redhat/quagga.spec
lib/version.h
doc/defines.texi
+ doc/bgpd.8
+ doc/isisd.8
+ doc/ospf6d.8
+ doc/ospfclient.8
+ doc/ospfd.8
+ doc/ldpd.8
+ doc/ripd.8
+ doc/ripngd.8
+ doc/pimd.8
+ doc/vtysh.1
+ doc/watchquagga.8
+ doc/zebra.8
+ doc/quagga.1
pkgsrc/bgpd.sh pkgsrc/ospf6d.sh pkgsrc/ospfd.sh
pkgsrc/ripd.sh pkgsrc/ripngd.sh pkgsrc/zebra.sh])
endif
EXTRA_DIST = BGP-TypeCode draft-zebra-00.ms draft-zebra-00.txt \
- bgpd.8 isisd.8 ospf6d.8 ospfclient.8 ospfd.8 ldpd.8 ripd.8 \
- ripngd.8 pimd.8 vtysh.1 watchquagga.8 zebra.8 quagga.1 \
+ \
+ bgpd.8.in \
+ isisd.8.in \
+ ospf6d.8.in \
+ ospfclient.8.in \
+ ospfd.8.in \
+ ldpd.8.in \
+ ripd.8.in \
+ ripngd.8.in \
+ pimd.8.in \
+ vtysh.1.in \
+ watchquagga.8.in \
+ zebra.8.in \
+ quagga.1.in \
+ \
mpls/ChangeLog.opaque.txt mpls/cli_summary.txt \
mpls/opaque_lsa.txt mpls/ospfd.conf \
$(figures_sources) $(figures_png) $(figures_txt)
+++ /dev/null
-.TH BGPD 8 "25 November 2004" "Quagga BGPD daemon" "Version 0.97.3"
-.SH NAME
-bgpd \- a BGPv4, BGPv4\+, BGPv4\- routing engine for use with Quagga routing
-software
-
-.SH SYNOPSIS
-.B bgpd
-[
-.B \-dhrSv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-p
-.I bgp-port-number
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B bgpd
-is a routing component that works with the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B bgpd
-command:
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/bgpd.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When bgpd starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart bgpd. The likely default is \fB\fI/var/run/bgpd.pid\fR.
-.TP
-\fB\-p\fR, \fB\-\-bgp_port \fR\fIbgp-port-number\fR
-Set the port that bgpd will listen to for bgp data.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the bgpd VTY will listen on. This defaults to
-2605, as specified in \fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the bgpd VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-r\fR, \fB\-\-retain\fR
-When the program terminates, retain routes added by \fBbgpd\fR.
-.TP
-\fB\-S\fR, \fB\-\-skip_runas\fR
-Skip setting the process effective user and group.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/lib/quagga/bgpd
-The default location of the
-.B bgpd
-binary.
-.TP
-.BI /etc/quagga/bgpd.conf
-The default location of the
-.B bgpd
-config file.
-.TP
-.BI $(PWD)/bgpd.log
-If the
-.B bgpd
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBbgpd\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The bgpd process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBbgpd\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-.B bgpd
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.zebra.org
-and
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH BGPD 8 "25 November 2004" "Quagga BGPD daemon" "Version 0.97.3"
+.SH NAME
+bgpd \- a BGPv4, BGPv4\+, BGPv4\- routing engine for use with Quagga routing
+software
+
+.SH SYNOPSIS
+.B bgpd
+[
+.B \-dhrSv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-p
+.I bgp-port-number
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B bgpd
+is a routing component that works with the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B bgpd
+command:
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/bgpd.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When bgpd starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart bgpd. The likely default is \fB\fI/var/run/bgpd.pid\fR.
+.TP
+\fB\-p\fR, \fB\-\-bgp_port \fR\fIbgp-port-number\fR
+Set the port that bgpd will listen to for bgp data.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the bgpd VTY will listen on. This defaults to
+2605, as specified in \fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the bgpd VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-r\fR, \fB\-\-retain\fR
+When the program terminates, retain routes added by \fBbgpd\fR.
+.TP
+\fB\-S\fR, \fB\-\-skip_runas\fR
+Skip setting the process effective user and group.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/lib/quagga/bgpd
+The default location of the
+.B bgpd
+binary.
+.TP
+.BI /etc/quagga/bgpd.conf
+The default location of the
+.B bgpd
+config file.
+.TP
+.BI $(PWD)/bgpd.log
+If the
+.B bgpd
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBbgpd\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The bgpd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBbgpd\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+.B bgpd
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.TH IS-IS 8 "25 November 2004" "Quagga IS-IS daemon" "Version 0.97.3"
-.SH NAME
-isisd \- an IS-IS routing engine for use with Quagga routing software.
-.SH SYNOPSIS
-.B isisd
-[
-.B \-dhv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B isisd
-is a routing component that works with the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B isisd
-command:
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/isisd.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When isisd starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart isisd. The likely default is \fB\fI/var/run/isisd.pid\fR.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the isisd VTY will listen on. This defaults to
-2608, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the isisd VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/lib/quagga/isisd
-The default location of the
-.B isisd
-binary.
-.TP
-.BI /etc/quagga/isisd.conf
-The default location of the
-.B isisd
-config file.
-.TP
-.BI $(PWD)/isisd.log
-If the
-.B isisd
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBisisd\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The isisd process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBisisd\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-\fBisisd\fR is ALPHA quality at the moment and hasn't any way ready for
-production use.
-
-.B isisd
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://isisd.sourceforge.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH IS-IS 8 "25 November 2004" "Quagga IS-IS daemon" "Version 0.97.3"
+.SH NAME
+isisd \- an IS-IS routing engine for use with Quagga routing software.
+.SH SYNOPSIS
+.B isisd
+[
+.B \-dhv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B isisd
+is a routing component that works with the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B isisd
+command:
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/isisd.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When isisd starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart isisd. The likely default is \fB\fI/var/run/isisd.pid\fR.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the isisd VTY will listen on. This defaults to
+2608, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the isisd VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/lib/quagga/isisd
+The default location of the
+.B isisd
+binary.
+.TP
+.BI /etc/quagga/isisd.conf
+The default location of the
+.B isisd
+config file.
+.TP
+.BI $(PWD)/isisd.log
+If the
+.B isisd
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBisisd\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The isisd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBisisd\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+\fBisisd\fR is ALPHA quality at the moment and hasn't any way ready for
+production use.
+
+.B isisd
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://isisd.sourceforge.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.TH LDPD 8 "29 March 2016" "Quagga LDP daemon" "Version 1.0.20160309"
-.SH NAME
-ldpd \- an LDP engine for use with Quagga routing software.
-.SH SYNOPSIS
-.B ldpd
-[
-.B \-dhv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B ldpd
-is a component that works with the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B ldpd
-command:
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/ldpd.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When ldpd starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart ldpd. The likely default is \fB\fI/var/run/ldpd.pid\fR.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the ldpd VTY will listen on. This defaults to
-2612, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the ldpd VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/local/sbin/ldpd
-The default location of the
-.B ldpd
-binary.
-.TP
-.BI /usr/local/etc/ldpd.conf
-The default location of the
-.B ldpd
-config file.
-.TP
-.BI $(PWD)/ldpd.log
-If the
-.B ldpd
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBldpd\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The ldpd process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBldpd\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-.B ldpd
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH LDPD 8 "29 March 2016" "Quagga LDP daemon" "Version 1.0.20160309"
+.SH NAME
+ldpd \- an LDP engine for use with Quagga routing software.
+.SH SYNOPSIS
+.B ldpd
+[
+.B \-dhv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B ldpd
+is a component that works with the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B ldpd
+command:
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/ldpd.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When ldpd starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart ldpd. The likely default is \fB\fI/var/run/ldpd.pid\fR.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the ldpd VTY will listen on. This defaults to
+2612, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the ldpd VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/local/sbin/ldpd
+The default location of the
+.B ldpd
+binary.
+.TP
+.BI /usr/local/etc/ldpd.conf
+The default location of the
+.B ldpd
+config file.
+.TP
+.BI $(PWD)/ldpd.log
+If the
+.B ldpd
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBldpd\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The ldpd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBldpd\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+.B ldpd
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.TH OSPF6D 8 "25 November 2004" "Quagga OSPFv3 daemon" "Version 0.97.3"
-.SH NAME
-ospf6d \- an OSPFv3 routing engine for use with Quagga routing software.
-.SH SYNOPSIS
-.B ospf6d
-[
-.B \-dhv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B ospf6d
-is a routing component that works with the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B ospf6d
-command:
-.SH OPTIONS
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/ospf6d.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When ospf6d starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart ospf6d. The likely default is \fB\fI/var/run/ospf6d.pid\fR.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the ospf6d VTY will listen on. This defaults to
-2606, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the ospf6d VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/lib/quagga/ospf6d
-The default location of the
-.B ospf6d
-binary.
-.TP
-.BI /etc/quagga/ospf6d.conf
-The default location of the
-.B ospf6d
-config file.
-.TP
-.BI $(PWD)/ospf6d.log
-If the
-.B ospf6d
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBospf6d\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The ospf6d process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBospf6d\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR isisd (8),
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-.B ospf6d
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.zebra.org
-and
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH OSPF6D 8 "25 November 2004" "Quagga OSPFv3 daemon" "Version 0.97.3"
+.SH NAME
+ospf6d \- an OSPFv3 routing engine for use with Quagga routing software.
+.SH SYNOPSIS
+.B ospf6d
+[
+.B \-dhv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B ospf6d
+is a routing component that works with the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B ospf6d
+command:
+.SH OPTIONS
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/ospf6d.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When ospf6d starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart ospf6d. The likely default is \fB\fI/var/run/ospf6d.pid\fR.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the ospf6d VTY will listen on. This defaults to
+2606, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the ospf6d VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/lib/quagga/ospf6d
+The default location of the
+.B ospf6d
+binary.
+.TP
+.BI /etc/quagga/ospf6d.conf
+The default location of the
+.B ospf6d
+config file.
+.TP
+.BI $(PWD)/ospf6d.log
+If the
+.B ospf6d
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBospf6d\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The ospf6d process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBospf6d\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR isisd (8),
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+.B ospf6d
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.\" This file was originally generated by help2man 1.36.
-.TH OSPFCLIENT "1" "July 2010"
-.SH NAME
-ospfclient \- an example ospf-api client
-.SH SYNOPSIS
-.B ospfclient
-.I ospfd
-.I lsatype
-.I opaquetype
-.I opaqueid
-.I ifaddr
-.I areaid
-.SH DESCRIPTION
-.B ospfclient
-is a an example ospf-api client to test the ospfd daemon.
-.SH OPTIONS
-.TP
-.I ospfd
-A router where the API\-enabled OSPF daemon is running.
-.TP
-.I lsatype
-The value has to be either "9", "10", or "11", depending on the flooding
-scope.
-.TP
-.I opaquetype
-The value has to be in the range of 0\-255 (for example, experimental
-applications use
-.I opaquetype
-larger than 128).
-.TP
-.I opaqueid
-Arbitrary application instance (24 bits).
-.TP
-.I ifaddr
-Interface IP address for type 9, otherwise it will be ignored.
-.TP
-.I areaid
-Area in the IP address format for type 10, otherwise it will be ignored.
-.SH "SEE ALSO"
-.BR ospfd (8).
-.SH AUTHORS
-See the project homepage at <http://www.quagga.net/>.
--- /dev/null
+.\" This file was originally generated by help2man 1.36.
+.TH OSPFCLIENT "1" "July 2010"
+.SH NAME
+ospfclient \- an example ospf-api client
+.SH SYNOPSIS
+.B ospfclient
+.I ospfd
+.I lsatype
+.I opaquetype
+.I opaqueid
+.I ifaddr
+.I areaid
+.SH DESCRIPTION
+.B ospfclient
+is a an example ospf-api client to test the ospfd daemon.
+.SH OPTIONS
+.TP
+.I ospfd
+A router where the API\-enabled OSPF daemon is running.
+.TP
+.I lsatype
+The value has to be either "9", "10", or "11", depending on the flooding
+scope.
+.TP
+.I opaquetype
+The value has to be in the range of 0\-255 (for example, experimental
+applications use
+.I opaquetype
+larger than 128).
+.TP
+.I opaqueid
+Arbitrary application instance (24 bits).
+.TP
+.I ifaddr
+Interface IP address for type 9, otherwise it will be ignored.
+.TP
+.I areaid
+Area in the IP address format for type 10, otherwise it will be ignored.
+.SH "SEE ALSO"
+.BR ospfd (8).
+.SH AUTHORS
+See the project homepage at <http://www.quagga.net/>.
+++ /dev/null
-.TH OSPFD 8 "25 November 2004" "Quagga OSPFv2 daemon" "Version 0.97.3"
-.SH NAME
-ospfd \- an OSPFv2 routing engine for use with Quagga routing software.
-.SH SYNOPSIS
-.B ospfd
-[
-.B \-dhlv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B ospfd
-is a routing component that works with the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B ospfd
-command:
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/ospfd.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When ospfd starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart ospfd. The likely default is \fB\fI/var/run/ospfd.pid\fR.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the ospfd VTY will listen on. This defaults to
-2604, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the ospfd VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-a\fR, \fB\-\-apiserver \fR
-Enable OSPF apiserver. Default is disabled.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/lib/quagga/ospfd
-The default location of the
-.B ospfd
-binary.
-.TP
-.BI /etc/quagga/ospfd.conf
-The default location of the
-.B ospfd
-config file.
-.TP
-.BI $(PWD)/ospfd.log
-If the
-.B ospfd
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBospfd\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The ospfd process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBospfd\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-.B ospfd
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.zebra.org
-and
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH OSPFD 8 "25 November 2004" "Quagga OSPFv2 daemon" "Version 0.97.3"
+.SH NAME
+ospfd \- an OSPFv2 routing engine for use with Quagga routing software.
+.SH SYNOPSIS
+.B ospfd
+[
+.B \-dhlv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B ospfd
+is a routing component that works with the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B ospfd
+command:
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/ospfd.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When ospfd starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart ospfd. The likely default is \fB\fI/var/run/ospfd.pid\fR.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the ospfd VTY will listen on. This defaults to
+2604, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the ospfd VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-a\fR, \fB\-\-apiserver \fR
+Enable OSPF apiserver. Default is disabled.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/lib/quagga/ospfd
+The default location of the
+.B ospfd
+binary.
+.TP
+.BI /etc/quagga/ospfd.conf
+The default location of the
+.B ospfd
+config file.
+.TP
+.BI $(PWD)/ospfd.log
+If the
+.B ospfd
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBospfd\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The ospfd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBospfd\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+.B ospfd
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.TH PIM 8 "10 December 2008" "Quagga PIM daemon" "Version 0.99.11"
-.SH NAME
-pimd \- a PIM routing for use with Quagga Routing Suite.
-.SH SYNOPSIS
-.B pimd
-[
-.B \-dhvZ
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-z
-.I path
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B pimd
-is a protocol-independent multicast component that works with the
-.B Quagga
-Routing Suite.
-.SH OPTIONS
-Options available for the
-.B pimd
-command:
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/pimd.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When pimd starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart pimd. The likely default is \fB\fI/var/run/pimd.pid\fR.
-.TP
-\fB\-z\fR, \fB\-\-socket \fR\fIpath\fR
-Specify the socket path for contacting the zebra daemon.
-The likely default is \fB\fI/var/run/zserv.api\fR.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the pimd VTY will listen on. This defaults to
-2611, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the pimd VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.TP
-\fB\-Z\fR, \fB\-\-debug_zclient\fR
-Enable logging information for zclient debugging.
-.SH FILES
-.TP
-.BI /usr/local/sbin/pimd
-The default location of the
-.B pimd
-binary.
-.TP
-.BI /usr/local/etc/pimd.conf
-The default location of the
-.B pimd
-config file.
-.TP
-.BI /var/run/pimd.pid
-The default location of the
-.B pimd
-pid file.
-.TP
-.BI /var/run/zserv.api
-The default location of the
-.B zebra
-unix socket file.
-.TP
-.BI $(PWD)/pimd.log
-If the
-.B pimd
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBpimd\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options.
-.SH DIAGNOSTICS
-The pimd process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs.
-.SH "SEE ALSO"
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-\fBpimd\fR is in early development at the moment and is not ready for
-production use.
-
-.B pimd
-eats bugs for breakfast. If you have food for the maintainers try
-.BI https://github.com/udhos/qpimd
-.SH AUTHORS
-See
-.BI https://github.com/udhos/qpimd
-for an accurate list of authors.
-
--- /dev/null
+.TH PIM 8 "10 December 2008" "Quagga PIM daemon" "Version 0.99.11"
+.SH NAME
+pimd \- a PIM routing for use with Quagga Routing Suite.
+.SH SYNOPSIS
+.B pimd
+[
+.B \-dhvZ
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-z
+.I path
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B pimd
+is a protocol-independent multicast component that works with the
+.B Quagga
+Routing Suite.
+.SH OPTIONS
+Options available for the
+.B pimd
+command:
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/pimd.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When pimd starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart pimd. The likely default is \fB\fI/var/run/pimd.pid\fR.
+.TP
+\fB\-z\fR, \fB\-\-socket \fR\fIpath\fR
+Specify the socket path for contacting the zebra daemon.
+The likely default is \fB\fI/var/run/zserv.api\fR.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the pimd VTY will listen on. This defaults to
+2611, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the pimd VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.TP
+\fB\-Z\fR, \fB\-\-debug_zclient\fR
+Enable logging information for zclient debugging.
+.SH FILES
+.TP
+.BI /usr/local/sbin/pimd
+The default location of the
+.B pimd
+binary.
+.TP
+.BI /usr/local/etc/pimd.conf
+The default location of the
+.B pimd
+config file.
+.TP
+.BI /var/run/pimd.pid
+The default location of the
+.B pimd
+pid file.
+.TP
+.BI /var/run/zserv.api
+The default location of the
+.B zebra
+unix socket file.
+.TP
+.BI $(PWD)/pimd.log
+If the
+.B pimd
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBpimd\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options.
+.SH DIAGNOSTICS
+The pimd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs.
+.SH "SEE ALSO"
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+\fBpimd\fR is in early development at the moment and is not ready for
+production use.
+
+.B pimd
+eats bugs for breakfast. If you have food for the maintainers try
+.BI https://github.com/udhos/qpimd
+.SH AUTHORS
+See
+.BI https://github.com/udhos/qpimd
+for an accurate list of authors.
+
+++ /dev/null
-.TH Quagga 1 "27 July 2006" "Quagga Systemd Script" "Version 0.99.23.1"
-.SH NAME
-quagga \- a systemd interaction script
-.SH SYNOPSIS
-.B quagga
-[
-.B start
-]
-.br
-.B quagga
-[
-.B stop
-]
-.br
-.B quagga
-[
-.B reload
-]
-.br
-.B quagga
-[
-.B restart
-]
-.br
-.B quagga
-[
-.B status
-]
-.br
-.SH DESCRIPTION
-.B Quagga
-is a systemd interaction script for the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B quagga
-command:
-.IP start
-Start enabled Quagga daemons
-.IP stop
-Stop enabled Quagga daemons
-.IP reload
-Reload modified configuration files
-.IP restart
-Stop all running daemons and then restart them
-.IP status
-Status of all the daemons
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR zebra (8)
-.SH BUGS
-.B quagga
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH Quagga 1 "27 July 2006" "Quagga Systemd Script" "Version 0.99.23.1"
+.SH NAME
+quagga \- a systemd interaction script
+.SH SYNOPSIS
+.B quagga
+[
+.B start
+]
+.br
+.B quagga
+[
+.B stop
+]
+.br
+.B quagga
+[
+.B reload
+]
+.br
+.B quagga
+[
+.B restart
+]
+.br
+.B quagga
+[
+.B status
+]
+.br
+.SH DESCRIPTION
+.B Quagga
+is a systemd interaction script for the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B quagga
+command:
+.IP start
+Start enabled Quagga daemons
+.IP stop
+Stop enabled Quagga daemons
+.IP reload
+Reload modified configuration files
+.IP restart
+Stop all running daemons and then restart them
+.IP status
+Status of all the daemons
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8)
+.SH BUGS
+.B quagga
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.TH RIPD 8 "25 November 2004" "Quagga RIP daemon" "Version 0.97.3"
-.SH NAME
-ripd \- a RIP routing engine for use with Quagga routing software.
-.SH SYNOPSIS
-.B ripd
-[
-.B \-dhrv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B ripd
-is a routing component that works with the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B ripd
-command:
-.SH OPTIONS
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/ripd.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When ripd starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart ripd. The likely default is \fB\fI/var/run/ripd.pid\fR.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the ripd VTY will listen on. This defaults to
-2602, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the ripd VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-r\fR, \fB\-\-retain\fR
-When the program terminates, retain routes added by \fBripd\fR.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/lib/quagga/ripd
-The default location of the
-.B ripd
-binary.
-.TP
-.BI /etc/quagga/ripd.conf
-The default location of the
-.B ripd
-config file.
-.TP
-.BI $(PWD)/ripd.log
-If the
-.B ripd
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBripd\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The ripd process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBripd\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-.B ripd
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.zebra.org
-and
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
--- /dev/null
+.TH RIPD 8 "25 November 2004" "Quagga RIP daemon" "Version 0.97.3"
+.SH NAME
+ripd \- a RIP routing engine for use with Quagga routing software.
+.SH SYNOPSIS
+.B ripd
+[
+.B \-dhrv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B ripd
+is a routing component that works with the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B ripd
+command:
+.SH OPTIONS
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/ripd.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When ripd starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart ripd. The likely default is \fB\fI/var/run/ripd.pid\fR.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the ripd VTY will listen on. This defaults to
+2602, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the ripd VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-r\fR, \fB\-\-retain\fR
+When the program terminates, retain routes added by \fBripd\fR.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/lib/quagga/ripd
+The default location of the
+.B ripd
+binary.
+.TP
+.BI /etc/quagga/ripd.conf
+The default location of the
+.B ripd
+config file.
+.TP
+.BI $(PWD)/ripd.log
+If the
+.B ripd
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBripd\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The ripd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBripd\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+.B ripd
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+++ /dev/null
-.TH RIPNGD 8 "25 November 2004" "Quagga RIPNG daemon" "Version 0.97.3"
-.SH NAME
-ripngd \- a RIPNG routing engine for use with Quagga routing software.
-.SH SYNOPSIS
-.B ripngd
-[
-.B \-dhlrv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B ripngd
-is a routing component that works with the
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B ripngd
-command:
-.SH OPTIONS
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/ripngd.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When ripngd starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart ripngd. The likely default is \fB\fI/var/run/ripngd.pid\fR.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the ripngd VTY will listen on. This defaults to
-2603, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the ripngd VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-r\fR, \fB\-\-retain\fR
-When the program terminates, retain routes added by \fBripd\fR.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/lib/quagga/ripngd
-The default location of the
-.B ripngd
-binary.
-.TP
-.BI /etc/quagga/ripngd.conf
-The default location of the
-.B ripngd
-config file.
-.TP
-.BI $(PWD)/ripngd.log
-If the
-.B ripngd
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBripngd\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The ripngd process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBripngd\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR zebra (8),
-.BR vtysh (1)
-.SH BUGS
-.B ripngd
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.zebra.org
-and
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH RIPNGD 8 "25 November 2004" "Quagga RIPNG daemon" "Version 0.97.3"
+.SH NAME
+ripngd \- a RIPNG routing engine for use with Quagga routing software.
+.SH SYNOPSIS
+.B ripngd
+[
+.B \-dhlrv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B ripngd
+is a routing component that works with the
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B ripngd
+command:
+.SH OPTIONS
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/ripngd.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When ripngd starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart ripngd. The likely default is \fB\fI/var/run/ripngd.pid\fR.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the ripngd VTY will listen on. This defaults to
+2603, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the ripngd VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-r\fR, \fB\-\-retain\fR
+When the program terminates, retain routes added by \fBripd\fR.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/lib/quagga/ripngd
+The default location of the
+.B ripngd
+binary.
+.TP
+.BI /etc/quagga/ripngd.conf
+The default location of the
+.B ripngd
+config file.
+.TP
+.BI $(PWD)/ripngd.log
+If the
+.B ripngd
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBripngd\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The ripngd process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBripngd\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8),
+.BR vtysh (1)
+.SH BUGS
+.B ripngd
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.TH VTYSH 1 "27 July 2006" "Quagga VTY shell" "Version 0.96.5"
-.SH NAME
-vtysh \- a integrated shell for Quagga routing software
-.SH SYNOPSIS
-.B vtysh
-[
-.B \-b
-]
-.br
-.B vtysh
-[
-.B \-E
-] [
-.B \-d
-.I daemon
-]
-] [
-.B \-c
-.I command
-]
-.SH DESCRIPTION
-.B vtysh
-is a integrated shell for
-.B Quagga
-routing engine.
-.SH OPTIONS
-Options available for the
-.B vtysh
-command:
-.IP "\fB\-b, \-\-boot\fP"
-Execute boot startup configuration. It makes sense only if integrated config
-file is in use (not default in Quagga). See Info file \fBQuagga\fR for more
-info.
-.IP "\fB\-c, \-\-command \fIcommand\fP"
-Specify command to be executed under batch mode. It behaves like -c option in
-any other shell -
-.I command
-is executed and
-.B vtysh
-exits.
-
-It's useful for gathering info from Quagga routing software or reconfiguring
-daemons from inside shell scripts, etc.
-Note that multiple commands may be executed by using more than one
--c option and/or embedding linefeed characters inside the
-.I command
-string.
-.IP "\fB\-d, \-\-daemon \fIdaemon_name\fP"
-Specify which daemon to connect to. By default,
-.B vtysh
-attempts to connect to all Quagga daemons running on the system. With this
-flag, one can specify a single daemon to connect to instead. For example,
-specifying '-d ospfd' will connect only to ospfd. This can be particularly
-useful inside scripts with -c where the command is targeted for a single daemon.
-.IP "\fB\-e, \-\-execute \fIcommand\fP"
-Alias for -c. It's here only for compatibility with Zebra routing software and
-older Quagga versions. This will be removed in future.
-.IP "\fB\-E, \-\-echo\fP"
-When the -c option is being used, this flag will cause the standard
-.B vtysh
-prompt and command to be echoed prior to displaying the results.
-This is particularly useful to separate the results
-when executing multiple commands.
-.IP "\fB\-h, \-\-help\fP"
-Display a usage message on standard output and exit.
-.SH ENVIRONMENT VARIABLES
-.IP "\fBVTYSH_PAGER\fR"
-This should be the name of the pager to use. Default is \fBmore\fR.
-.SH FILES
-.TP
-.BI /etc/quagga/vtysh.conf
-The default location of the
-.B vtysh
-config file.
-.TP
-.BI /etc/quagga/Quagga.conf
-The default location of the integrated Quagga routing engine config file
-if integrated config file is in use (not default).
-.TP
-.BI ${HOME}/.history_quagga
-Location of history of commands entered via cli
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR zebra (8)
-.SH BUGS
-.B vtysh
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.zebra.org
-and
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH VTYSH 1 "27 July 2006" "Quagga VTY shell" "Version 0.96.5"
+.SH NAME
+vtysh \- a integrated shell for Quagga routing software
+.SH SYNOPSIS
+.B vtysh
+[
+.B \-b
+]
+.br
+.B vtysh
+[
+.B \-E
+] [
+.B \-d
+.I daemon
+]
+] [
+.B \-c
+.I command
+]
+.SH DESCRIPTION
+.B vtysh
+is a integrated shell for
+.B Quagga
+routing engine.
+.SH OPTIONS
+Options available for the
+.B vtysh
+command:
+.IP "\fB\-b, \-\-boot\fP"
+Execute boot startup configuration. It makes sense only if integrated config
+file is in use (not default in Quagga). See Info file \fBQuagga\fR for more
+info.
+.IP "\fB\-c, \-\-command \fIcommand\fP"
+Specify command to be executed under batch mode. It behaves like -c option in
+any other shell -
+.I command
+is executed and
+.B vtysh
+exits.
+
+It's useful for gathering info from Quagga routing software or reconfiguring
+daemons from inside shell scripts, etc.
+Note that multiple commands may be executed by using more than one
+-c option and/or embedding linefeed characters inside the
+.I command
+string.
+.IP "\fB\-d, \-\-daemon \fIdaemon_name\fP"
+Specify which daemon to connect to. By default,
+.B vtysh
+attempts to connect to all Quagga daemons running on the system. With this
+flag, one can specify a single daemon to connect to instead. For example,
+specifying '-d ospfd' will connect only to ospfd. This can be particularly
+useful inside scripts with -c where the command is targeted for a single daemon.
+.IP "\fB\-e, \-\-execute \fIcommand\fP"
+Alias for -c. It's here only for compatibility with Zebra routing software and
+older Quagga versions. This will be removed in future.
+.IP "\fB\-E, \-\-echo\fP"
+When the -c option is being used, this flag will cause the standard
+.B vtysh
+prompt and command to be echoed prior to displaying the results.
+This is particularly useful to separate the results
+when executing multiple commands.
+.IP "\fB\-h, \-\-help\fP"
+Display a usage message on standard output and exit.
+.SH ENVIRONMENT VARIABLES
+.IP "\fBVTYSH_PAGER\fR"
+This should be the name of the pager to use. Default is \fBmore\fR.
+.SH FILES
+.TP
+.BI /etc/quagga/vtysh.conf
+The default location of the
+.B vtysh
+config file.
+.TP
+.BI /etc/quagga/Quagga.conf
+The default location of the integrated Quagga routing engine config file
+if integrated config file is in use (not default).
+.TP
+.BI ${HOME}/.history_quagga
+Location of history of commands entered via cli
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR zebra (8)
+.SH BUGS
+.B vtysh
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
+++ /dev/null
-.\" This file was originally generated by help2man 1.36.
-.TH WATCHQUAGGA 8 "July 2010"
-.SH NAME
-watchquagga \- a program to monitor the status of quagga daemons
-.SH SYNOPSIS
-.B watchquagga
-.RI [ option ...]
-.IR daemon ...
-.br
-.B watchquagga
-.BR \-h " | " \-v
-.SH DESCRIPTION
-.B watchquagga
-is a watchdog program that monitors the status of supplied quagga
-.IR daemon s
-and tries to restart them in case they become unresponsive or shut down.
-.PP
-To determine whether a daemon is running, it tries to connect to the
-daemon's VTY UNIX stream socket, and send echo commands to ensure the
-daemon responds. When the daemon crashes, EOF is received from the socket,
-so that watchquagga can react immediately.
-.PP
-This program can run in one of the following 5 modes:
-.TP
-.B Mode 0: monitor
-In this mode, the program serves as a monitor and reports status changes.
-.IP
-Example usage: watchquagga \-d zebra ospfd bgpd
-.TP
-.B Mode 1: global restart
-In this mode, whenever a daemon hangs or crashes, the given command is used
-to restart all watched daemons.
-.IP
-Example usage: watchquagga \-dz \e
-.br
--R '/sbin/service zebra restart; /sbin/service ospfd restart' \e
-.br
-zebra ospfd
-.TP
-.B Mode 2: individual daemon restart
-In this mode, whenever a single daemon hangs or crashes, the given command
-is used to restart this daemon only.
-.IP
-Example usage: watchquagga \-dz \-r '/sbin/service %s restart' \e
-.br
-zebra ospfd bgpd
-.TP
-.B Mode 3: phased zebra restart
-In this mode, whenever a single daemon hangs or crashes, the given command
-is used to restart this daemon only. The only exception is the zebra
-daemon; in this case, the following steps are taken: (1) all other daemons
-are stopped, (2) zebra is restarted, and (3) other daemons are started
-again.
-.IP
-Example usage: watchquagga \-adz \-r '/sbin/service %s restart' \e
-.br
-\-s '/sbin/service %s start' \e
-.br
-\-k '/sbin/service %s stop' zebra ospfd bgpd
-.TP
-.B Mode 4: phased global restart for any failure
-In this mode, whenever a single daemon hangs or crashes, the following
-steps are taken: (1) all other daemons are stopped, (2) zebra is restarted,
-and (3) other daemons are started again.
-.IP
-Example usage: watchquagga \-Adz \-r '/sbin/service %s restart' \e
-.br
-\-s '/sbin/service %s start' \e
-.br
-\-k '/sbin/service %s stop' zebra ospfd bgpd
-.PP
-Important: It is believed that mode 2 (individual daemon restart) is not
-safe, and mode 3 (phased zebra restart) may not be safe with certain
-routing daemons.
-.PP
-In order to avoid restarting the daemons in quick succession, you can
-supply the
-.B \-m
-and
-.B \-M
-options to set the minimum and maximum delay between the restart commands.
-The minimum restart delay is recalculated each time a restart is attempted.
-If the time since the last restart attempt exceeds twice the value of
-.BR \-M ,
-the restart delay is set to the value of
-.BR \-m ,
-otherwise the interval is doubled (but capped at the value of
-.BR \-M ).
-.SH OPTIONS
-.TP
-.BR \-d ", " \-\-daemon
-Run in daemon mode. When supplied, error messages are sent to Syslog
-instead of standard output (stdout).
-.TP
-.BI \-S " directory" "\fR, \fB\-\-statedir " directory
-Set the VTY socket
-.I directory
-(the default value is "/var/run/quagga").
-.TP
-.BR \-e ", " \-\-no\-echo
-Do not ping the daemons to test whether they respond. This option is
-necessary if one or more daemons do not support the echo command.
-.TP
-.BI \-l " level" "\fR, \fB\-\-loglevel " level
-Set the logging
-.I level
-(the default value is "6"). The value should range from 0 (LOG_EMERG) to 7
-(LOG_DEBUG), but higher number can be supplied if extra debugging messages
-are required.
-.TP
-.BI \-m " number" "\fR, \fB\-\-min\-restart\-interval " number
-Set the minimum
-.I number
-of seconds to wait between invocations of the daemon restart commands (the
-default value is "60").
-.TP
-.BI \-M " number" "\fR, \fB\-\-max\-restart\-interval " number
-Set the maximum
-.I number
-of seconds to wait between invocations of the daemon restart commands (the
-default value is "600").
-.TP
-.BI \-i " number" "\fR, \fB\-\-interval " number
-Set the status polling interval in seconds (the default value is "5").
-.TP
-.BI \-t " number" "\fR, \fB\-\-timeout " number
-Set the unresponsiveness timeout in seconds (the default value is "10").
-.TP
-.BI \-T " number" "\fR, \fB\-\-restart\-timeout " number
-Set the restart (kill) timeout in seconds (the default value is "20"). If
-any background jobs are still running after this period has elapsed, they
-will be killed.
-.TP
-.BI \-r " command" "\fR, \fB\-\-restart " command
-Supply a Bourne shell
-.I command
-to restart a single daemon. The command string should contain the '%s'
-placeholder to be substituted with the daemon name.
-.IP
-Note that
-.B \-r
-and
-.B \-R
-options are not compatible.
-.TP
-.BI \-s " command" "\fR, \fB\-\-start\-command " command
-Supply a Bourne shell
-.I command
-to start a single daemon. The command string should contain the '%s'
-placeholder to be substituted with the daemon name.
-.TP
-.BI \-k " command" "\fR, \fB\-\-kill\-command " command
-Supply a Bourne shell
-.I command
-to stop a single daemon. The command string should contain the '%s'
-placeholder to be substituted with the daemon name.
-.TP
-.BR \-R ", " \-\-restart\-all
-When one or more daemons are shut down, try to restart them using the
-Bourne shell command supplied on the command line.
-.IP
-Note that
-.B \-r
-and
-.B \-R
-options are not compatible.
-.TP
-.BR \-z ", " \-\-unresponsive\-restart
-When a daemon is in an unresponsive state, treat it as being shut down for
-the restart purposes.
-.TP
-.BR \-a ", " \-\-all\-restart
-When zebra hangs or crashes, restart all daemons taking the following
-steps: (1) stop all other daemons, (2) restart zebra, and (3) start other
-daemons again.
-.IP
-Note that this option also requires
-.BR \-r ,
-.BR \-s ,
-and
-.B \-k
-options to be specified.
-.TP
-.BR \-A ", " \-\-always\-all\-restart
-When any daemon (i.e., not just zebra) hangs or crashes, restart all
-daemons taking the following steps: (1) stop all other daemons, (2) restart
-zebra, and (3) start other daemons again.
-.IP
-Note that this option also requires
-.BR \-r ,
-.BR \-s ,
-and
-.B \-k
-options to be specified.
-.TP
-.BI \-p " filename" "\fR, \fB\-\-pid\-file " filename
-Set the process identifier
-.I filename
-(the default value is "/var/run/quagga/watchquagga.pid").
-.TP
-.BI \-b " string" "\fR, \fB\-\-blank\-string " string
-When the supplied
-.I string
-is found in any of the command line option arguments (i.e.,
-.BR \-r ,
-.BR \-s ,
-.BR \-k ,
-or
-.BR \-R ),
-replace it with a space.
-.IP
-This is an ugly hack to circumvent problems with passing the command line
-arguments containing embedded spaces.
-.TP
-.BR \-v ", " \-\-version
-Display the version information and exit.
-.TP
-.BR \-h ", " \-\-help
-Display the usage information and exit.
-.SH SEE ALSO
-.BR zebra (8),
-.BR bgpd (8),
-.BR isisd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR ripd (8),
-.BR ripngd (8)
-.PP
-See the project homepage at <http://www.quagga.net/>.
-.SH AUTHORS
-Copyright 2004 Andrew J. Schorr
--- /dev/null
+.\" This file was originally generated by help2man 1.36.
+.TH WATCHQUAGGA 8 "July 2010"
+.SH NAME
+watchquagga \- a program to monitor the status of quagga daemons
+.SH SYNOPSIS
+.B watchquagga
+.RI [ option ...]
+.IR daemon ...
+.br
+.B watchquagga
+.BR \-h " | " \-v
+.SH DESCRIPTION
+.B watchquagga
+is a watchdog program that monitors the status of supplied quagga
+.IR daemon s
+and tries to restart them in case they become unresponsive or shut down.
+.PP
+To determine whether a daemon is running, it tries to connect to the
+daemon's VTY UNIX stream socket, and send echo commands to ensure the
+daemon responds. When the daemon crashes, EOF is received from the socket,
+so that watchquagga can react immediately.
+.PP
+This program can run in one of the following 5 modes:
+.TP
+.B Mode 0: monitor
+In this mode, the program serves as a monitor and reports status changes.
+.IP
+Example usage: watchquagga \-d zebra ospfd bgpd
+.TP
+.B Mode 1: global restart
+In this mode, whenever a daemon hangs or crashes, the given command is used
+to restart all watched daemons.
+.IP
+Example usage: watchquagga \-dz \e
+.br
+-R '/sbin/service zebra restart; /sbin/service ospfd restart' \e
+.br
+zebra ospfd
+.TP
+.B Mode 2: individual daemon restart
+In this mode, whenever a single daemon hangs or crashes, the given command
+is used to restart this daemon only.
+.IP
+Example usage: watchquagga \-dz \-r '/sbin/service %s restart' \e
+.br
+zebra ospfd bgpd
+.TP
+.B Mode 3: phased zebra restart
+In this mode, whenever a single daemon hangs or crashes, the given command
+is used to restart this daemon only. The only exception is the zebra
+daemon; in this case, the following steps are taken: (1) all other daemons
+are stopped, (2) zebra is restarted, and (3) other daemons are started
+again.
+.IP
+Example usage: watchquagga \-adz \-r '/sbin/service %s restart' \e
+.br
+\-s '/sbin/service %s start' \e
+.br
+\-k '/sbin/service %s stop' zebra ospfd bgpd
+.TP
+.B Mode 4: phased global restart for any failure
+In this mode, whenever a single daemon hangs or crashes, the following
+steps are taken: (1) all other daemons are stopped, (2) zebra is restarted,
+and (3) other daemons are started again.
+.IP
+Example usage: watchquagga \-Adz \-r '/sbin/service %s restart' \e
+.br
+\-s '/sbin/service %s start' \e
+.br
+\-k '/sbin/service %s stop' zebra ospfd bgpd
+.PP
+Important: It is believed that mode 2 (individual daemon restart) is not
+safe, and mode 3 (phased zebra restart) may not be safe with certain
+routing daemons.
+.PP
+In order to avoid restarting the daemons in quick succession, you can
+supply the
+.B \-m
+and
+.B \-M
+options to set the minimum and maximum delay between the restart commands.
+The minimum restart delay is recalculated each time a restart is attempted.
+If the time since the last restart attempt exceeds twice the value of
+.BR \-M ,
+the restart delay is set to the value of
+.BR \-m ,
+otherwise the interval is doubled (but capped at the value of
+.BR \-M ).
+.SH OPTIONS
+.TP
+.BR \-d ", " \-\-daemon
+Run in daemon mode. When supplied, error messages are sent to Syslog
+instead of standard output (stdout).
+.TP
+.BI \-S " directory" "\fR, \fB\-\-statedir " directory
+Set the VTY socket
+.I directory
+(the default value is "/var/run/quagga").
+.TP
+.BR \-e ", " \-\-no\-echo
+Do not ping the daemons to test whether they respond. This option is
+necessary if one or more daemons do not support the echo command.
+.TP
+.BI \-l " level" "\fR, \fB\-\-loglevel " level
+Set the logging
+.I level
+(the default value is "6"). The value should range from 0 (LOG_EMERG) to 7
+(LOG_DEBUG), but higher number can be supplied if extra debugging messages
+are required.
+.TP
+.BI \-m " number" "\fR, \fB\-\-min\-restart\-interval " number
+Set the minimum
+.I number
+of seconds to wait between invocations of the daemon restart commands (the
+default value is "60").
+.TP
+.BI \-M " number" "\fR, \fB\-\-max\-restart\-interval " number
+Set the maximum
+.I number
+of seconds to wait between invocations of the daemon restart commands (the
+default value is "600").
+.TP
+.BI \-i " number" "\fR, \fB\-\-interval " number
+Set the status polling interval in seconds (the default value is "5").
+.TP
+.BI \-t " number" "\fR, \fB\-\-timeout " number
+Set the unresponsiveness timeout in seconds (the default value is "10").
+.TP
+.BI \-T " number" "\fR, \fB\-\-restart\-timeout " number
+Set the restart (kill) timeout in seconds (the default value is "20"). If
+any background jobs are still running after this period has elapsed, they
+will be killed.
+.TP
+.BI \-r " command" "\fR, \fB\-\-restart " command
+Supply a Bourne shell
+.I command
+to restart a single daemon. The command string should contain the '%s'
+placeholder to be substituted with the daemon name.
+.IP
+Note that
+.B \-r
+and
+.B \-R
+options are not compatible.
+.TP
+.BI \-s " command" "\fR, \fB\-\-start\-command " command
+Supply a Bourne shell
+.I command
+to start a single daemon. The command string should contain the '%s'
+placeholder to be substituted with the daemon name.
+.TP
+.BI \-k " command" "\fR, \fB\-\-kill\-command " command
+Supply a Bourne shell
+.I command
+to stop a single daemon. The command string should contain the '%s'
+placeholder to be substituted with the daemon name.
+.TP
+.BR \-R ", " \-\-restart\-all
+When one or more daemons are shut down, try to restart them using the
+Bourne shell command supplied on the command line.
+.IP
+Note that
+.B \-r
+and
+.B \-R
+options are not compatible.
+.TP
+.BR \-z ", " \-\-unresponsive\-restart
+When a daemon is in an unresponsive state, treat it as being shut down for
+the restart purposes.
+.TP
+.BR \-a ", " \-\-all\-restart
+When zebra hangs or crashes, restart all daemons taking the following
+steps: (1) stop all other daemons, (2) restart zebra, and (3) start other
+daemons again.
+.IP
+Note that this option also requires
+.BR \-r ,
+.BR \-s ,
+and
+.B \-k
+options to be specified.
+.TP
+.BR \-A ", " \-\-always\-all\-restart
+When any daemon (i.e., not just zebra) hangs or crashes, restart all
+daemons taking the following steps: (1) stop all other daemons, (2) restart
+zebra, and (3) start other daemons again.
+.IP
+Note that this option also requires
+.BR \-r ,
+.BR \-s ,
+and
+.B \-k
+options to be specified.
+.TP
+.BI \-p " filename" "\fR, \fB\-\-pid\-file " filename
+Set the process identifier
+.I filename
+(the default value is "/var/run/quagga/watchquagga.pid").
+.TP
+.BI \-b " string" "\fR, \fB\-\-blank\-string " string
+When the supplied
+.I string
+is found in any of the command line option arguments (i.e.,
+.BR \-r ,
+.BR \-s ,
+.BR \-k ,
+or
+.BR \-R ),
+replace it with a space.
+.IP
+This is an ugly hack to circumvent problems with passing the command line
+arguments containing embedded spaces.
+.TP
+.BR \-v ", " \-\-version
+Display the version information and exit.
+.TP
+.BR \-h ", " \-\-help
+Display the usage information and exit.
+.SH SEE ALSO
+.BR zebra (8),
+.BR bgpd (8),
+.BR isisd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR ripd (8),
+.BR ripngd (8)
+.PP
+See the project homepage at <http://www.quagga.net/>.
+.SH AUTHORS
+Copyright 2004 Andrew J. Schorr
+++ /dev/null
-.TH ZEBRA 8 "25 November 2004" "Zebra daemon" "Version 0.97.3"
-.SH NAME
-zebra \- a routing manager for use with associated Quagga components.
-.SH SYNOPSIS
-.B zebra
-[
-.B \-bdhklrv
-] [
-.B \-f
-.I config-file
-] [
-.B \-i
-.I pid-file
-] [
-.B \-P
-.I port-number
-] [
-.B \-A
-.I vty-address
-] [
-.B \-u
-.I user
-] [
-.B \-g
-.I group
-]
-.SH DESCRIPTION
-.B zebra
-is a routing manager that implements the
-.B zebra
-route engine.
-.B zebra
-supports RIPv1, RIPv2, RIPng, OSPF, OSPF6, IS-IS, BGP4+, and BGP4-.
-.SH OPTIONS
-Options available for the
-.B zebra
-command:
-.TP
-\fB\-b\fR, \fB\-\-batch\fR
-Runs in batch mode, \fBzebra\fR parses its config and exits.
-.TP
-\fB\-d\fR, \fB\-\-daemon\fR
-Runs in daemon mode, forking and exiting from tty.
-.TP
-\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
-Specifies the config file to use for startup. If not specified this
-option will likely default to \fB\fI/usr/local/etc/zebra.conf\fR.
-.TP
-\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
-Specify the group to run as. Default is \fIquagga\fR.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-A brief message.
-.TP
-\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
-When zebra starts its process identifier is written to
-\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
-restart zebra. The likely default is \fB\fI/var/run/zebra.pid\fR.
-.TP
-\fB\-k\fR, \fB\-\-keep_kernel\fR
-On startup, don't delete self inserted routes.
-.TP
-\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
-Specify the port that the zebra VTY will listen on. This defaults to
-2601, as specified in \fB\fI/etc/services\fR.
-.TP
-\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
-Specify the address that the zebra VTY will listen on. Default is all
-interfaces.
-.TP
-\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
-Specify the user to run as. Default is \fIquagga\fR.
-.TP
-\fB\-r\fR, \fB\-\-retain\fR
-When the program terminates, retain routes added by \fBzebra\fR.
-.TP
-\fB\-s\fR, \fB\-\-nl-bufsize \fR\fInetlink-buffer-size\fR
-Set netlink receive buffer size. There are cases where zebra daemon can't
-handle flood of netlink messages from kernel. If you ever see "recvmsg overrun"
-messages in zebra log, you are in trouble.
-
-Solution is to increase receive buffer of netlink socket. Note that kernel
-< 2.6.14 doesn't allow to increase it over maximum value defined in
-\fI/proc/sys/net/core/rmem_max\fR. If you want to do it, you have to increase
-maximum before starting zebra.
-
-Note that this affects Linux only.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-Print the version and exit.
-.SH FILES
-.TP
-.BI /usr/lib/quagga/zebra
-The default location of the
-.B zebra
-binary.
-.TP
-.BI /etc/quagga/zebra.conf
-The default location of the
-.B zebra
-config file.
-.TP
-.BI $(PWD)/zebra.log
-If the
-.B zebra
-process is config'd to output logs to a file, then you will find this
-file in the directory where you started \fBzebra\fR.
-.SH WARNING
-This man page is intended to be a quick reference for command line
-options. The definitive document is the Info file \fBQuagga\fR.
-.SH DIAGNOSTICS
-The zebra process may log to standard output, to a VTY, to a log
-file, or through syslog to the system logs. \fBzebra\fR supports many
-debugging options, see the Info file, or the source for details.
-.SH "SEE ALSO"
-.BR bgpd (8),
-.BR ripd (8),
-.BR ripngd (8),
-.BR ospfd (8),
-.BR ospf6d (8),
-.BR isisd (8),
-.BR vtysh (1)
-.SH BUGS
-.B zebra
-eats bugs for breakfast. If you have food for the maintainers try
-.BI http://bugzilla.quagga.net
-.SH AUTHORS
-See
-.BI http://www.zebra.org
-and
-.BI http://www.quagga.net
-or the Info file for an accurate list of authors.
-
--- /dev/null
+.TH ZEBRA 8 "25 November 2004" "Zebra daemon" "Version 0.97.3"
+.SH NAME
+zebra \- a routing manager for use with associated Quagga components.
+.SH SYNOPSIS
+.B zebra
+[
+.B \-bdhklrv
+] [
+.B \-f
+.I config-file
+] [
+.B \-i
+.I pid-file
+] [
+.B \-P
+.I port-number
+] [
+.B \-A
+.I vty-address
+] [
+.B \-u
+.I user
+] [
+.B \-g
+.I group
+]
+.SH DESCRIPTION
+.B zebra
+is a routing manager that implements the
+.B zebra
+route engine.
+.B zebra
+supports RIPv1, RIPv2, RIPng, OSPF, OSPF6, IS-IS, BGP4+, and BGP4-.
+.SH OPTIONS
+Options available for the
+.B zebra
+command:
+.TP
+\fB\-b\fR, \fB\-\-batch\fR
+Runs in batch mode, \fBzebra\fR parses its config and exits.
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/zebra.conf\fR.
+.TP
+\fB\-g\fR, \fB\-\-group \fR\fIgroup\fR
+Specify the group to run as. Default is \fIquagga\fR.
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When zebra starts its process identifier is written to
+\fB\fIpid-file\fR. The init system uses the recorded PID to stop or
+restart zebra. The likely default is \fB\fI/var/run/zebra.pid\fR.
+.TP
+\fB\-k\fR, \fB\-\-keep_kernel\fR
+On startup, don't delete self inserted routes.
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR
+Specify the port that the zebra VTY will listen on. This defaults to
+2601, as specified in \fB\fI/etc/services\fR.
+.TP
+\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR
+Specify the address that the zebra VTY will listen on. Default is all
+interfaces.
+.TP
+\fB\-u\fR, \fB\-\-user \fR\fIuser\fR
+Specify the user to run as. Default is \fIquagga\fR.
+.TP
+\fB\-r\fR, \fB\-\-retain\fR
+When the program terminates, retain routes added by \fBzebra\fR.
+.TP
+\fB\-s\fR, \fB\-\-nl-bufsize \fR\fInetlink-buffer-size\fR
+Set netlink receive buffer size. There are cases where zebra daemon can't
+handle flood of netlink messages from kernel. If you ever see "recvmsg overrun"
+messages in zebra log, you are in trouble.
+
+Solution is to increase receive buffer of netlink socket. Note that kernel
+< 2.6.14 doesn't allow to increase it over maximum value defined in
+\fI/proc/sys/net/core/rmem_max\fR. If you want to do it, you have to increase
+maximum before starting zebra.
+
+Note that this affects Linux only.
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+.SH FILES
+.TP
+.BI /usr/lib/quagga/zebra
+The default location of the
+.B zebra
+binary.
+.TP
+.BI /etc/quagga/zebra.conf
+The default location of the
+.B zebra
+config file.
+.TP
+.BI $(PWD)/zebra.log
+If the
+.B zebra
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBzebra\fR.
+.SH WARNING
+This man page is intended to be a quick reference for command line
+options. The definitive document is the Info file \fBQuagga\fR.
+.SH DIAGNOSTICS
+The zebra process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBzebra\fR supports many
+debugging options, see the Info file, or the source for details.
+.SH "SEE ALSO"
+.BR bgpd (8),
+.BR ripd (8),
+.BR ripngd (8),
+.BR ospfd (8),
+.BR ospf6d (8),
+.BR isisd (8),
+.BR vtysh (1)
+.SH BUGS
+.B zebra
+eats bugs for breakfast. If you have food for the maintainers try
+.BI http://bugzilla.quagga.net
+.SH AUTHORS
+See
+.BI http://www.zebra.org
+and
+.BI http://www.quagga.net
+or the Info file for an accurate list of authors.
+
projects / mirror / frr.git / commitdiff