tests: add bfd_static_vrf

Add bfd_static_vrf to test BFD tracking of static routes in VRF.

Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>

diff --git a/tests/topotests/bfd_static_vrf/__init__.py b/tests/topotests/bfd_static_vrf/__init__.py
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/tests/topotests/bfd_static_vrf/r1/frr.conf b/tests/topotests/bfd_static_vrf/r1/frr.conf
new file mode 100644 (file)
index 0000000..fed2c1a
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r1/frr.conf
@@ -0,0 +1,23 @@
+interface r1-eth0 vrf cust1
+ ip address 192.168.0.1/24
+ ipv6 address fc00:1::0:1/96
+!
+interface r1-eth1 vrf cust1
+ ip address 192.168.5.1/24
+ ipv6 address fc00:2::0:1/96
+!
+ip route 0.0.0.0/0 192.168.5.4 bfd vrf cust1
+ipv6 route 0::0/0 fc00:2::4 bfd vrf cust1
+ip route 0.0.0.0/0 192.168.0.2 10 bfd vrf cust1
+ipv6 route 0::0/0 fc00:1::2 10 bfd vrf cust1
+!
+bfd
+ peer 192.168.0.2 vrf cust1
+ !
+ peer 192.168.5.4 vrf cust1
+ !
+ peer fc00:1::2 vrf cust1
+ !
+ peer fc00:2::4 vrf cust1
+ !
+!

diff --git a/tests/topotests/bfd_static_vrf/r1/show_bfd_peers.json b/tests/topotests/bfd_static_vrf/r1/show_bfd_peers.json
new file mode 100644 (file)
index 0000000..77b9ac9
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r1/show_bfd_peers.json
@@ -0,0 +1,90 @@
+[
+  {
+    "multihop": false,
+    "peer": "192.168.5.4",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "up",
+    "diagnostic": "ok",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  },
+  {
+    "multihop": false,
+    "peer": "fc00:2::4",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "up",
+    "diagnostic": "ok",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  },
+  {
+    "multihop": false,
+    "peer": "192.168.0.2",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "up",
+    "diagnostic": "ok",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  },
+  {
+    "multihop": false,
+    "peer": "fc00:1::2",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "up",
+    "diagnostic": "ok",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  }
+]

diff --git a/tests/topotests/bfd_static_vrf/r1/show_bfd_peers_step1.json b/tests/topotests/bfd_static_vrf/r1/show_bfd_peers_step1.json
new file mode 100644 (file)
index 0000000..0db00a8
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r1/show_bfd_peers_step1.json
@@ -0,0 +1,90 @@
+[
+  {
+    "multihop": false,
+    "peer": "fc00:2::4",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "down",
+    "diagnostic": "control detection time expired",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  },
+  {
+    "multihop": false,
+    "peer": "192.168.0.2",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "up",
+    "diagnostic": "ok",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  },
+  {
+    "multihop": false,
+    "peer": "192.168.5.4",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "down",
+    "diagnostic": "control detection time expired",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  },
+  {
+    "multihop": false,
+    "peer": "fc00:1::2",
+    "vrf": "cust1",
+    "passive-mode": false,
+    "status": "up",
+    "diagnostic": "ok",
+    "remote-diagnostic": "ok",
+    "type": "configured",
+    "receive-interval": 300,
+    "transmit-interval": 300,
+    "echo-receive-interval": 50,
+    "echo-transmit-interval": 0,
+    "detect-multiplier": 3,
+    "remote-receive-interval": 300,
+    "remote-transmit-interval": 300,
+    "remote-echo-receive-interval": 50,
+    "remote-detect-multiplier": 3,
+    "rtt-min": 0,
+    "rtt-avg": 0,
+    "rtt-max": 0
+  }
+]

diff --git a/tests/topotests/bfd_static_vrf/r1/show_ip_route.json b/tests/topotests/bfd_static_vrf/r1/show_ip_route.json
new file mode 100644 (file)
index 0000000..6d537b9
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r1/show_ip_route.json
@@ -0,0 +1,55 @@
+{
+  "0.0.0.0/0": [
+    {
+      "prefix": "0.0.0.0/0",
+      "prefixLen": 0,
+      "protocol": "static",
+      "vrfName": "cust1",
+      "selected": true,
+      "destSelected": true,
+      "distance": 1,
+      "metric": 0,
+      "installed": true,
+      "table": 10,
+      "internalStatus": 16,
+      "internalFlags": 73,
+      "internalNextHopNum": 1,
+      "internalNextHopActiveNum": 1,
+      "nexthops": [
+        {
+          "flags": 3,
+          "fib": true,
+          "ip": "192.168.5.4",
+          "afi": "ipv4",
+          "interfaceName": "r1-eth1",
+          "active": true,
+          "weight": 1
+        }
+      ]
+    },
+    {
+      "prefix": "0.0.0.0/0",
+      "prefixLen": 0,
+      "protocol": "static",
+      "vrfName": "cust1",
+      "selected": null,
+      "destSelected": null,
+      "distance": 10,
+      "metric": 0,
+      "table": 10,
+      "internalStatus": 0,
+      "internalFlags": 65,
+      "internalNextHopNum": 1,
+      "internalNextHopActiveNum": 1,
+      "nexthops": [
+        {
+          "ip": "192.168.0.2",
+          "afi": "ipv4",
+          "interfaceName": "r1-eth0",
+          "active": true,
+          "weight": 1
+        }
+      ]
+    }
+  ]
+}

diff --git a/tests/topotests/bfd_static_vrf/r1/show_ip_route_step1.json b/tests/topotests/bfd_static_vrf/r1/show_ip_route_step1.json
new file mode 100644 (file)
index 0000000..858c308
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r1/show_ip_route_step1.json
@@ -0,0 +1,31 @@
+{
+  "0.0.0.0/0": [
+    {
+      "prefix": "0.0.0.0/0",
+      "prefixLen": 0,
+      "protocol": "static",
+      "vrfName": "cust1",
+      "selected": true,
+      "destSelected": true,
+      "distance": 10,
+      "metric": 0,
+      "installed": true,
+      "table": 10,
+      "internalStatus": 16,
+      "internalFlags": 73,
+      "internalNextHopNum": 1,
+      "internalNextHopActiveNum": 1,
+      "nexthops": [
+        {
+          "flags": 3,
+          "fib": true,
+          "ip": "192.168.0.2",
+          "afi": "ipv4",
+          "interfaceName": "r1-eth0",
+          "active": true,
+          "weight": 1
+        }
+      ]
+    }
+  ]
+}

diff --git a/tests/topotests/bfd_static_vrf/r1/show_ipv6_route.json b/tests/topotests/bfd_static_vrf/r1/show_ipv6_route.json
new file mode 100644 (file)
index 0000000..b002764
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r1/show_ipv6_route.json
@@ -0,0 +1,55 @@
+{
+  "::/0": [
+    {
+      "prefix": "::/0",
+      "prefixLen": 0,
+      "protocol": "static",
+      "vrfName": "cust1",
+      "selected": true,
+      "destSelected": true,
+      "distance": 1,
+      "metric": 0,
+      "installed": true,
+      "table": 10,
+      "internalStatus": 16,
+      "internalFlags": 73,
+      "internalNextHopNum": 1,
+      "internalNextHopActiveNum": 1,
+      "nexthops": [
+        {
+          "flags": 3,
+          "fib": true,
+          "ip": "fc00:2::4",
+          "afi": "ipv6",
+          "interfaceName": "r1-eth1",
+          "active": true,
+          "weight": 1
+        }
+      ]
+    },
+    {
+      "prefix": "::/0",
+      "prefixLen": 0,
+      "protocol": "static",
+      "vrfName": "cust1",
+      "selected": null,
+      "destSelected": null,
+      "distance": 10,
+      "metric": 0,
+      "table": 10,
+      "internalStatus": 0,
+      "internalFlags": 65,
+      "internalNextHopNum": 1,
+      "internalNextHopActiveNum": 1,
+      "nexthops": [
+        {
+          "ip": "fc00:1::2",
+          "afi": "ipv6",
+          "interfaceName": "r1-eth0",
+          "active": true,
+          "weight": 1
+        }
+      ]
+    }
+  ]
+}

diff --git a/tests/topotests/bfd_static_vrf/r1/show_ipv6_route_step1.json b/tests/topotests/bfd_static_vrf/r1/show_ipv6_route_step1.json
new file mode 100644 (file)
index 0000000..f9b931e
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r1/show_ipv6_route_step1.json
@@ -0,0 +1,31 @@
+{
+  "::/0": [
+    {
+      "prefix": "::/0",
+      "prefixLen": 0,
+      "protocol": "static",
+      "vrfName": "cust1",
+      "selected": true,
+      "destSelected": true,
+      "distance": 10,
+      "metric": 0,
+      "installed": true,
+      "table": 10,
+      "internalStatus": 16,
+      "internalFlags": 73,
+      "internalNextHopNum": 1,
+      "internalNextHopActiveNum": 1,
+      "nexthops": [
+        {
+          "flags": 3,
+          "fib": true,
+          "ip": "fc00:1::2",
+          "afi": "ipv6",
+          "interfaceName": "r1-eth0",
+          "active": true,
+          "weight": 1
+        }
+      ]
+    }
+  ]
+}

diff --git a/tests/topotests/bfd_static_vrf/r2/frr.conf b/tests/topotests/bfd_static_vrf/r2/frr.conf
new file mode 100644 (file)
index 0000000..984e3e1
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r2/frr.conf
@@ -0,0 +1,10 @@
+interface r2-eth0 vrf cust1
+ ip address 192.168.0.2/24
+ ipv6 address fc00:1::0:2/96
+!
+bfd
+ peer 192.168.0.1 vrf cust1
+ !
+ peer fc00:1::1 vrf cust1
+ !
+!

diff --git a/tests/topotests/bfd_static_vrf/r3/frr.conf b/tests/topotests/bfd_static_vrf/r3/frr.conf
new file mode 100644 (file)
index 0000000..0b81409
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/r3/frr.conf
@@ -0,0 +1,10 @@
+interface r3-eth0 vrf cust1
+ ip address 192.168.5.4/24
+ ipv6 address fc00:2::0:4/96
+!
+bfd
+ peer 192.168.5.1 vrf cust1
+ !
+ peer fc00:2::1 vrf cust1
+ !
+!

diff --git a/tests/topotests/bfd_static_vrf/test_bfd_static_vrf.py b/tests/topotests/bfd_static_vrf/test_bfd_static_vrf.py
new file mode 100755 (executable)
index 0000000..deb618c
--- /dev/null
+++ b/tests/topotests/bfd_static_vrf/test_bfd_static_vrf.py
@@ -0,0 +1,185 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: ISC
+
+#
+# test_bfd_static_vrf.py
+# Part of NetDEF Topology Tests
+#
+# Copyright 2025 6WIND S.A.
+#
+
+"""
+test_bfd_static_vrf.py: Test the FRR static routes with BFD tracking.
+"""
+
+import os
+import sys
+import json
+import platform
+import functools
+import pytest
+
+pytestmark = [pytest.mark.staticd, pytest.mark.bfdd]
+
+# Save the Current Working Directory to find configuration files.
+CWD = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(CWD, "../"))
+
+# pylint: disable=C0413
+# Import topogen and topotest helpers
+from lib import topotest
+from lib.topogen import Topogen, TopoRouter, get_topogen
+from lib.topolog import logger
+
+
+def build_topo(tgen):
+    "Build function"
+
+    # Create 3 routers
+    for routern in range(1, 4):
+        tgen.add_router("r{}".format(routern))
+
+    switch = tgen.add_switch("s1")
+    switch.add_link(tgen.gears["r1"])
+    switch.add_link(tgen.gears["r2"])
+
+    switch = tgen.add_switch("s2")
+    switch.add_link(tgen.gears["r1"])
+    switch.add_link(tgen.gears["r3"])
+
+
+def setup_module(mod):
+    "Sets up the pytest environment"
+
+    tgen = Topogen(build_topo, mod.__name__)
+    tgen.start_topology()
+
+    router_list = tgen.routers()
+
+    for rname, router in router_list.items():
+        tgen.net[rname].cmd(
+            f"""
+ip link add cust1 type vrf table 10
+ip link set dev cust1 up
+ip link set dev {rname}-eth0 master cust1
+sysctl net.ipv6.conf.{rname}-eth0.keep_addr_on_down=1
+"""
+        )
+
+    tgen.net["r1"].cmd(
+        """
+ip link set dev r1-eth1 master cust1
+sysctl net.ipv6.conf.r1-eth1.keep_addr_on_down=1
+"""
+    )
+
+    for _, (rname, router) in enumerate(router_list.items(), 1):
+        router.load_frr_config(
+            os.path.join(CWD, "{}/frr.conf".format(rname)),
+            [
+                (TopoRouter.RD_ZEBRA, None),
+                (TopoRouter.RD_MGMTD, None),
+                (TopoRouter.RD_BFD, None),
+                (TopoRouter.RD_STATIC, None),
+            ],
+        )
+
+    # Initialize all routers.
+    tgen.start_router()
+
+
+def teardown_module(_mod):
+    "Teardown the pytest environment"
+
+    tgen = get_topogen()
+    tgen.stop_topology()
+
+
+def check_bfd_state(step=None):
+    tgen = get_topogen()
+
+    r1 = tgen.gears["r1"]
+
+    step_suffix = f"_step{step}" if step else ""
+
+    logger.info("Check BFD entries")
+    reffile = os.path.join(CWD, f"r1/show_bfd_peers{step_suffix}.json")
+    expected = json.loads(open(reffile).read())
+    cmd = "show bfd peers json"
+    test_func = functools.partial(topotest.router_json_cmp, r1, cmd, expected)
+    _, res = topotest.run_and_expect(test_func, None, count=30, wait=1)
+    assertmsg = f"BFD did not converge. Error on r1 {cmd}"
+    assert res is None, assertmsg
+
+    logger.info("Check IPv4 default route")
+    reffile = os.path.join(CWD, f"r1/show_ip_route{step_suffix}.json")
+    expected = json.loads(open(reffile).read())
+    cmd = "show ip route vrf cust1 0.0.0.0/0 json"
+    test_func = functools.partial(topotest.router_json_cmp, r1, cmd, expected)
+    _, res = topotest.run_and_expect(test_func, None, count=30, wait=1)
+    assertmsg = f"BFD did not converge. Error on r1 {cmd}"
+    assert res is None, assertmsg
+
+    logger.info("Check IPv6 default route")
+    reffile = os.path.join(CWD, f"r1/show_ipv6_route{step_suffix}.json")
+    expected = json.loads(open(reffile).read())
+    cmd = "show ipv6 route vrf cust1 ::/0 json"
+    test_func = functools.partial(topotest.router_json_cmp, r1, cmd, expected)
+    _, res = topotest.run_and_expect(test_func, None, count=30, wait=1)
+    assertmsg = f"BFD did not converge. Error on r1 {cmd}"
+    assert res is None, assertmsg
+
+
+def test_bfd_convergence():
+    "Assert that the BFD peers can find themselves."
+
+    tgen = get_topogen()
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    check_bfd_state()
+
+
+def test_bfd_static_vrf_step1():
+    """
+    Assert that BFD notices the link down after simulating network
+    failure.
+    """
+
+    tgen = get_topogen()
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    logger.info("Set r3-eth0 down")
+    tgen.gears["r3"].link_enable("r3-eth0", enabled=False)
+
+    check_bfd_state(step=1)
+
+
+def test_bfd_static_vrf_step2():
+    """
+    Assert that BFD goes back to the nominal stater after links are back up.
+    """
+
+    tgen = get_topogen()
+    if tgen.routers_have_failure():
+        pytest.skip(tgen.errors)
+
+    logger.info("Set r3-eth0 up")
+    tgen.gears["r3"].link_enable("r3-eth0", enabled=True)
+
+    check_bfd_state()
+
+
+def test_memory_leak():
+    "Run the memory leak test and report results."
+    tgen = get_topogen()
+    if not tgen.is_memleak_enabled():
+        pytest.skip("Memory leak test/report is disabled")
+
+    tgen.report_memory_leaks()
+
+
+if __name__ == "__main__":
+    args = ["-s"] + sys.argv[1:]
+    sys.exit(pytest.main(args))