bgpd: parse label in pmsi tunnel attribute

bgpd: parse label in pmsi tunnel attribute

Consider the following topo VTEP1->SPINE1->VTEP2. ebgp is being used
for evpn route exchange with SPINE just acting as a pass through.

1. VTEP1 was building the type-3 IMET route with the correct PMSI
tunnel type (ingress-replication) and label (VNI)
2. Spine1 was however only parsing the tunnel-type in the attr (was
skipping parsing of the label field altogether) -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@MSP1:~# net show bgp l2vpn evpn route rd 27.0.0.15:4 type multicast
EVPN type-2 prefix: [2]:[ESI]:[EthTag]:[MAClen]:[MAC]
EVPN type-3 prefix: [3]:[EthTag]:[IPlen]:[OrigIP]
EVPN type-5 prefix: [5]:[ESI]:[EthTag]:[IPlen]:[IP]

BGP routing table entry for 27.0.0.15:4:[3]:[0]:[32]:[27.0.0.15]
Paths: (1 available, best #1)
  Advertised to non peer-group peers:
  TORC11(downlink-1) TORC12(downlink-2) TORC21(downlink-3) TORC22(downlink-4) TORS1(downlink-5) TORS2(downlink-6)
  Route [3]:[0]:[32]:[27.0.0.15]
  5550
    27.0.0.15 from TORS1(downlink-5) (27.0.0.15)
      Origin IGP, valid, external, bestpath-from-AS 5550, best
      Extended Community: RT:5550:1003 ET:8
      AddPath ID: RX 0, TX 227
      Last update: Thu Feb  7 15:44:22 2019
      PMSI Tunnel Type: Ingress Replication, label: 16777213 >>>>>>>

Displayed 1 prefixes (1 paths) with this RD (of requested type)
root@MSP1:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
3. So VTEP2 didn't rx the correct label.

In an all FRR setup this doesn't have any functional consequence but some
vendors are validating the content of the label field as well and ignoring
the IMET route from FRR (say VTEP1 is FRR and VTEP2 is 3rd-party). The
functional consequence of this VTEP2 ignores VTEP1's IMET route and doesn't
add VTEP1 to the corresponding l2-vni flood list.

This commit fixes up the PMSI attr parsing on spine-1 -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@MSP1:~# net show bgp l2vpn evpn route rd 27.0.0.15:4 type multicast
EVPN type-2 prefix: [2]:[ESI]:[EthTag]:[MAClen]:[MAC]
EVPN type-3 prefix: [3]:[EthTag]:[IPlen]:[OrigIP]
EVPN type-5 prefix: [5]:[ESI]:[EthTag]:[IPlen]:[IP]

BGP routing table entry for 27.0.0.15:4:[3]:[0]:[32]:[27.0.0.15]
Paths: (1 available, best #1)
  Advertised to non peer-group peers:
  TORC11(downlink-1) TORC12(downlink-2) TORC21(downlink-3) TORC22(downlink-4) TORS1(downlink-5) TORS2(downlink-6)
  Route [3]:[0]:[32]:[27.0.0.15]
  5550
    27.0.0.15 from TORS1(downlink-5) (27.0.0.15)
      Origin IGP, valid, external, bestpath-from-AS 5550, best
      Extended Community: RT:5550:1003 ET:8
      AddPath ID: RX 0, TX 278
      Last update: Thu Feb  7 00:17:40 2019
      PMSI Tunnel Type: Ingress Replication, label: 1003 >>>>>>>>>>>

Displayed 1 prefixes (1 paths) with this RD (of requested type)
root@MSP1:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Ticket: CM-23790

Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>