VVerify BGP-GR feature when helper node is
- a transit router for it's eBGP peers.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Step 1] : Test Setup " "[Helper Mode]R6-----R1[Restart Mode] Initilized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r6": {
- "dest_link": {
- "r1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r6": {
- "dest_link": {
- "r1": {"graceful-restart-disable": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r6": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r6": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r6": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r6")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r6"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info(
- "[Step 2] : Test Setup "
- "[Restart Mode]R2-----[Helper Mode]R1[Disable Mode]"
- "--------R6[Helper Mode] Initilized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {
- "bgp": {
- "graceful-restart": {
- "graceful-restart": True,
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- result = verify_bgp_convergence(tgen, topo)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes after bringing up BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r6"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-def test_BGP_GR_22_p2(request):
- """
- Test Objective : Verify BGP-GR feature when helper node
- is a transit router for it's iBGP peers.
- """
-
- tgen = get_topogen()
- tc_name = request.node.name
- write_test_header(tc_name)
-
- # Check router status
- check_router_status(tgen)
-
- # Don't run this test if we have any failure.
- if tgen.routers_have_failure():
- pytest.skip(tgen.errors)
-
- # Creating configuration from JSON
- reset_config_on_routers(tgen)
-
- logger.info(
- "[Step 1] : Test Setup " "[Helper Mode]R3-----R1[Restart Mode] Initilized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "graceful-restart-disable": True,
- "next_hop_self": True,
- }
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r3": {
- "dest_link": {
- "r1": {
- "graceful-restart-disable": True,
- "next_hop_self": True,
- }
- }
- }
- }
- }
- },
- }
- }
- },
- "r3": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r1": {
- "dest_link": {
- "r3": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r3")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r3"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- logger.info(
- "[Step 2] : Test Setup "
- "[Restart Mode]R2-----[Helper Mode]R1[Disable Mode]"
- "--------R3[Helper Mode] Initilized"
- )
-
- # Configure graceful-restart
- input_dict = {
- "r1": {
- "bgp": {
- "address_family": {
- "ipv4": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- "ipv6": {
- "unicast": {
- "neighbor": {
- "r2": {
- "dest_link": {
- "r1": {"graceful-restart-helper": True}
- }
- }
- }
- }
- },
- }
- }
- },
- "r2": {"bgp": {"graceful-restart": {"graceful-restart": True}}},
- }
-
- configure_gr_followed_by_clear(tgen, topo, input_dict, tc_name, dut="r1", peer="r2")
-
- for addr_type in ADDR_TYPES:
- result = verify_graceful_restart(
- tgen, topo, addr_type, input_dict, dut="r1", peer="r2"
- )
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Kill BGPd daemon on R1
- kill_router_daemons(tgen, "r2", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Start BGPd daemon on R1
- start_router_daemons(tgen, "r2", ["bgpd"])
-
- for addr_type in ADDR_TYPES:
- result = verify_bgp_convergence(tgen, topo)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_1 = {key: topo["routers"][key] for key in ["r1"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_1)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying BGP RIB routes
- dut = "r3"
- input_dict_2 = {key: topo["routers"][key] for key in ["r2"]}
- result = verify_bgp_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- # Verifying RIB routes before shutting down BGPd daemon
- result = verify_rib(tgen, addr_type, dut, input_dict_2)
- assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
-
- write_test_footer(tc_name)
-
-
-if __name__ == "__main__":
- args = ["-s"] + sys.argv[1:]
- sys.exit(pytest.main(args))
projects / matthieu / frr.git / commitdiff