--- /dev/null
+frr defaults traditional
+!
+hostname ce1
+password zebra
+log stdout notifications
+log monitor notifications
+log commands
+router bgp 5226
+ bgp router-id 99.0.0.1
+ neighbor 192.168.1.1 remote-as 5226
+ neighbor 192.168.1.1 update-source 192.168.1.2
+ address-family ipv4 unicast
+ network 5.1.0.0/24 route-map rm-nh
+ network 5.1.1.0/24 route-map rm-nh
+ neighbor 192.168.1.1 activate
+ exit-address-family
+!
+access-list al-any permit any
+!
+route-map rm-nh permit 10
+ match ip address al-any
+ set ip next-hop 99.0.0.1
+ set local-preference 123
+ set metric 98
+ set large-community 12:34:56
+ set extcommunity rt 89:123
+ set community 0:67
+!
+
+end
+
+
+
--- /dev/null
+log file /tmp/ce1-zebra.log
+!
+hostname ce1
+!
+interface lo
+ ip address 99.0.0.1/32
+!
+interface ce1-eth0
+ description to r1
+ ip address 192.168.1.2/24
+ no link-detect
+!
+ip forwarding
+!
+!
+line vty
+!
--- /dev/null
+frr defaults traditional
+!
+hostname ce2
+password zebra
+log stdout notifications
+log monitor notifications
+log commands
+router bgp 5226
+ bgp router-id 99.0.0.2
+ neighbor 192.168.1.1 remote-as 5226
+ neighbor 192.168.1.1 update-source 192.168.1.2
+ address-family ipv4 unicast
+ network 5.1.0.0/24 route-map rm-nh
+ network 5.1.1.0/24 route-map rm-nh
+ neighbor 192.168.1.1 activate
+ exit-address-family
+!
+access-list al-any permit any
+!
+route-map rm-nh permit 10
+ match ip address al-any
+ set ip next-hop 99.0.0.2
+ set local-preference 100
+ set metric 100
+ set large-community 12:34:56
+ set extcommunity rt 89:123
+ set community 0:67
+!
+
+end
+
+
+
--- /dev/null
+log file /tmp/ce2-zebra.log
+!
+hostname ce2
+!
+interface lo
+ ip address 99.0.0.2/32
+!
+interface ce2-eth0
+ description to r3
+ ip address 192.168.1.2/24
+ no link-detect
+!
+ip forwarding
+!
+!
+line vty
+!
--- /dev/null
+frr defaults traditional
+!
+hostname ce3
+password zebra
+log stdout notifications
+log monitor notifications
+log commands
+router bgp 5226
+ bgp router-id 99.0.0.3
+ neighbor 192.168.1.1 remote-as 5226
+ neighbor 192.168.1.1 update-source 192.168.1.2
+ address-family ipv4 unicast
+ network 5.1.2.0/24 route-map rm-nh
+ network 5.1.3.0/24 route-map rm-nh
+ neighbor 192.168.1.1 activate
+ exit-address-family
+!
+access-list al-any permit any
+!
+route-map rm-nh permit 10
+ match ip address al-any
+ set ip next-hop 99.0.0.3
+ set local-preference 50
+ set metric 200
+ set large-community 12:34:56
+ set extcommunity rt 89:123
+ set community 0:67
+!
+
+end
+
+
+
--- /dev/null
+log file /tmp/ce3-zebra.log
+!
+hostname ce3
+!
+interface lo
+ ip address 99.0.0.3/32
+!
+interface ce3-eth0
+ description to r4
+ ip address 192.168.1.2/24
+ no link-detect
+!
+ip forwarding
+!
+!
+line vty
+!
--- /dev/null
+frr defaults traditional
+!
+hostname r1
+password zebra
+log stdout notifications
+log monitor notifications
+log commands
+router bgp 5226
+ bgp router-id 1.1.1.1
+ bgp cluster-id 1.1.1.1
+ neighbor 192.168.1.2 remote-as 5226
+ neighbor 192.168.1.2 update-source 192.168.1.1
+ neighbor 192.168.1.2 route-reflector-client
+ neighbor 2.2.2.2 remote-as 5226
+ neighbor 2.2.2.2 update-source 1.1.1.1
+!
+ address-family ipv4 unicast
+ redistribute vnc-direct
+ neighbor 192.168.1.2 activate
+ neighbor 192.168.1.2 next-hop-self
+ no neighbor 2.2.2.2 activate
+ exit-address-family
+!
+ address-family ipv4 vpn
+ neighbor 2.2.2.2 activate
+ exit-address-family
+!
+ vrf-policy cust1
+ label 101
+ rd 10:1
+ rt both 52:100
+ nexthop 192.168.1.1
+ exit-vrf-policy
+!
+ vnc export bgp mode group-nve
+ vnc export bgp group-nve group cust1
+ vnc redistribute mode resolve-nve
+ vnc redistribute ipv4 bgp-direct
+ !
+end
--- /dev/null
+hostname r1
+log file /tmp/r1-ldpd.log
+!
+debug mpls ldp zebra
+debug mpls ldp event
+debug mpls ldp errors
+debug mpls ldp messages recv
+debug mpls ldp messages sent
+debug mpls ldp discovery hello recv
+debug mpls ldp discovery hello sent
+!
+mpls ldp
+ router-id 1.1.1.1
+ !
+ address-family ipv4
+ discovery transport-address 1.1.1.1
+ !
+ interface r1-eth0
+ !
+ !
+!
+line vty
+!
--- /dev/null
+hostname r1
+log file /tmp/r1-ospfd.log
+!
+router ospf
+ router-id 1.1.1.1
+ network 0.0.0.0/4 area 0
+ redistribute static
+!
--- /dev/null
+log file /tmp/r1-zebra.log
+!
+hostname r1
+!
+interface lo
+ ip address 1.1.1.1/32
+!
+interface r1-eth0
+ description to sw0
+ ip address 10.0.1.1/24
+ no link-detect
+!
+interface r1-eth4
+ description to ce1
+ ip address 192.168.1.1/24
+ no link-detect
+!
+ip route 99.0.0.1/32 192.168.1.2
+!
+ip forwarding
+!
+!
+line vty
+!
--- /dev/null
+frr defaults traditional
+!
+hostname r2
+password zebra
+log stdout notifications
+log monitor notifications
+log commands
+router bgp 5226
+ bgp router-id 2.2.2.2
+ bgp cluster-id 2.2.2.2
+ neighbor 1.1.1.1 remote-as 5226
+ neighbor 1.1.1.1 update-source 2.2.2.2
+ neighbor 3.3.3.3 remote-as 5226
+ neighbor 3.3.3.3 update-source 2.2.2.2
+ neighbor 4.4.4.4 remote-as 5226
+ neighbor 4.4.4.4 update-source 2.2.2.2
+ address-family ipv4 unicast
+ no neighbor 1.1.1.1 activate
+ no neighbor 3.3.3.3 activate
+ no neighbor 4.4.4.4 activate
+ exit-address-family
+ address-family ipv4 vpn
+ neighbor 1.1.1.1 activate
+ neighbor 1.1.1.1 route-reflector-client
+ neighbor 3.3.3.3 activate
+ neighbor 3.3.3.3 route-reflector-client
+ neighbor 4.4.4.4 activate
+ neighbor 4.4.4.4 route-reflector-client
+ exit-address-family
+end
+
+
+
--- /dev/null
+hostname r2
+log file /tmp/r2-ldpd.log
+!
+debug mpls ldp zebra
+debug mpls ldp event
+debug mpls ldp errors
+debug mpls ldp messages recv
+debug mpls ldp messages sent
+debug mpls ldp discovery hello recv
+debug mpls ldp discovery hello sent
+!
+mpls ldp
+ router-id 2.2.2.2
+ !
+ address-family ipv4
+ discovery transport-address 2.2.2.2
+ !
+ interface r2-eth0
+ !
+ interface r2-eth1
+ !
+ !
+!
+line vty
+!
--- /dev/null
+hostname r2
+log file /tmp/r2-ospfd.log
+!
+router ospf
+ router-id 2.2.2.2
+ network 0.0.0.0/0 area 0
+!
--- /dev/null
+log file /tmp/r2-zebra.log
+!
+hostname r2
+!
+interface lo
+ ip address 2.2.2.2/32
+!
+interface r2-eth0
+ description to sw0
+ ip address 10.0.1.2/24
+ no link-detect
+!
+interface r2-eth1
+ description to sw1
+ ip address 10.0.2.2/24
+ no link-detect
+!
+interface r2-eth2
+ description to sw2
+ ip address 10.0.3.2/24
+ no link-detect
+!
+ip forwarding
+!
+!
+line vty
+!
--- /dev/null
+frr defaults traditional
+!
+hostname r3
+password zebra
+log stdout notifications
+log monitor notifications
+log commands
+router bgp 5226
+ bgp router-id 3.3.3.3
+ bgp cluster-id 3.3.3.3
+ neighbor 192.168.1.2 remote-as 5226
+ neighbor 192.168.1.2 update-source 192.168.1.2
+ neighbor 192.168.1.2 route-reflector-client
+ neighbor 2.2.2.2 remote-as 5226
+ neighbor 2.2.2.2 update-source 3.3.3.3
+!
+ address-family ipv4 unicast
+ redistribute vnc-direct
+ neighbor 192.168.1.2 activate
+ neighbor 192.168.1.2 next-hop-self
+ no neighbor 2.2.2.2 activate
+ exit-address-family
+ address-family ipv4 vpn
+ neighbor 2.2.2.2 activate
+ exit-address-family
+!
+ vrf-policy cust1
+ label 103
+ rd 10:3
+ rt both 52:100
+ nexthop 192.168.1.1
+ exit-vrf-policy
+!
+ vnc export bgp mode group-nve
+ vnc export bgp group-nve group cust1
+ vnc redistribute mode resolve-nve
+ vnc redistribute ipv4 bgp-direct
+!
+end
+
+
+
--- /dev/null
+hostname r3
+log file /tmp/r3-ldpd.log
+!
+debug mpls ldp zebra
+debug mpls ldp event
+debug mpls ldp errors
+debug mpls ldp messages recv
+debug mpls ldp messages sent
+debug mpls ldp discovery hello recv
+debug mpls ldp discovery hello sent
+!
+mpls ldp
+ router-id 3.3.3.3
+ !
+ address-family ipv4
+ discovery transport-address 3.3.3.3
+ !
+ interface r3-eth0
+ !
+ !
+!
+line vty
+!
--- /dev/null
+hostname r3
+password 1
+log file /tmp/r3-ospfd.log
+!
+router ospf
+ router-id 3.3.3.3
+ network 0.0.0.0/4 area 0
+ redistribute static
+!
--- /dev/null
+log file /tmp/r3-zebra.log
+!
+hostname r3
+!
+interface lo
+ ip address 3.3.3.3/32
+!
+interface r3-eth0
+ description to sw1
+ ip address 10.0.2.3/24
+ no link-detect
+!
+interface r3-eth1
+ description to sw2
+ ip address 10.0.3.3/24
+ no link-detect
+!
+interface r3-eth4
+ description to ce2
+ ip address 192.168.1.1/24
+ no link-detect
+!
+ip route 99.0.0.2/32 192.168.1.2
+!
+ip forwarding
+!
+!
+line vty
+!
--- /dev/null
+frr defaults traditional
+!
+hostname r4
+password zebra
+log stdout notifications
+log monitor notifications
+log commands
+router bgp 5226
+ bgp router-id 4.4.4.4
+ bgp cluster-id 4.4.4.4
+ neighbor 192.168.1.2 remote-as 5226
+ neighbor 192.168.1.2 update-source 192.168.1.1
+ neighbor 192.168.1.2 route-reflector-client
+ neighbor 2.2.2.2 remote-as 5226
+ neighbor 2.2.2.2 update-source 4.4.4.4
+!
+ address-family ipv4 unicast
+ redistribute vnc-direct
+ neighbor 192.168.1.2 activate
+ neighbor 192.168.1.2 next-hop-self
+ no neighbor 2.2.2.2 activate
+ exit-address-family
+ address-family ipv4 vpn
+ neighbor 2.2.2.2 activate
+ exit-address-family
+!
+ vrf-policy cust1
+ label 104
+ rd 10:4
+ rt both 52:100
+ nexthop 192.168.1.1
+ exit-vrf-policy
+!
+ vnc export bgp mode group-nve
+ vnc export bgp group-nve group cust1
+ vnc redistribute mode resolve-nve
+ vnc redistribute ipv4 bgp-direct
+!
+end
+
+
+
--- /dev/null
+hostname r4
+log file /tmp/r4-ldpd.log
+!
+debug mpls ldp zebra
+debug mpls ldp event
+debug mpls ldp errors
+debug mpls ldp messages recv
+debug mpls ldp messages sent
+debug mpls ldp discovery hello recv
+debug mpls ldp discovery hello sent
+!
+mpls ldp
+ router-id 4.4.4.4
+ !
+ address-family ipv4
+ discovery transport-address 4.4.4.4
+ !
+ interface r4-eth0
+ !
+ !
+!
+line vty
+!
--- /dev/null
+hostname r4
+log file /tmp/r4-ospfd.log
+!
+router ospf
+ router-id 4.4.4.4
+ network 0.0.0.0/4 area 0
+ redistribute static
+!
--- /dev/null
+log file /tmp/r4-zebra.log
+!
+hostname r4
+!
+interface lo
+ ip address 4.4.4.4/32
+!
+interface r4-eth0
+ description to sw1
+ ip address 10.0.2.4/24
+ no link-detect
+!
+interface r4-eth4
+ description to ce3
+ ip address 192.168.1.1/24
+ no link-detect
+!
+ip route 99.0.0.3/32 192.168.1.2
+!
+ip forwarding
+!
+line vty
+!
--- /dev/null
+from lutil import luCommand
+luCommand('r1','vtysh -c "add vrf cust1 prefix 99.0.0.1/32"','.','none','IP Address')
+luCommand('r3','vtysh -c "add vrf cust1 prefix 99.0.0.2/32"','.','none','IP Address')
+luCommand('r4','vtysh -c "add vrf cust1 prefix 99.0.0.3/32"','.','none','IP Address')
+luCommand('r1','vtysh -c "show vnc registrations local"','99.0.0.1','pass','Local Registration')
+luCommand('r3','vtysh -c "show vnc registrations local"','99.0.0.2','pass','Local Registration')
+luCommand('r4','vtysh -c "show vnc registrations local"','99.0.0.3','pass','Local Registration')
+luCommand('r1','vtysh -c "show vnc registrations remote"','4 out of 4','wait','Remote Registration')
+luCommand('r3','vtysh -c "show vnc registrations remote"','6 out of 6','wait','Remote Registration')
+luCommand('r4','vtysh -c "show vnc registrations remote"','4 out of 4','wait','Remote Registration')
+luCommand('r1','vtysh -c "show vnc registrations"','.','none')
+luCommand('r3','vtysh -c "show vnc registrations"','.','none')
+luCommand('r4','vtysh -c "show vnc registrations"','.','none')
--- /dev/null
+from lutil import luCommand
+luCommand('r1','vtysh -c "show bgp summary"',' 00:0.* 00:0','wait','Adjacencies up')
+luCommand('r2','vtysh -c "show bgp summary"',' 00:0.* 00:0','wait','Adjacencies up')
+luCommand('r3','vtysh -c "show bgp summary"',' 00:0.* 00:0','wait','Adjacencies up')
+luCommand('r4','vtysh -c "show bgp summary"',' 00:0.* 00:0','wait','Adjacencies up')
--- /dev/null
+from lutil import luCommand
+luCommand('ce1','vtysh -c "show bgp ipv4 uni"','7 routes and 7','wait','Local and remote routes')
+luCommand('ce2','vtysh -c "show bgp ipv4 uni"','7 routes and 9','wait','Local and remote routes')
+luCommand('ce3','vtysh -c "show bgp ipv4 uni"','7 routes and 7','wait','Local and remote routes')
+luCommand('r1','vtysh -c "show bgp ipv4 uni"','7 routes and 9','pass','Unicast SAFI')
+luCommand('r2','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Unicast SAFI')
+luCommand('r3','vtysh -c "show bgp ipv4 uni"','7 routes and 9','pass','Unicast SAFI')
+luCommand('r4','vtysh -c "show bgp ipv4 uni"','7 routes and 9','pass','Unicast SAFI')
+luCommand('r1','vtysh -c "show bgp ipv4 vpn"','7 routes and 7','pass','VPN SAFI')
+luCommand('r2','vtysh -c "show bgp ipv4 vpn"','7 routes and 7','pass','VPN SAFI')
+luCommand('r3','vtysh -c "show bgp ipv4 vpn"','7 routes and 7','pass','VPN SAFI')
+luCommand('r4','vtysh -c "show bgp ipv4 vpn"','7 routes and 7','pass','VPN SAFI')
+
--- /dev/null
+from lutil import luCommand
+luCommand('r1','vtysh -c "clear vrf cust1 prefix 99.0.0.1/32"','.','none','Cleared VRF route')
+luCommand('r3','vtysh -c "clear vrf cust1 prefix 99.0.0.2/32"','.','none','Cleared VRF route')
+luCommand('r4','vtysh -c "clear vrf cust1 prefix 99.0.0.3/32"','.','none','Cleared VRF route')
+luCommand('r1','vtysh -c "show vnc registrations local"','99.0.0.1','fail','Local Registration cleared')
+luCommand('r3','vtysh -c "show vnc registrations local"','99.0.0.2','fail','Local Registration cleared')
+luCommand('r4','vtysh -c "show vnc registrations local"','99.0.0.3','fail','Local Registration cleared')
+luCommand('r1','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Unicast SAFI updated')
+luCommand('r2','vtysh -c "show bgp ipv4 uni"','No BGP prefixes displayed','pass','Unicast SAFI')
+luCommand('r3','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Unicast SAFI updated')
+luCommand('r4','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Unicast SAFI updated')
+luCommand('ce1','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Local and remote routes')
+luCommand('ce2','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Local and remote routes')
+luCommand('ce3','vtysh -c "show bgp ipv4 uni"','2 routes and 2','wait','Local and remote routes')
+luCommand('r1','vtysh -c "show vnc registrations remote"','Prefix ','fail','Remote Registration cleared')
+luCommand('r3','vtysh -c "show vnc registrations remote"','Prefix ','fail','Remote Registration cleared')
+luCommand('r4','vtysh -c "show vnc registrations remote"','Prefix ','fail','Remote Registration cleared')
--- /dev/null
+#!/usr/bin/env python
+
+#
+# test_bgp_multiview_topo1.py
+# Part of NetDEF Topology Tests
+#
+# Copyright (c) 2016 by
+# Network Device Education Foundation, Inc. ("NetDEF")
+#
+# Permission to use, copy, modify, and/or distribute this software
+# for any purpose with or without fee is hereby granted, provided
+# that the above copyright notice and this permission notice appear
+# in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND NETDEF DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL NETDEF BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+# DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+# OF THIS SOFTWARE.
+#
+
+"""
+test_mpls_vpn_topo1.py: Simple FRR/Quagga MPLS VPN Test
+
+ |
+ +----+----+
+ | ce1 |
+ | 99.0.0.1| CE Router
+ +----+----+
+ 192.168.1. | .2 ce1-eth0
+ | .1 r1-eth4
+ +---------+
+ | r1 |
+ | 1.1.1.1 | PE Router
+ +----+----+
+ | .1 r1-eth0
+ |
+ ~~~~~~~~~~~~~
+ ~~ sw0 ~~
+ ~~ 10.0.1.0/24 ~~
+ ~~~~~~~~~~~~~
+ |10.0.1.0/24
+ |
+ | .2 r2-eth0
+ +----+----+
+ | r2 |
+ | 2.2.2.2 | P router
+ +--+---+--+
+ r2-eth2 .2 | | .2 r2-eth1
+ ______/ \______
+ / \
+ ~~~~~~~~~~~~~ ~~~~~~~~~~~~~
+~~ sw2 ~~ ~~ sw1 ~~
+~~ 10.0.3.0/24 ~~ ~~ 10.0.2.0/24 ~~
+ ~~~~~~~~~~~~~ ~~~~~~~~~~~~~
+ | / |
+ \ _________/ |
+ \ / \
+r3-eth1 .3 | | .3 r3-eth0 | .4 r4-eth0
+ +----+--+---+ +----+----+
+ | r3 | | r4 |
+ | 3.3.3.3 | | 4.4.4.4 | PE Routers
+ +-----------+ +---------+
+ 192.168.1. | .1 192.168.1. | .1 rX-eth4
+ | .2 | .2 ceX-eth0
+ +-----+-----+ +----+-----+
+ | ce2 | | ce3 |
+ | 99.0.0.2 | | 99.0.0.3 | CE Routers
+ +-----+-----+ +----+-----+
+ | |
+
+"""
+
+import os
+import re
+import sys
+import pytest
+from time import sleep
+
+from mininet.topo import Topo
+from mininet.net import Mininet
+from mininet.node import Node, OVSSwitch, Host
+from mininet.log import setLogLevel, info
+from mininet.cli import CLI
+from mininet.link import Intf
+
+sys.path.append(os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
+sys.path.append(os.path.dirname(os.path.dirname(os.path.abspath(__file__))) + '/utilities')
+
+from lib import topotest
+
+from lutil import luStart, luInclude, luFinish, luNumFail
+
+fatal_error = ""
+
+# Expected version of CLI Output - Appendix to filename
+# empty string = current, latest output (default)
+# "-1" ... "-NNN" previous versions (incrementing with each version)
+cli_version = ""
+
+#####################################################
+##
+## Network Topology Definition
+##
+#####################################################
+
+class NetworkTopo(Topo):
+ "VPN Test Topology 1"
+
+ def build(self, **_opts):
+
+ # Setup Routers
+ router = {}
+ for i in range(1, 5):
+ router[i] = topotest.addRouter(self, 'r%s' % i)
+ ce = {}
+ for i in range(1, 4):
+ ce[i] = topotest.addRouter(self, 'ce%s' % i)
+
+ self.addLink(ce[1], router[1], intfName1='ce1-eth0', intfName2='r1-eth4', addr1='00:11:01:00:00:00', addr2='00:11:00:01:00:04')
+ self.addLink(ce[2], router[3], intfName1='ce2-eth0', intfName2='r3-eth4', addr1='00:11:02:00:00:00', addr2='00:11:00:03:00:04')
+ self.addLink(ce[3], router[4], intfName1='ce3-eth0', intfName2='r4-eth4', addr1='00:11:03:00:00:00', addr2='00:11:00:04:00:04')
+ # Setup Switches, add Interfaces and Connections
+ switch = {}
+ # First switch
+ switch[0] = self.addSwitch('sw0', cls=topotest.LegacySwitch)
+ self.addLink(switch[0], router[1], intfName2='r1-eth0', addr1='80:AA:00:00:00:00', addr2='00:11:00:01:00:00')
+ self.addLink(switch[0], router[2], intfName2='r2-eth0', addr1='80:AA:00:00:00:01', addr2='00:11:00:02:00:00')
+ # Second switch
+ switch[1] = self.addSwitch('sw1', cls=topotest.LegacySwitch)
+ self.addLink(switch[1], router[2], intfName2='r2-eth1', addr1='80:AA:00:01:00:00', addr2='00:11:00:02:00:01')
+ self.addLink(switch[1], router[3], intfName2='r3-eth0', addr1='80:AA:00:01:00:01', addr2='00:11:00:03:00:00')
+ self.addLink(switch[1], router[4], intfName2='r4-eth0', addr1='80:AA:00:01:00:02', addr2='00:11:00:04:00:00')
+ # Third switch
+ switch[2] = self.addSwitch('sw2', cls=topotest.LegacySwitch)
+ self.addLink(switch[2], router[2], intfName2='r2-eth2', addr1='80:AA:00:02:00:00', addr2='00:11:00:02:00:02')
+ self.addLink(switch[2], router[3], intfName2='r3-eth1', addr1='80:AA:00:02:00:01', addr2='00:11:00:03:00:01')
+
+#####################################################
+##
+## Tests starting
+##
+#####################################################
+
+def setup_module(module):
+ global topo, net
+ global fatal_error
+ global thisDir
+
+ print("\n\n** %s: Setup Topology" % module.__name__)
+ print("******************************************\n")
+
+ print("Cleanup old Mininet runs")
+ os.system('sudo mn -c > /dev/null 2>&1')
+
+ thisDir = os.path.dirname(os.path.realpath(__file__))
+ topo = NetworkTopo()
+
+ net = Mininet(controller=None, topo=topo)
+ net.start()
+ luStart(thisDir, net)
+
+ # Starting Routers
+ for i in range(1, 5):
+ net['r%s' % i].loadConf('zebra', '%s/r%s/zebra.conf' % (thisDir, i))
+ net['r%s' % i].loadConf('ospfd', '%s/r%s/ospfd.conf' % (thisDir, i))
+ net['r%s' % i].loadConf('ldpd', '%s/r%s/ldpd.conf' % (thisDir, i))
+ net['r%s' % i].loadConf('bgpd', '%s/r%s/bgpd.conf' % (thisDir, i))
+ fatal_error = net['r%s' % i].startRouter()
+
+ if fatal_error != "":
+ break
+
+ # Starting CE Routers
+ for i in range(1, 4):
+ net['ce%s' % i].loadConf('zebra', '%s/ce%s/zebra.conf' % (thisDir, i))
+ net['ce%s' % i].loadConf('bgpd', '%s/ce%s/bgpd.conf' % (thisDir, i))
+ fatal_error = net['ce%s' % i].startRouter()
+
+ if fatal_error != "":
+ break
+
+ # For debugging after starting FRR/Quagga daemons, uncomment the next line
+ #CLI(net)
+
+def teardown_module(module):
+ global net
+
+ print("\n\n** %s: Shutdown Topology" % module.__name__)
+ print("******************************************\n")
+
+ # End - Shutdown network
+ net.stop()
+
+def test_add_vnc_routes():
+ global fatal_error
+ global net
+ global cli_version
+
+ # Skip if previous fatal error condition is raised
+ if (fatal_error != ""):
+ pytest.skip(fatal_error)
+
+ print("\n\n** Running main test cases")
+ print("******************************\n")
+ luInclude('teststart.py')
+ # For debugging after starting FRR/Quagga daemons, uncomment the next line
+ #CLI(net)
+
+ luInclude('testfinish.py')
+ # For debugging after starting FRR/Quagga daemons, uncomment the next line
+ #CLI(net)
+
+ # Make sure that all daemons are running
+ numFail = luNumFail()
+ if numFail > 0:
+ fatal_error = '%d tests failed' % numFail
+ assert fatal_error == "", fatal_error
+
+def test_shutdown_check_stderr():
+ global fatal_error
+ global net
+
+ # Skip if previous fatal error condition is raised
+ if (fatal_error != ""):
+ pytest.skip(fatal_error)
+
+ if os.environ.get('TOPOTESTS_CHECK_STDERR') is None:
+ print("SKIPPED final check on StdErr output: Disabled (TOPOTESTS_CHECK_STDERR undefined)\n")
+ pytest.skip('Skipping test for Stderr output')
+
+ thisDir = os.path.dirname(os.path.realpath(__file__))
+
+ print("\n\n** Verifying unexpected STDERR output from daemons")
+ print("******************************************\n")
+
+ for i in range(1, 5):
+ net['r%s' % i].stopRouter()
+ log = net['r%s' % i].getStdErr('bgpd')
+ if log:
+ print("\nRouter r%s BGPd StdErr Log:\n%s" % (i, log))
+ log = net['r%s' % i].getStdErr('ldpd')
+ if log:
+ print("\nRouter r%s LDPd StdErr Log:\n%s" % (i, log))
+ log = net['r%s' % i].getStdErr('ospfd')
+ if log:
+ print("\nRouter r%s OSPFd StdErr Log:\n%s" % (i, log))
+ log = net['r%s' % i].getStdErr('zebra')
+ if log:
+ print("\nRouter r%s Zebra StdErr Log:\n%s" % (i, log))
+
+ for i in range(1, 4):
+ net['ce%s' % i].stopRouter()
+ log = net['ce%s' % i].getStdErr('bgpd')
+ if log:
+ print("\nRouter r%s BGPd StdErr Log:\n%s" % (i, log))
+ log = net['ce%s' % i].getStdErr('zebra')
+ if log:
+ print("\nRouter r%s Zebra StdErr Log:\n%s" % (i, log))
+
+
+def test_shutdown_check_memleak():
+ global fatal_error
+ global net
+
+ # Skip if previous fatal error condition is raised
+ if (fatal_error != ""):
+ pytest.skip(fatal_error)
+
+ if os.environ.get('TOPOTESTS_CHECK_MEMLEAK') is None:
+ print("SKIPPED final check on Memory leaks: Disabled (TOPOTESTS_CHECK_MEMLEAK undefined)\n")
+ pytest.skip('Skipping test for memory leaks')
+
+ thisDir = os.path.dirname(os.path.realpath(__file__))
+
+ for i in range(1, 5):
+ net['r%s' % i].stopRouter()
+ net['r%s' % i].report_memory_leaks(os.environ.get('TOPOTESTS_CHECK_MEMLEAK'), os.path.basename(__file__))
+
+ for i in range(1, 4):
+ net['ce%s' % i].stopRouter()
+ net['ce%s' % i].report_memory_leaks(os.environ.get('TOPOTESTS_CHECK_MEMLEAK'), os.path.basename(__file__))
+
+if __name__ == '__main__':
+
+ setLogLevel('info')
+ # To suppress tracebacks, either use the following pytest call or add "--tb=no" to cli
+ # retval = pytest.main(["-s", "--tb=no"])
+ retval = pytest.main(["-s"])
+ print(luFinish())
+ sys.exit(retval)
--- /dev/null
+from lutil import luInclude
+luInclude('scripts/cleanup_all.py')
--- /dev/null
+from lutil import luInclude
+luInclude('scripts/adjacencies.py')
+luInclude('scripts/add_routes.py')
+luInclude('scripts/check_routes.py')
projects / mirror / frr.git / commitdiff